Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Country Walk: What the Job Actually Involves
Custom and geometric windows in Country Walk usually run $6,500 to $19,000 for a typical four-to-eight opening project, with most jobs finished in two to four days of actual installation once the units land on site. The real timeline is longer: figure six to ten weeks from signed contract to final inspection, because angled and arched units are built to order and nothing about them comes off a shelf. Call (844) 761-9356 for a free on-site estimate and a written line-item quote.
How a Geometric Window Project Moves From First Measure to Final Caulk Line
Custom glazing on a Country Walk home follows a fixed sequence, and the only thing that changes job to job is how much framing repair sits behind the old units. Here is what each stage looks like and what you decide along the way.
Stage 1: Field measure and template (day 1, roughly 2 hours)
We measure every opening in place, photograph the framing, and check whether the existing rough opening is square. A true arch, a half-round, an octagon, or a trapezoid that matches a gable all get a template drawn from the actual opening, not from a plan. You’ll decide here between matching the existing trim profile and starting fresh with a cleaner line.
Stage 2: Shop drawings and your approval (days 3 to 10)
The manufacturer returns elevation drawings showing mullion placement, glass type, interior wood or vinyl finish, and grille pattern. This is the one point where changes are free. Once you sign the drawings, radius and angle units are non-returnable, so we walk them with you line by line before anything goes to production.
Stage 3: Fabrication (weeks 4 to 8)
Standard rectangles come fast; a radius top, a triangular corner, or a segmented arch adds three to five weeks because the frame gets bent and the insulated glass unit is cut to a curve. We give you a firm ship window and update you if it shifts.
Stage 4: Demo, framing, and set (days 1 and 2 of install)
We pull the old sash, inspect for rot in the concrete-block or wood buck behind it, square and shim the new frame, and set the unit. On Country Walk homes built in the 1980s and ’90s, we regularly find stucco cracking at the corners of openings from years of thermal cycling, and that gets patched and flashed before the new window goes in.
Stage 5: Seal, finish, and inspection (day 3, then the county visit)
Flashing tape, sealant, interior trim, and stucco patching around the exterior perimeter all happen on day three. Then the Miami-Dade County inspection happens, and you get a walkthrough of every opening before we call the job complete. Our technicians have up to 12 years of experience, and the work is backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change How a Geometric Window Looks and Lasts
Most of the decisions on this job are settled before a single unit is ordered. Here’s the honest trade-off on each.
- Frame material – vinyl vs. aluminum vs. wood-clad. Vinyl is the value pick and holds up well against South Florida humidity. Aluminum gives you thinner sightlines and works better for very large or unusually shaped units. Wood-clad (we work with Andersen and Marvin) delivers the best interior look and the highest price.
- Glass package – impact-rated vs. standard laminated. Impact glass is what most Country Walk homeowners want given hurricane season, and it also cuts afternoon heat gain. It adds cost per square foot but eliminates the need for separate storm panels on shaped openings, which are genuinely painful to fabricate and store.
- Shape complexity. A half-round or eyebrow arch is a modest upcharge. A true segmented arch, an octagon, or a trapezoid that has to match a roofline drives the price up because of the template and fabrication time.
- Grille pattern and muntins. Simulated divided lites or true divided lites change the look of a geometric window more than anything else. True divided lites cost more and are harder to seal, but they read as authentic on older homes.
- Interior finish. Paint-grade pine trim is the standard; a stained hardwood interior costs more and needs more care near a kitchen or bath.
What Custom & Geometric Windows Cost in Country Walk, FL
Expect $6,500 to $19,000 for a typical project here, and $1,200 to $3,500 per individual shaped or custom unit depending on size and glass. That range covers a normal mix of standard and geometric openings.
What pushes a Country Walk job toward the top of the range:
- Number and size of openings. A single arched accent window and eight matched units are very different jobs.
- Shape and radius work. True arches, circles, and trapezoids add fabrication weeks and dollars.
- Framing condition behind the old window. Rot or a failed buck means carpentry and stucco repair.
- Structural changes. Enlarging an opening or combining two windows requires a header and a permit revision.
- Glass type. Impact-rated and low-E packages cost more than standard insulated glass.
A written estimate from us lists the units, glass spec, trim, labor, permit, and disposal, with no change orders once you’ve approved the drawings. What it typically doesn’t include is interior painting or blinds. Homeowners often pair this with a driveway refresh, and we also handle Concrete Driveways & Concrete Work in Country Walk and Asphalt Driveways & Resurfacing in Country Walk when the project grows.
See the difference
Before
After
Before
After
Before
AfterWhy Country Walk Homes Shape This Job Differently
Country Walk is a master-planned west Kendall subdivision built out mostly in the 1980s and ’90s, which means nearly every custom window project here is a retrofit into a mature concrete-block and stucco home, not a new build. The original windows on many of these houses are past their service life, and the surrounding stucco has usually taken years of thermal cycling. Every job also has to clear two reviews: Miami-Dade County permitting and the Country Walk HOA’s architectural review. That HOA step adds two to four weeks most neighboring areas don’t impose, so we pull the county permit and submit the drawings for review in parallel, not one after the other.
The housing stock also matters. Uniform barrel-tile and shingle roofs, similar elevations, and a tight subdivision layout mean the same window shapes and proportions repeat street to street, which helps with matching. South Florida’s heat, intense UV, and hurricane season are the reason most of our Country Walk clients choose impact-rated glass and secondary water barrier details under Florida Building Code. Afternoon thunderstorms and heavy summer rain make the flashing and sealant details around an arched opening the part of the job we watch closest. If the windows are part of a full Windows & Doors in Country Walk project, we scope it all together.
Serving Country Walk, FL – Our Local Coverage Area
We serve Country Walk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Custom & Geometric Windows in Country Walk
Plan on six to ten weeks from contract to final inspection, with two to four days of on-site installation once the units arrive. The long pole is fabrication of radius and angled windows, plus the Country Walk HOA architectural review. Call (844) 761-9356 for a schedule based on your specific openings.
Yes. Window replacement and any change to a structural opening require a Miami-Dade County permit, and rounded or enlarged openings also trigger the Country Walk HOA architectural review. We pull the permit and coordinate the inspection as part of the job. Call (844) 761-9356 to get the paperwork started.
In most cases yes, if we’re replacing within the existing rough opening and matching the current dimensions. Enlarging an opening or cutting a new one into a block wall requires a structural header and a permit amendment. Call (844) 761-9356 and we’ll tell you which category your project falls into after a site visit.
A single shaped or custom unit typically runs $1,200 to $3,500 installed, depending on size, frame material, and impact glass. A full project of four to eight openings lands between $6,500 and $19,000. Call (844) 761-9356 for a written line-item quote – estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise, and the manufacturer’s product warranty covers the frame and glass separately. If something isn’t right in the first two years, we make it right. Call (844) 761-9356 to review the warranty terms on your specific units.
Get a Written Estimate for Custom & Geometric Windows in Country Walk
We’ll come out, measure every opening, and give you a line-item estimate with the unit specs, glass package, permit, and lead time spelled out. No pressure and no surprises. Our windows & doors service covers the full scope, and we’re glad to walk you through the Windows & Doors options alongside it. Call (844) 761-9356 to schedule your free estimate in Country Walk and the surrounding Country Walk area.
Written by the team at Groundwork Construction Co. of The Hammocks.