Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in The Crossings, FL: What They Cost and How the Approval Process Works
Custom & Geometric Windows in The Crossings typically run $6,500 to $22,000 installed, depending on how many units, whether the openings are arched or angled, and what glazing you choose. Most jobs here take three to five weeks from template measurement to final inspection, and a big chunk of that time is architectural review, not construction. Call (844) 761-9356 and we’ll walk your plans against your association’s rules before a single pane is ordered.
How the Job Actually Runs, From First Measurement to Final Inspection
Custom & Geometric Windows don’t move like a standard replacement, because nothing about a radius or an angled bay is off-the-shelf. Here’s the sequence we run in The Crossings, with the durations we actually see.
Stage 1: Template measurement and the association packet (days 1 to 3)
We measure every opening to the sixteenth of an inch, including the arch rise or the angle on a corner unit, then photograph the existing frames and the surrounding stucco. On day 1 that’s about three hours for a typical six-window job. By day 3 you have a dimensioned drawing set and a filled-out architectural review packet ready to submit to your association.
Stage 2: Architectural review and permitting (two to four weeks, often overlapping)
This is the stage that surprises people. In The Crossings the association reviews exterior changes on top of the Miami-Dade County and City of Miami permitting, and the two can run in parallel if the association allows a conditional approval. You decide here on frame color, grid pattern, and glass type, because those choices go in the packet and changing them later resets the clock.
Stage 3: Fabrication (three to five weeks)
Arched and angled units are built to order. We confirm the shop drawing with you before release, and you sign off on the exact radius and sightlines. Standard rectangular units in the same order usually arrive faster, so a mixed job can be staged.
Stage 4: Removal and installation (one to three days per elevation)
We protect floors and furniture, pull the old units, and check the rough opening for rot or cracked stucco before anything goes in. Flashing and sealant detailing happen the same day as the set, not later. Odd-shaped openings take longer because the shimming and the interior trim fit is fussier.
Stage 5: Stucco tie-in, inspection, and walkthrough (two to four days after set)
Exterior stucco gets patched and blended to the surrounding wall, then the county inspection is scheduled. You walk the job with us, operate every unit, and get the product and workmanship paperwork in one packet. Our 730-Day Done Right Promise covers the installation side for two full years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Be Choosing Between
Custom & Geometric Windows open up more decisions than a standard replacement, and the honest trade-offs matter more than the brochure.
- Frame material: aluminum vs. vinyl vs. wood-clad. Aluminum holds a crisp radius and suits the Mediterranean look of most The Crossings homes, and it’s the strongest choice for large arched units; it costs more and conducts heat. Vinyl costs less and insulates well, but very tight radii can look slightly softened. Wood-clad gives the warmest interior finish and the highest price, and it needs more care in South Florida humidity.
- Glass: single vs. laminated impact vs. insulated impact. If your association and insurer allow it, laminated impact glazing in a geometric unit is the sweet spot for storm protection without the bulk. Insulated impact glass adds thermal comfort and cost. Plain single-pane in a custom unit is rare now, mostly on interior feature windows.
- Grid and muntin pattern. True divided lites cost more and read as traditional; simulated divided lites with an interior grille give the same look for less. Match what’s already on the street if the association is strict.
- Finish: factory color vs. custom paint. A stock bronze or white finish is faster and cheaper. A custom color matched to your trim adds lead time, and the association may want a sample panel.
- Brand and system. We work with Andersen and Marvin on the geometric side, and Mr-Glass for specialty glazing where a tight radius calls for it. Each has a different lead time and a different warranty term.
Homeowners often pair this with Concrete Driveways & Concrete Work in The Crossings when the stucco repair extends down to the walk, and with Asphalt Driveways & Resurfacing in The Crossings when they’re tidying the approach at the same time.
What Custom & Geometric Windows Cost in The Crossings, FL
Plan on $6,500 to $22,000 for a typical custom and geometric window package in The Crossings. A single arched accent window can land near the low end; a full elevation of radius-top and angled units with impact glazing pushes toward the high end. Here’s what moves the number:
- Number and complexity of units. A rectangular unit is the baseline; each arch, eyebrow, or angled corner adds fabrication and installation time.
- Glazing choice. Impact-rated insulated glass adds real money per square foot over standard glazing.
- Frame material. Aluminum and wood-clad run higher than vinyl.
- Existing opening condition. Cracked stucco, rot, or a rough opening that’s out of square adds repair time.
- Permit and review scope. A change to the opening size means structural work and a bigger permit; a like-for-like swap is simpler.
A written estimate from us is line-item and upfront: units, labor, stucco tie-in, permit fees, and disposal. What typically isn’t included is interior painting, blinds or shutters, and any structural framing if the opening has to grow, which we price separately once we’ve opened the wall and seen what’s there. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat The Crossings Homes Specifically Do to This Job
The Crossings is a master-planned Kendall subdivision built mostly in the late 1980s and 1990s, almost all of it inside ZIP 33186, and that single fact shapes every custom window job here. These are original Mediterranean-style stucco CBS homes with clay tile roofs and single-pane windows that are now 30-plus years old, so we’re doing like-for-like renovation rather than new construction. That means pulling permits through Miami-Dade County and the City of Miami for a home that’s already built out, in a tract where your association’s architectural review board sits on top of the county process.
Two things follow. First, exterior changes need the association’s sign-off on style and color, and an arch or an angled bay is exactly the kind of change that gets looked at closely. Second, the subtropical heat, summer rain, and hurricane exposure make impact glazing and continuous flashing the standard, not the upgrade. We schedule exterior work around the June-to-November storm window. Homes near the community’s interior streets are the ones we see flagged at resale for original windows, so timing the job before a wind-mitigation inspection often pays for itself. If your project grows into a wider scope, that’s part of a full Windows & Doors in The Crossings plan we can price together, and you can see our wider Windows & Doors service for the overview. We cover the whole of The Crossings.
Serving The Crossings, FL – Our Local Coverage Area
We serve The Crossings and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in The Crossings
Expect three to five weeks from measurement to final inspection, and up to seven if the association review adds a cycle or a radius unit runs long at the factory. Installation itself is usually one to three days per elevation. Call (844) 761-9356 for a schedule built around your review timeline.
Yes to both, in almost every case. Miami-Dade County and the City of Miami require a permit for window replacement, and your association’s architectural review board must approve the style, color, and glazing before work starts. We prepare the drawing set and packet for you. Call (844) 761-9356 and we’ll tell you what your association will want to see.
Usually yes. Most jobs here are like-for-like swaps that keep the existing rough opening, so no structural framing and no plumbing or electrical moves. If the opening has to grow for a larger arch or an angled unit, that’s a bigger permit and a separate line on the estimate. Call (844) 761-9356 and we’ll confirm which path your home needs.
Most packages land between $6,500 and $22,000, driven by unit count, arch or angle complexity, glazing, and frame material. A single accent unit runs less; a full elevation with impact glass runs more. Call (844) 761-9356 for an exact line-item quote, estimates are free.
Our 730-Day Done Right Promise covers the installation for two years, on top of the manufacturer’s warranty on the units themselves. If something isn’t right, we make it right. Call (844) 761-9356 to see the terms before you sign anything.
Get a Free Estimate on Custom & Geometric Windows in The Crossings
Call (844) 761-9356 to schedule a free on-site estimate for Custom & Geometric Windows in The Crossings. A live person answers, day or night. We’ll measure, talk through the association review, and hand you a written line-item estimate with no surprises, so you know the number before you commit. Technicians are background-checked and arrive in uniform.
Written by the team at Groundwork Construction Co.