Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Sunset, FL: What They Cost and How They’re Built
Custom & Geometric Windows in Sunset, FL typically run $8,000 to $25,000 for a whole-house package of arched, angled, round or trapezoid units, and single feature windows land closer to $1,800 to $4,500 each installed. Most jobs take three to six weeks from template to final inspection, with rough opening work happening in the first week. Call (844) 761-9356 to schedule a free on-site estimate. We’ll measure every opening and give you a written line-item quote before anything is ordered.
How a Custom & Geometric Window Project Actually Runs, Stage by Stage
Geometric windows aren’t stock units. Round-tops, half-rounds, eyebrows, trapezoids, angled corner glazing and true arches are all built to a template of the actual opening, so the schedule has hard stops you can’t compress. Here’s the real sequence.
Stage 1: Field measure and template (day 1, about 2 hours)
We measure every rough opening, check plumb and level on the wall, and look at what’s behind the drywall or stucco: header size, framing condition, any old termite or water damage. On 1950s to 1970s Sunset homes we sometimes find undersized headers behind a wide opening that was never built for anything but a fixed single pane. If the structure won’t carry a larger geometric unit, that decision gets made now, not after the order. You decide radius style, grid pattern and glass package at this visit.
Stage 2: Wind-load engineering and permit submittal (days 2 to 10)
Every exterior opening in Miami-Dade has to meet the wind-load requirements of the Florida Building Code, and geometric shapes complicate that. A half-round doesn’t have the same pressure rating as a rectangle of the same width, and the engineer has to specify the anchoring and reinforcement for each shape. We submit the product approval numbers and engineering to Miami-Dade County’s Unincorporated Municipal Services, since Sunset has no city hall of its own. Approval usually takes one to three weeks, and it’s the step out-of-area builders underestimate.
Stage 3: Rough opening prep and framing (days 10 to 14)
Once the permit is issued, we cut the openings, adjust or add headers, install king and jack studs, and check the wall for flatness across the full span. This is also when we open the wall to look for hidden issues: old aluminum window flanges that were caulked instead of flashed, moisture staining at the sill, or a carport beam that needs strapping. You’ll see photos of anything we find before we price the fix.
Stage 4: Fabrication and install (weeks 3 to 5)
Custom shapes are built to order, so this is the long lead time: three to six weeks depending on the manufacturer and glass package. Install itself is usually one to two days for a package of units. We set, shim, anchor, insulate the gap and flash the perimeter, then seal with a rated sealant. The team arrives background-checked and in uniform, and jobs like this are commonly completed in a single visit once the units land.
Stage 5: Inspection and punch (final day, plus the county visit)
The county inspects after installation. We schedule it, meet the inspector on site, and walk the job with you the same day. Anything on your punch list gets handled before we close out, and all of it sits under our 730-Day Done Right Promise. If something’s not right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Geometric Window Job
Almost every decision on this job comes down to shape, material and glass. Here’s how the choices actually differ.
- Frame material: wood vs. aluminum vs. vinyl vs. clad. Wood gives you the widest shape range and the cleanest interior trim, but in South Florida’s humidity it needs real maintenance. Aluminum is dimensionally stable in heat and handles large spans well, though it conducts heat. Clad wood (aluminum outside, wood inside) is the common premium choice for arched and radius units and is where Andersen and Marvin sit. Vinyl is the value option and works fine for standard curves but limits you on very large or very tight radii.
- Shape. Half-rounds, eyebrows and arches are the most common. Trapezoids, angled corner units and full circles cost more because of glass waste and template work. Two smaller fixed geometric units flanking a rectangle often cost less than one oversize arch and look sharper from the street.
- Glass package. This is where Sunset’s sun and storm exposure decide the spec. Impact-rated laminated glass is standard for exterior openings. Low-E and a higher solar heat gain rating (SHGC) matter here because of the west-facing heat load, and a good window package noticeably cuts afternoon cooling cost. You’ll pay more for the coating, and it pays back in summer electric bills.
- Grid and trim detail. Simulated divided lites, true divided lites, and interior casing profiles change the price meaningfully. Simple flat casing is the low end; deep profile trim and custom radius casings push the number up.
- Fixed vs. operable. Builders mostly specify geometric windows as fixed units, because operable radius windows cost more and seal less well. If you need ventilation in that location, the honest answer is usually a nearby rectangular operable unit rather than a custom operable arch.
- Hardware and finishes. Windows aren’t the same as a kitchen, but the same rule holds: finishes and hardware grades move the number. Matte black and bronze hardware usually specs the same as white; specialty finishes cost more.
