Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Kendall: What It Takes and What It Costs
Concrete driveways and concrete work in Kendall typically run $4,500 – $12,000 for a standard residential driveway replacement, with most jobs poured in 2 – 3 working days plus a 7-day cure before you park on it. The real drivers are slab size, whether the old drive has to come out, and how much Miami-Dade permitting the finished work touches. Call (844) 761-9356 for a free on-site measurement and a written line-item number before anything gets torn up.
How the Work Actually Moves, Day by Day
A driveway is the rare construction job where the schedule is honest. Here’s the sequence we run in Kendall, and where you make decisions.
Stage 1: Site visit and layout (day 1)
We measure the slab, check drainage fall toward the swale, and note what has to be protected – irrigation runs, pool equipment pads, mailbox anchors, the county sidewalk apron. You decide the pour size, finish, and expansion-joint layout. If the driveway ties into the garage slab, that joint gets set here so water doesn’t pool against the door.
Stage 2: Demo and haul-off (days 1 – 2)
Existing concrete comes out with a breaker and a skid steer, then goes to a transfer station. On a typical 400 – 600 sq ft Kendall drive, demo and haul-off is one long day. You don’t have to decide anything here – but tell us about anything buried in the yard (sprinkler valves, low-voltage landscape lighting) before the first bucket drops.
Stage 3: Base prep and formwork (day 2)
This is where driveways fail later. We cut out soft or unsettled soil, compact the subgrade, and set forms to the agreed grade. On lots in this part of Miami-Dade, the base matters more than the mix: our native soil is limerock-heavy in spots and can hold water in low corners after a summer rain, so we check drainage before the pour, not after. You decide the finish (broom, exposed aggregate, saw-cut pattern) at form-setting so the concrete crew knows what’s coming.
Stage 4: Pour and finish (day 3)
Concrete arrives by truck, gets placed, screeded, floated, and finished. Broom finish for grip is standard on Florida driveways; saw-cut control joints go in a few hours later to force cracking where you want it. We keep the crew on site through finishing and cover the slab against the afternoon downpour, which in Kendall can appear without warning between June and September.
Stage 5: Cure and walkthrough (7 – 10 days)
The slab cures, usually kept damp or sprayed for a few days, and we walk you through the finished work: joint layout, drainage, seal recommendations. You park on it after roughly seven days, heavier vehicles later. Any question about the pour gets answered in writing before we close the ticket.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape the Pour
Concrete isn’t one product. What you pick here changes the price, the maintenance, and how it looks in ten years.
- Standard broom-finish concrete (about 4,500 psi): the workhorse for Kendall driveways. Grip is good, maintenance is close to zero, and it takes a sealant well. It’s the default for good reason.
- Exposed aggregate: the top layer of cement gets washed away to reveal the stone. More slip resistance, more visual texture, and it hides tire tracks. Costs more than broom and takes an extra finishing step.
- Broom with a saw-cut pattern: scoring the slab in a grid once it’s hard. Reads like a paver layout at a fraction of the material cost. Not structural – purely a look.
- Rebar vs. mesh reinforcement: we recommend rebar for driveways carrying regular vehicle loads. Mesh is cheaper and fine for light foot-traffic areas.
- Slab thickness: 4 inches is the minimum; 5 – 6 inches holds up noticeably better on a drive where you’ll park an SUV or a work truck.
- Sealer: a penetrating or film-forming sealer goes on after full cure. It slows surface scaling, resists oil stains, and helps in the UV-heavy South Florida sun. We quote it separately so you see the real cost.
This is the concrete-only scope. If you’re weighing a paver surface, or looking at the driveway as part of a broader front-yard rebuild, our Driveway & Pavers in Kendall page covers those finishes and the wider layout decisions. If you’re also thinking about turning the garage into living space, homeowners often pair a driveway refresh with a Garage Conversion ADU in Kendall so the new approach matches the new use.
What Concrete Driveways & Concrete Work Costs in Kendall, FL
For a standard residential replacement, expect $4,500 – $12,000. A full teardown and replacement where the old slab has to come out once and correctly runs $5,000 – $14,000. Below is what moves a job from one end of that range to the other.
