Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Sunset, FL: What the Job Really Involves
A paver driveway in Sunset typically runs $7,000 – $18,000 and takes three to five working days from demo to the final sweep of sand into the joints. The work is excavation and base build first, compacted limerock and bedding sand second, paver laying and edge restraint third, and that base is what decides whether the driveway holds its shape through ten Miami-Dade rainy seasons or settles into a wavy mess in two. Call (844) 761-9356 and we’ll walk your block, look at the existing slab or shell, and give you a written, line-item number for your Paver Driveways before anyone touches a shovel.
Day by Day: How We Build Paver Driveways in Sunset
Every paver driveway follows the same sequence, and the sequence is the whole job. Here’s what actually happens on your property, in order, so you know when you’ll need to be home and when you can leave the crew alone.
Stage 1: Site check and layout (day one, half a day)
We measure the drive, check the slope away from the house, and mark drainage direction. On a dense Sunset lot this is where you decide the paver pattern and the edge detail, because the pattern changes the cut count and the order quantity. You also confirm where your car sits during the build, since most Sunset homes only have one usable parking spot and we plan around that from the start.
Stage 2: Demo and removal (day one, full day)
Existing concrete, asphalt, or old pavers come out, and we haul it off. On mid-century Sunset properties this is also when we find out what’s underneath – old root systems, buried sprinkler lines, sometimes a shallow utility run. If we hit a surprise, we stop and show you before quoting the fix, because nobody likes a change order they didn’t see coming.
Stage 3: Sub-base preparation (day two, full day)
We excavate to depth, lay and compact limerock base in lifts, and check grade with a laser level. This stage is the one that gets rushed by cheap crews and it’s the one that matters most. A paver driveway in Sunset sees heavy summer rain, and if water can’t sheet off the surface and away from the house, you’ll be calling someone else in eighteen months.
Stage 4: Paver installation (days three and four)
Bedding sand goes down, pavers go in, cuts happen at the edges, and the edge restraint gets set in concrete. You’ll choose the paver at the order stage – color, size, and laying pattern – and this is when it takes shape.
Stage 5: Joint sand and final clean (day five, morning)
Polymeric sand gets swept into the joints, compacted, and misted to set. We walk the driveway with you, check every edge, and hand over the care sheet. That completes a typical residential job in about five working days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Pavers, Edges, and Joint Sand: The Choices You’ll Make
The paver itself is the visible decision, but three choices decide how the driveway ages. Here’s what actually lands in front of a Sunset homeowner:
- Concrete pavers (interlocking) – the workhorse for most Sunset driveways. Durable, repairable, and wind-rated when set on a proper base. The mid range in cost and the most forgiving if a single paver cracks.
- Clay brick pavers – warmer look, holds color, ages well. Costs more and needs a careful base, since clay is less forgiving on flat, low-slope ground. Suits homes where the driveway is visible from the street and you want the curb appeal.
- Permeable pavers with open joints – a smart fit for Sunset’s flat terrain and heavy summer rain, since water drains through instead of sheeting to the street. Higher material cost, but it solves localized flooding at the source.
- Edge restraint type – concrete curb versus spiked plastic. Concrete is stronger and holds on sandy soil; plastic is faster to install. Both work if the base is right, but the concrete edge is what keeps the driveway from spreading at the corners.
- Joint sand – polymeric sand locks the joints and resists weeds; regular sand is cheaper but needs topping up. On a Sunset driveway, polymeric is worth the upcharge.
We use Belgard pavers on most of our driveways, and we’ll bring real samples to the estimate so you’re choosing a color in daylight, not a catalog photo.
What Paver Driveways Cost in Sunset, FL?
A paver driveway in Sunset runs $7,000 – $18,000 for a typical residential drive. Where your job lands inside that range comes down to a handful of variables you can actually measure before we quote.
- Size and shape – a straight 400-square-foot drive sits at the low end; a wide drive with curves, a turnaround, or a carport apron pushes toward the top.
- What’s under the existing surface – removing and hauling 4-inch concrete costs more than pulling up worn pavers. Old root systems or failing base mean extra excavation.
- Base depth and drainage – flat Sunset lots sometimes need a deeper limerock base or a drainage channel to move water off the drive, which adds material and labor.
- Paver grade and pattern – a simple running bond in one color costs less than a herringbone cut with a border and a two-tone mix, because of the extra cutting and layout.
- Permit scope – a straight like-for-like paver replacement is often a smaller permit than new construction that changes the footprint or drainage.
A written estimate covers removal, haul-away, base, bedding sand, pavers, edge restraint, polymeric sand, and cleanup. What it may not cover: hidden utility relocation, structural repair to a driveway apron that ties into a county sidewalk, or HOA color approval paperwork. We itemize the line items so the number you see is the number you pay, backed by the 730-Day Done Right Promise if anything we installed fails.
See the difference
Before
After
Before
After
Before
AfterWhat Mid-Century Sunset Properties Mean for a Paver Driveway
Sunset is a dense, unincorporated Miami-Dade community, and that single fact shapes how this job runs. Permits and inspections go through Miami-Dade County’s Unincorporated Municipal Services (UMS), not a local city hall, so the paperwork and inspection scheduling line is different here – and it’s the step that catches out-of-area builders off guard. Because much of the housing stock dates to the 1950s – 1970s, well before the 1994 Florida Building Code, the driveway apron often ties into an older curb or sidewalk that needs a code upgrade, not just a fresh surface. On top of that, the area’s flat terrain and heavy summer rain make drainage a genuine design question: a paver drive with nowhere for water to go will undermine its own base. When the driveway is part of a full Driveway & Pavers in Sunset scope, we plan the drainage for the whole property. For homeowners planning an ADU Design & Permitting in Sunset alongside it, we coordinate the two jobs so the new drive serves the new structure. And if your project also involves a Garage Conversion ADU in Sunset, we route the drive around the new access. Our Sunset service covers this work block by block, and homeowners exploring our broader Driveway & Pavers service often find the paver driveway is the piece that sets off the whole exterior.
Serving Sunset, FL – Our Local Coverage Area
We serve Sunset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQ: Paver Driveways in Sunset
Most paver driveways in Sunset take three to five working days from demo to final sand. Small straight drives can finish in three; a wide drive with curves and a fresh base often runs five, plus permit turnaround time with Miami-Dade County UMS before we start.
Yes, most paver driveways in Sunset require a permit through Miami-Dade County’s UMS, especially any job that changes the surface, the drainage, or the footprint. We pull the permit and schedule the inspections as part of the job, so the approval stays with the county file and not on your to-do list.
Usually yes – a paver driveway sits above the existing ground at shallow depth, so most jobs don’t disturb plumbing or structure. We check utility runs and grade before we excavate, and if a buried line does turn up, we stop and show you the fix before continuing.
Paver driveways in Sunset run $7,000 – $18,000, driven by square footage, base condition, paver grade, and permit scope. Call (844) 761-9356 for an exact quote, and we’ll bring samples and itemize everything – estimates are free.
Every paver driveway we install in Sunset is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. The base, the edge restraint, and the joint sand are all part of that coverage, which is one of the longest workmanship guarantees in residential construction.
Get a Free Paver Driveway Estimate in Sunset
If your Sunset driveway is cracked, settled, or just past its years, we’ll come out and price it properly. Call (844) 761-9356 for a free, no-obligation on-site estimate. A live person answers around the clock, we measure and check your base on site, and you get a written, itemized number along with a look at real Belgard samples. Upfront pricing, no surprises, and the 730-Day Done Right Promise behind the work.
Written by the team at Groundwork Construction Co.