What Custom & Geometric Windows Cost in Sunset, FL
A single custom geometric feature window installs for roughly $1,800 to $4,500. A package of several arched or angled units across a house runs $8,000 to $25,000, which puts it in the same bracket as our broader Windows & Doors in Sunset work but with more engineering up front.
Five things push a job toward the low or high end:
- Number and complexity of openings. One half-round is a small job. Six trapezoids on a two-story front elevation is not.
- Wall condition behind the window. Undersized headers, old water damage or failing stucco mean framing and repair work alongside the install. On a Sunset house from the 1960s, this alone can add 15 to 30 percent.
- Size and span. Bigger units need heavier engineering and more glass. Above a certain width, steel or reinforced framing enters the picture.
- Glass and material grade. Clad wood and premium impact glass cost more than vinyl; Low-E coatings and specialty finishes add to the line.
- Permit scope. New openings, structural changes or a package that touches the roofline require more county review than a like-for-like swap. That review takes time and money.
A written estimate from us lists each unit, its engineering and product approval reference, the install labor, flashing and sealant, permit fees and any framing repair allowance. It does not include interior drywall patching beyond the immediate opening, painting, or blinds and screens you buy on your own. Upfront pricing means the number you see is the number you pay, and projects over $10,000 get $1,000 off with 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhat Sunset Homes Specifically Do to This Job
The first thing that catches people out in Sunset is the permit path. Because this is an unincorporated Miami-Dade community, permits and inspections go through the county’s Unincorporated Municipal Services office, not a local building department. Out-of-area builders pull the wrong paperwork and lose two to three weeks before they even order glass. We know the process and schedule inspections accordingly.
The second factor is age. Most of the housing stock here dates from the 1950s to the 1970s, well before the 1994 Florida Building Code, and original single-pane windows sit in walls that were never engineered for wind-load compliance. Adding a geometric unit to a house like that usually means a code upgrade to the opening and sometimes the wall around it. We see the same failure patterns repeatedly: sill rot under old aluminum frames, cracked stucco at the corners of arches, and anchors that pulled loose over decades of heat cycling. Blocks around the 33173 ZIP have plenty of low-pitch and flat roofs, so the wall-to-roof connection matters when a big window package changes the load.
Then there’s the climate. Sunset’s hurricane season peaks from August to October, and wind-driven rain is the real enemy of a poorly flashed arched window. Impact-rated glazing and correct perimeter flashing are not upgrades here; they’re the baseline. Heavy summer rain, combined with low, flat terrain, also means water needs a clear path away from the wall. Homeowners often pair a window project with Concrete Driveways & Concrete Work in Sunset or Asphalt Driveways & Resurfacing in Sunset to reshape drainage away from the house at the same time.
We cover Sunset and neighboring areas including Westwood Lakes, Kendall, Richmond Heights and Kendale Lakes. If the window work is part of a larger envelope upgrade, our Windows & Doors service page covers the rest of the scope.
Serving Sunset, FL – Our Local Coverage Area
We serve Sunset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Sunset
Plan on three to six weeks from signed contract to final inspection. The county permit approval and fabrication of the custom shapes account for most of that time; the install itself is usually one to two days. Call (844) 761-9356 for a timeline based on your specific openings.
Yes. Because Sunset is unincorporated, the permit goes through Miami-Dade County’s Unincorporated Municipal Services office, not a city building department, and any exterior opening change requires approval with wind-load engineering. We pull the permit and meet the inspector for you. Call us to start the paperwork.
Often, yes. Most of our customers swap an existing window for a larger or shaped unit within the same wall area, which avoids relocating utilities and limits structural work. If the opening needs a bigger header or a new wall connection, we tell you at the field measure before you commit. Call (844) 761-9356 to book the measure.
Feature units run $1,800 to $4,500 installed, and a whole-house package of custom shapes is $8,000 to $25,000, with age-related framing repairs and premium glass pushing toward the high end. You’ll get a written line-item quote before ordering. Call (844) 761-9356 for an exact number.
Every project we do is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space, plus the manufacturer’s warranty on the units themselves. If something isn’t right, we make it right. Call (844) 761-9356 with any warranty question.
Get a Free Estimate on Custom & Geometric Windows in Sunset
If you’re planning custom & geometric windows, the first step is a field measure and a written bid. Call (844) 761-9356 and a live person answers, day or night. We’ll set a time to walk your openings, talk through shapes, glass and wind-load requirements, and hand you a line-item estimate with no surprises. Free, no pressure, no sales script. When you’re ready, we’re here.
Written by the team at Groundwork Construction Co.