Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in The Crossings, FL: Cost, Process, and HOA Approval
Aluminum fence installation in The Crossings, FL runs $4,000 – $10,000, typically $3,500 – $9,000 for the fence itself, and most residential runs are finished in 2 – 4 working days once the materials land. The slow part isn’t the building, it’s the association: in The Crossings, FL almost every exterior change needs architectural review before a single post goes in, so plan on 2 – 4 weeks of lead time. Call (844) 761-9356 for a free on-site estimate.
How we run an aluminum fence job in The Crossings, stage by stage
Most homeowners assume a fence crew shows up and starts digging. On aluminum work inside an HOA tract, the sequence matters more than the speed, so here’s what actually happens and when.
Stage 1: Site visit and the ARB packet (days 1 – 3)
We walk the property line, measure the run, find the property pins or note where a survey is needed, and photograph the house so the fence style reads correctly against the stucco and roof line. Then we put together what your architectural review board will want: manufacturer spec sheet, powder-coat color chip, post spacing, height, and a plot plan showing setbacks. This is the stage that saves you a violation notice later, because a rejected application means resubmitting and waiting again.
Stage 2: Association approval and county permitting (weeks 1 – 3)
You submit to the ARB; we supply anything the board asks for. On most aluminum runs in The Crossings we’re under the height threshold that avoids a building permit, but pools, screen enclosures, and gates tied into a safety barrier are a different story. We confirm the permit requirement in writing before you sign anything, because the county and the association aren’t always looking for the same paperwork.
Stage 3: Utility locate and layout (day 1 on site)
Before a spade touches ground we call in the 811 locate. It takes a couple of days and it’s non-negotiable. Then we string the line and mark post centers. If your property pins are missing, this is the moment a survey matters; we won’t guess at a line and hand you a neighbor dispute in year two.
Stage 4: Set posts, hang panels (days 1 – 3)
Posts get set in concrete footings and left to cure. Panels, pickets, and rails go up after, then gates hang and get adjusted for swing and latch. On a typical 150-foot residential run in The Crossings, that’s two to three days of actual installation. Rackable panels are what let us follow the grade change across a sloped Kendall lot without leaving a stair-step gap.
Stage 5: Walkthrough and punch list (final day)
We walk the line with you, check every latch, look for any post out of plumb, and touch up the finish. You get the warranty documentation at the same visit. The 730-Day Done Right Promise covers workmanship for two full years: if a post settles or a gate sags out of adjustment because of how we set it, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The aluminum fence options you’ll actually choose between
- Residential-grade vs. heavy commercial extrusion: Standard residential aluminum pickets are thinner walled and cost less. Heavier extruded profiles resist bending and hold up better if you have kids, dogs, or a lawn crew that trims too close. For a typical The Crossings backyard, residential grade is usually right; the heavier stock earns its money on a long street-facing run.
- Powder-coat color: Black is the default and the safest bet for ARB approval. Bronze and dark green are common alternates. Here’s the honest trade-off: a custom color can push you to a longer lead time and may not match a neighbor’s fence, and some associations in this ZIP only allow black or bronze. Confirm before ordering.
- Picket spacing and height: 4-foot and 5-foot runs are the residential standard; 6-foot is common for pool barriers and privacy screening. Tighter spacing raises the price per linear foot and blocks more sightline. If the goal is a code-compliant pool safety barrier, spacing and self-closing, self-latching gates are the variables that matter, not the color.
- Rackable vs. fixed panels: Rackable panels pivot to follow slope. On flat lots it doesn’t matter; on a lot with grade change it’s the difference between a clean fence and one with wedge-shaped gaps at the bottom.
- Gate hardware: Standard hinges, self-closing hinges, and keyed latches. Self-closing and self-latching hardware is what a pool inspection looks for, so decide that at the quote stage, not after the fence is standing.
- Finishes worth naming: The powder-coat system is what fights South Florida humidity and salt haze. A factory finish on aluminum outlasts any field-applied paint, which is why we don’t offer painted steel as an alternative on this page.