- Slab size and thickness: a 400 sq ft single-car drive sits near the bottom; a 1,000 sq ft circular or double-width drive with a 6-inch pour lands at the top. Every extra inch of thickness adds concrete, labor, and cure time.
- Existing condition: cracked, heaved, or root-damaged concrete means more demo, more haul-off, and sometimes subgrade repair before any pour happens.
- Site access and drainage: a tight lot where a truck can’t reach the pour point adds wheelbarrow labor. Slope corrections or a new swale cut add grading time.
- Finish and reinforcement: broom is the baseline; exposed aggregate, stamped borders, or a saw-cut grid push upward. Rebar over mesh adds material cost but earns its keep.
- Permitting and inspections: if the work touches the right-of-way or a sidewalk apron, the county gets involved and the inspection schedule adds days and fees.
What a written estimate includes: demo, haul-off, base prep, forms, reinforcement, concrete placement and finish, control joints, cleanup, and permit fees where required. What it typically doesn’t: landscaping repair around the slab, irrigation rerouting, tree-root grinding, and sealing, which is quoted as its own line. You’ll see an itemized number with no surprises spliced in later – the number you sign is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Kendall Lots Change the Math
Kendall is a fully built-out corner of unincorporated Miami-Dade west of the Turnpike, which means almost no clean-lot work – nearly every driveway job here is a rebuild on an already-improved lot. Most homes in the 33176 ZIP are 1970s-to-1990s concrete block (CBS) single-family houses, and their original driveways are now 30 to 50 years old. That’s the sweet spot where they crack, spall, and sink at the garage lip. The afternoon downpours that roll through between June and September expose drainage problems fast, and a slab poured without proper fall will pond water against the garage door within one season. If your drive ties into a larger front-yard rebuild, our Driveway & Pavers service lays out how concrete fits with the rest of the hardscape. And if your project also involves a new structure, a New Detached ADU in Kendall is often planned alongside driveway and apron work so both get poured to the same finish. We work all over Kendall – from the tract streets off Kendall Drive to the newer townhome rows along the east side – and pull the Miami-Dade County permits the work requires.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Kendall
Most Kendall concrete driveway jobs finish in 2 – 3 working days, with the pour on the final day and roughly 7 days of cure before you drive on it. Demo, base prep, and forms take the first day or two; weather delays during the rainy season can push the pour back a day, so we build in a buffer on every schedule.
It depends on scope. A straight driveway replacement on private property often doesn’t need a separate permit, but work that touches the sidewalk apron, right-of-way, or the public swale does, and Miami-Dade County wants the paperwork in order. We tell you at the estimate exactly what permitting applies and pull it before the first truck arrives – we don’t start a pour and sort out the county afterward.
Sometimes yes. If the failure is isolated – one cracked panel, a sunk apron near the garage, a lifted section from a tree root – a partial replacement or concrete repair can be a real cost saver, often in the low hundreds to low thousands rather than a full replacement number. We assess the whole slab on-site: if the base under the healthy sections is sound, a targeted fix makes sense; if it’s failing all over, patching throws good money after bad.
A standard concrete driveway replacement runs $4,500 – $12,000, which sits below paver and asphalt alternatives for the same footprint. Asphalt paving comes in lower per square foot but needs resurfacing and resealing repeatedly, and pavers cost more upfront. Concrete holds up best in the South Florida sun when it’s poured to the right thickness with proper reinforcement and drainage.
Every concrete driveway we pour is backed by our 730-Day Done Right Promise – if the workmanship isn’t right, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers the pour, the finish, and the base work. Cracks that appear after the slab cures are a different conversation than a bad pour, and we walk you through the difference up front. Call (844) 761-9356 for an exact quote – estimates are free.
Get a Free On-Site Estimate in Kendall
Every concrete driveway and concrete work project in Kendall starts with a free on-site estimate. We measure the slab, check the base and drainage, and hand you a written line-item price with no change orders hiding in it. Calls are answered by a live person, 24/7, so you’re never routed to a voicemail. Call (844) 761-9356 to schedule your free estimate and design consult – our technicians bring up to 12 years of experience to every pour.
Written by the team at Groundwork Construction Co.