Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in The Crossings, FL: What It Costs and What Approval Takes
Fence repair in The Crossings, FL typically runs $3,500 – $9,000 for a full run replacement done to community standards, though a single collapsed section, storm-toppled post, or sagging gate usually lands between $450 and $1,800. Most repairs wrap inside one to three working days once the material match is confirmed. The piece that trips homeowners up here isn’t the carpentry – it’s the architectural review that has to clear before anyone touches the fence line. Call (844) 761-9356 and we’ll walk you through both sides of that.
How we run a Fence Repair in The Crossings, start to finish
Every repair in this community moves through the same five stages. The order matters, because doing the physical work before the paperwork clears is how homeowners here end up paying twice.
Stage 1 – Site visit and photo documentation (day 1, about 45 minutes). We photograph the failing section, the post footings, the gate hardware, and a clean sample of the existing finish or panel profile. That photo set becomes the basis for both your estimate and the architectural submission. You decide at this point whether we’re repairing one run or the whole perimeter.
Stage 2 – Matching the original profile (1 to 3 days). This is the slow part, and it’s where most of the job’s risk lives. Fences built in The Crossings in the late 1980s and 1990s were installed to a developer spec that’s now three decades old. We identify the panel style, height, picket or slat spacing, and finish so the new section reads as original from the street. You approve the match before we order. If an exact match isn’t available, you choose between a close profile and replacing the entire visible run so nothing looks patched.
Stage 3 – Architectural review submission (3 to 10 business days, homeowner-dependent). We prepare the scope description and photos for the association’s architectural review board. In most tracts off Southwest 137th Avenue and the 33186 corridor, the board meets on a monthly or biweekly cycle, so the calendar here depends on the meeting date, not on us. You sign the application. We don’t start demolition until you have written approval in hand.
Stage 4 – Demolition and rebuild (1 to 2 days for a single run, 3 to 5 days for a full perimeter). We pull the damaged panels and posts, cut the old concrete footings down below grade, and set new posts in fresh concrete. Footings need roughly 24 hours to cure before we hang panels, which is why a run replacement is never a same-morning job. Gates get new hinges and a latch that closes quietly – more on that below.
Stage 5 – Punch walk and cleanup (same day as final install, about 30 minutes). You walk the line with us. We check plumb, panel alignment, gate swing, and finish consistency against the approved sample, then haul away every scrap. Any callbacks on workmanship fall under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make on a fence repair
Repair scope is narrower than a new install, but the decisions still shape both the price and whether the job passes review. Here’s what comes up most in The Crossings:
- Spot repair vs. full run replacement. Patching two or three panels is the cheapest path and often all you need. The catch: patched sections on a 30-year-old fence rarely weather to match the rest, and a board that’s already failed twice in the same run usually signals the posts are gone too. Replacing the full run costs more upfront but ends the repeat visits.
- Panel and picket profile. A close-profile match keeps the street elevation consistent with your neighbors. An exact-profile match keeps the fence looking original but may take longer to source. If your tract’s design guidelines name a specific style, that narrows the field for you.
- Post material and footing depth. Standard pressure-treated posts are the workhorse choice. Where wind exposure is the concern, deeper footings and heavier post stock cost more but hold up through a storm season.
- Finish and color. Paint or stain has to match the approved community palette. A stain that reads slightly darker than the neighbor’s fence can trigger a violation notice even when the repair itself is sound.
- Gate hardware. Quiet-close hinges and a soft-latch cost a little more than standard hardware and matter in tracts where fences sit close to neighboring lanais.
What Fence Repair costs in The Crossings, FL
Expect $3,500 – $9,000 for a full run replacement built to community standards, and $450 – $1,800 for a targeted repair of one section, gate, or post line. Five things push a job toward one end or the other:
- Linear feet and post count. This is the biggest multiplier. A 60-foot run with eight posts prices very differently from a 150-foot perimeter.
- Condition of the posts and footings. Failed posts mean concrete work, not just panel swapping, and that’s a meaningful jump.
- Material match difficulty. An off-the-shelf profile is quick. A developer-era spec that has to be sourced or milled adds cost and time.
- Architectural review scope. A full perimeter replacement usually needs a fuller submission than a single repaired section, and some boards require a survey or elevation drawing.
- Gate work. Rehanging or rebuilding a gate with new hardware is its own line item.
A written estimate from us lists each line: linear feet, post count and setting, panel and profile, gate hardware, finish, review submission support, and disposal. It doesn’t include association application fees, which you pay directly to the board, or any structural correction discovered after we open up a footing. Upfront pricing means the number you see is the number you pay for the scope we’ve written.
See the difference
Before
After
Before
After
Before
AfterWhat The Crossings homes specifically do to this job
This is a master-planned Kendall subdivision built almost entirely between the late 1980s and 1990s, and it sits inside a single ZIP, 33186. That means fence work here is like-for-like renovation of original Mediterranean-style stucco CBS homes, not new construction. Exterior changes go through Miami-Dade County and City of Miami permitting and a homeowners-association architectural review on top of it. That two-layer approval is the defining reality of the job, and it’s different from the unincorporated pockets around us. Fences in these tracts are now 30-plus years old, and the failure modes follow: posts rotted at the soil line from South Florida humidity and heavy summer rain, panels warped from sun exposure, and gates that have sagged out of square. We schedule exterior work around the June-to-November storm window, and we keep a photo record of wind-rated attachment details because insurance inspections ask for them. If your project has grown past the fence line, homeowners often pair this with ADU Design & Permitting in The Crossings or a Garage Conversion ADU in The Crossings, both of which carry their own review requirements. We cover the whole of The Crossings.
Serving The Crossings, FL – Our Local Coverage Area
We serve The Crossings and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Fence Repair in The Crossings
Yes. Any exterior change in a homeowners-association tract here needs architectural review on top of county permitting, and fence repairs that alter the visible elevation fall into that category. We prepare the submission photos and scope description, you sign the application, and we don’t start until you have written approval. Call (844) 761-9356 and we’ll tell you what your board typically asks for.
The physical work is usually one to two days for a single run and three to five days for a full perimeter. The variable is the architectural review cycle, which runs three to ten business days and depends on the board’s meeting schedule. Total calendar time from first visit to finished fence is typically two to four weeks.
In most cases, yes. We identify the original profile, height, and finish from your existing fence and get approval on a sample before ordering. When an exact match isn’t available, we’ll show you the close-profile alternative and let you decide whether to replace the full visible run. Finish color has to read within the approved community palette, so we confirm that during the site visit.
Full run replacement runs $3,500 – $9,000 and a targeted single-section or gate repair runs $450 – $1,800. Post and footing condition, linear feet, and match difficulty are what move the number most. Call (844) 761-9356 for an exact quote – estimates are free.
Yes. Workmanship is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers the installation itself; material manufacturer warranties apply separately and we hand you the paperwork. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. For a broader project, see our Fence Installation service and the full Fence Installation in The Crossings page.
Get a free on-site estimate for your fence repair
Call (844) 761-9356 to schedule a free on-site estimate for fence repair in The Crossings. We’ll photograph the failing sections, confirm what profile and finish your association will accept, and hand you an upfront written quote with each line itemized. Prefer to plan ahead? We also offer a free project estimate and design consult, 0% financing for 18 months, and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of The Hammocks.