What aluminum fence costs in The Crossings, FL
Expect $4,000 – $10,000 for a residential aluminum fence in The Crossings, with most jobs landing in the $3,500 – $9,000 range for the fence itself. Five things move that number:
- Linear feet and gate count: The single biggest driver. A 100-foot run with one gate and a 200-foot run with two gates are different projects, not the same project twice.
- Height and picket spacing: A 6-foot pool barrier with tight spacing costs more per foot than a 4-foot decorative run.
- Grade and terrain: Rackable panels cost more than fixed, and a lot with significant slope or roots in the way means more footing work.
- Removal of the old fence: Tearing out and hauling an existing wood or chain-link fence is added labor and disposal. It’s itemized, not folded into a lump sum.
- ARB and permitting scope: A simple side-yard run that doesn’t need a building permit is one thing; a pool enclosure or a structural gate is another.
Your written estimate lists posts, panels, gates, hardware, concrete, haul-away, and permit fees as separate lines. What’s usually not included unless we say so: a property survey, and any landscaping repair beyond basic backfill. Upfront pricing, no surprises. Call (844) 761-9356 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat The Crossings homes specifically do to this job
The Crossings is a master-planned Kendall subdivision built almost entirely in the late 1980s and 1990s inside ZIP 33186, so nearly every job here is renovation of an original Mediterranean-style stucco CBS home rather than new construction. That changes aluminum fence work in two concrete ways. First, because the community is fully built out and association-governed, exterior changes need architectural review on top of any Miami-Dade County permitting, and the review is where jobs stall. Second, the housing stock itself sets the constraints: original tile roofs and attached garages mean the fence line has to work around existing stucco walls, shutters, and established landscaping that’s been growing for 30 years.
The climate does the rest. Subtropical heat, heavy summer rain, and hurricane exposure mean we schedule exterior installation around the June-to-November storm window, and we set footings deep enough that saturated summer ground doesn’t heave a post. The failure mode we see most in The Crossings isn’t the aluminum itself, it’s gates that sag because the original footing was too shallow. Fixing that starts at the quote.
Serving The Crossings, FL – Our Local Coverage Area
We serve The Crossings and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about aluminum fence in The Crossings
The build is 2 – 4 working days for a typical residential run, but the full timeline from contract to finished fence is usually 2 – 4 weeks because architectural review and the 811 utility locate come first. Call (844) 761-9356 and we’ll map your actual timeline before you commit.
You almost always need architectural review board approval, because The Crossings is an association-governed community. A building permit depends on the scope: a standard side-yard run often doesn’t need one, while pool barriers and structural gates usually do. We confirm both requirements in writing and supply the ARB packet. Call (844) 761-9356 to start the review.
No, not on a fixed-scope aluminum fence quote. The number you see is the number you pay, and any change comes from a written change order you approve first. If we hit something we didn’t anticipate, we stop and talk to you, we don’t bill it silently. Call (844) 761-9356 for a line-item estimate.
In most cases yes, and it’s often the fastest path through architectural review. We photograph the adjacent fences, identify the finish and spacing, and match it where the association allows. If the board requires a specific style, we build to that spec. Call (844) 761-9356 and we’ll check the community standard with you.
Workmanship is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right, for two years. The powder-coat finish carries its own manufacturer warranty, which we hand you in writing. Call (844) 761-9356 to schedule a free estimate; a live person answers around the clock.
Get a free aluminum fence estimate in The Crossings
We’ll come out, measure the run, photograph the property line, and hand you a written line-item quote with the ARB paperwork spelled out, all at no charge. Call (844) 761-9356 and we’ll book a time that works. If your aluminum fence is part of a full Fence Installation in The Crossings project, we scope both at the same visit. Need the broader picture first? See our Fence Installation service, or check everything we cover in The Crossings. Homeowners often pair this with Driveway Repair & Replacement in The Crossings or Patios, Walkways & Pool Decks in The Crossings.
Written by the team at Groundwork Construction Co.