A Groundwork company - serving The Hammocks, FL
Custom & Geometric Windows in Kendall, FL | Groundwork Construction Co. of The Hammocks

Custom & Geometric Windows in Kendall - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Custom & Geometric Windows in Kendall, FL: What They Cost and How They’re Built

Custom & geometric windows in Kendall, FL typically run $800 to $2,500 per opening for a shaped unit and $4,500 to $15,000 for a whole-home package that mixes arches, circles, and trapezoids with standard rectangles. Most Kendall jobs are measured in week one, fabricated in weeks two through five, and set and trimmed in a single day once the units land. Call (844) 761-9356 for a free on-site estimate. We give you a written, line-item price before anything is ordered.

Call (844) 761-9356

How We Build a Geometric Window Package, Stage by Stage

The sequence for Custom & Geometric Windows matters more than the units themselves, because a mismeasured arch is a re-fabricated arch and a five-week delay. Here’s how a job actually runs.

Stage 1: Field measure and template (about 2 hours)

Every shaped opening gets a physical template, not just a tape measure. Arches are traced, radii are recorded, and we check rough-opening square against the existing CBS block. You decide here which openings get the treatment and which stay rectangular, because mixing shapes is what makes a facade look deliberate instead of busy.

Stage 2: Product selection and approval (3 to 7 days)

We walk you through glazing options, frame material, grille patterns, and finish. You sign off on a shop drawing. This is the step where homeowners hold up a custom & geometric windows project the longest, so we push for decisions early. Anderson and Marvin are the two lines we usually bring to this conversation.

Stage 3: Permit and product approval (2 to 4 weeks)

Miami-Dade County requires a permit for window replacement, and every unit needs a product approval (NOA) on file that matches the opening and the design pressure. We submit the drawings, wait on the county, and coordinate the inspection schedule. You don’t chase this paperwork; we do.

Stage 4: Fabrication (3 to 6 weeks)

Shaped units are made to order, so this is the longest stretch and the one we can’t compress. Standard rectangular units arrive in half the time. We give you a realistic install window here rather than a guess, because a bad date is worse than an honest one.

Stage 5: Demo, set, seal, and trim (1 to 3 days)

Old units come out, openings get flashed and sealed, new units are set and shimmed, and the interior trim and exterior stucco patch go back. You’ll want to be present for the final walk so we can operate every sash together and confirm the seal and finish. Most jobs finish in a single day once we start.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

  • Frame material: Vinyl is the value pick, holds up well in Kendall’s humidity, and costs less. Aluminum is stronger for large spans and wide arches. Wood gives you a warmer interior look, but it needs real maintenance in this climate.
  • Glazing: Standard insulated glass vs. impact-rated laminated glass. Given the HVHZ code environment here, most Kendall homeowners go impact-rated, which also handles the hurricane question upfront.
  • Shape complexity: A single arch over a front door is straightforward. A half-round, an eyebrow, an oval, or a trapezoid in the same facade raises fabrication cost and the risk of a measurement error.
  • Grille pattern: A true divided-light or simulated divided-light in a shaped unit adds detail and cost. Simulated grilles between the glass panes are the practical choice for arched windows.
  • Finish: Factory-baked color holds up far better than field-painted frames in salt air. Pick the finish from the factory palette and you avoid repainting in three years.
  • Trim and surround: Stucco return, wood casing, or a shaped surround. The surround is what makes a geometric window read as intentional.

What Custom & Geometric Windows Cost in Kendall, FL

Expect $800 to $2,500 per shaped opening for the unit itself, and $4,500 to $15,000 for a typical package of six to ten windows mixing geometric and standard shapes. Those are the market-calibrated ranges we quote across Kendall, FL. In a full package with impact glazing and a whole-home scope, see Windows & Doors in Kendall for the broader project.

The five variables that push a job from the low end to the high end:

  • Number and shape of openings: Each unit has its own fabrication and permit line item. Odd shapes add cost.
  • Glazing and code compliance: Impact-rated laminated glass and the required product approval cost more than standard insulated glass.
  • Frame material and finish: Aluminum and wood run higher than vinyl, and a factory-baked color adds a line.
  • Existing condition: Rotten framing, cracked stucco, or out-of-square rough openings mean repair before install.
  • Access and height: Second-story work or tight side-yard access adds labor and equipment.

A written estimate from us lists the units, the glazing spec, the permit fee, the labor, and the trim and seal by line. It does not include unforeseeable structural repair; if we open a wall and find rot, we quote it before we proceed, never after.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Kendall Homes Do to This Job

Kendall is a fully developed, unincorporated Miami-Dade community west of the Turnpike, which means nearly every Custom & Geometric Windows project here is a retrofit into an already-improved lot rather than a new build. The housing stock is mostly 1970s-to-1990s CBS concrete block, single-family, with barrel-tile or shingle roofs, plus a ring of newer townhomes and mid-rises along Kendall Drive. Most of the homes we work on have original or first-replacement windows, and the openings aren’t always square after forty years of stucco movement and Florida heat. On the coastal air and hurricane code side, every unit needs the county’s product approval for the design pressure of the opening, and the paperwork question comes before the price question for most Kendall homeowners. After a tropical storm or a summer microburst, we get calls about soffit and fascia damage around the same time word spreads in the tract neighborhoods, and that’s exactly when people start asking whether the contractor pulls the Miami-Dade permit and carries the HVHZ approvals. We do both, and we schedule the inspection as part of the job.

Serving Kendall, FL – Our Local Coverage Area

We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Custom & Geometric Windows in Kendall

Get a Free Estimate on Custom & Geometric Windows in Kendall

Call (844) 761-9356 to schedule a free on-site estimate for Custom & Geometric Windows in Kendall, FL. We’ll measure the openings, talk through shapes and glazing, and hand you a written line-item price. If you’re planning a broader upgrade, our Windows & Doors service and the Kendall service area give you the full picture. Homeowners often pair this with Concrete Driveways & Concrete Work in Kendall or Asphalt Driveways & Resurfacing in Kendall. Calls are answered by a live person, 24/7.

Written by the team at Groundwork Construction Co.

Why Kendall Chooses Groundwork Construction Co. of The Hammocks

We set the standard for custom & geometric windows in Kendall.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Kendall

Getting your custom & geometric windows project started is simple.

1

Call or Request a Free Estimate

Tell us about your custom & geometric windows project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local custom & geometric windows pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Kendall Customers Say

Trusted by homeowners across Kendall and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ready for Custom & Geometric Windows in Kendall?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Kendall.

(844) 761-9356

Request a Free Estimate in Kendall

Tell us about your custom & geometric windows needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch