Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Energy-Efficient Windows in Kendall, FL: What They Cost and How Fast They Go In
Energy-efficient window replacement in Kendall typically runs $4,500 to $15,000 for a whole-house job, and most homes are finished in three to five working days from tear-out to final inspection. The number that matters here is the one on your FPL bill and the one on the Miami-Dade permit, and both are decided before a single frame comes out. Call (844) 761-9356 for a free on-site estimate and a written, line-item quote.
How we run an energy-efficient window job, stage by stage
Window replacement looks simple from the curb. It isn’t. Here’s the actual sequence we follow on a Kendall home, and what you’ll be deciding at each step.
Stage 1: Measure, moisture check, and product approval (day 1, about 2 hours)
We measure every opening, check the existing frames for rot and water intrusion, and confirm which windows face the afternoon sun. That last part matters more in Kendall than most homeowners expect. You’ll decide here whether you’re replacing everything or prioritizing the west- and south-facing glass first. We also confirm the Miami-Dade product approval for the exact window you’re choosing – no approval, no permit, no install.
Stage 2: Permit filing and HOA submittal (days 2 to 10, depending on the county)
We pull the Miami-Dade County permit and, where your community requires it, submit the product spec sheet to your HOA architectural review board. This is the long pole on a Kendall job. Some HOAs turn a submittal in a week; some take three. You’ll decide on frame color and grid pattern during this window, because changing it later means resubmitting.
Stage 3: Protection and tear-out (day 1 on site, roughly 4 to 6 hours)
We drop cloths, tape off flooring, and remove the old units. On 1970s and 1980s CBS homes, expect some stucco repair around the openings – the original frames are often bedded tight and come out in pieces. We don’t hide that cost; it’s in the line-item quote before we start.
Stage 4: Install, shim, seal, and flash (days 2 and 3)
New units go in level and plumb, get shimmed, foamed, sealed, and flashed at the sill and head. This is where the energy performance you paid for either holds or leaks away. You’ll decide whether you want interior trim replaced or the existing casing reused. Most Kendall homeowners reuse where the casing is sound.
Stage 5: Inspection and walkthrough (day 4 or 5)
The county inspector signs off, we walk every opening with you, and you get the product warranty paperwork in hand. Most jobs finish in a single visit per floor; a full-house job on a larger lot runs the full three to five days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Energy performance comes down to three things: the glass package, the frame material, and how well the unit is installed. Here’s the honest version of each choice.
- Single-hung vs. casement. Single-hung is the cheaper, most common replacement in Kendall and the easiest to match to existing openings. Casements seal tighter and cost more. If your goal is cutting heat gain on a sun-baked wall, casement is the better buy.
- Low-E glass vs. standard clear. Low-E coatings cut solar heat gain and protect furniture from fading. In this climate, they pay back faster than almost any other upgrade. Standard clear costs less up front and does less.
- Vinyl vs. aluminum frames. Vinyl insulates better and won’t conduct heat. Aluminum is stronger and more common on older Miami-Dade homes, which can matter for match and structural replacement. Neither is wrong; the choice depends on the opening.
- Impact-rated vs. non-impact. Impact glazing costs more but eliminates the plywood routine every hurricane season and often lowers insurance premiums. Many Kendall homeowners go impact on the exposed sides and standard on protected walls.
- Brands and profiles. We work with Mr-Glass and ViewLux on the value and mid-tier side, and Therma-Tru where a matching entry door and sidelight are part of the scope. Andersen and Marvin are available when the budget supports a premium look.
What energy-efficient windows cost in Kendall, FL
Whole-house energy-efficient window replacement in Kendall lands between $4,500 and $15,000 for most homes, with impact-rated packages running $8,000 to $25,000. Where your job falls in that range depends on five things.
| Cost factor | What moves the number |
|---|---|
| Number of openings | A 12-window job sits at the low end; 25 windows pushes the high end. |
| Glass package | Low-E adds cost per unit; impact-rated glass adds more. |
| Frame material | Vinyl is the budget option; premium wood and clad runs higher. |
| Existing condition | Rotted frames, stucco damage, or water intrusion add repair scope. |
| Permit and HOA scope | County permitting and product-approval paperwork carry real cost. |
A written estimate from us lists every opening, the glass spec, the frame material, the labor, and the permit fee, with no change orders once work begins. What’s typically not included: drywall or stucco repair beyond the immediate opening, interior painting, and any structural repair discovered after tear-out. We price those separately if they come up. Call (844) 761-9356 for a written line-item quote and an exact figure for your home.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall homes specifically do to this job
Kendall is a hard-built corner of unincorporated Miami-Dade west of the Turnpike, and nearly every window job here means working inside an already-improved 1970s-1990s CBS home rather than starting fresh. That changes the job in ways a generic contractor won’t warn you about. The original aluminum frames are often bedded tight in stucco, so tear-out goes slowly and stucco repair is routine, not an exception. The home’s 40-year recertification history matters too: if your structural report flagged anything on the exterior envelope, we want that in hand before we reset a frame. And in HVHZ territory, no window goes in without the county’s product approval, so the paperwork question honestly does come before the price question.
Then there’s the salt air. If your home sits on the east side of Kendall near the Turnpike and the push toward the coast, the stainless hinges, nylon rollers, and coated hardware we spec fight a corrosion problem inland contractors don’t think about. Same with the frequent afternoon downpours – sill flashing done wrong shows up as a wet window in year two, not year one. If you’re pairing this with a wider exterior scope, it’s often easier as part of a full Windows & Doors in Kendall plan, and many homeowners pair this with Iron Fence in Kendall or Fence Repair in Kendall while we’re already set up on site. We cover the whole Kendall area, ZIP 33176, plus Richmond Heights, Sunset, The Crossings, and Three Lakes.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions about Energy-Efficient Windows in Kendall
Plan on three to five working days on site, plus the permit wait. The install itself is fast. The Miami-Dade permitting and product-approval step is what sets the real calendar, and we file early to keep it moving.
Yes, Miami-Dade County requires a permit for window replacement, and the units must carry the county’s product approval. We pull the permit and handle the inspection; you don’t touch the paperwork. Call (844) 761-9356 if you want us to walk your specific opening first.
In almost every Kendall replacement we do, yes. Windows are set in the existing opening, so plumbing and structure stay put. The exception is a rotted frame or a structural issue flagged in a recertification report, which we catch at measure.
Most homes land between $4,500 and $15,000, and impact-rated packages run $8,000 to $25,000. The exact figure depends on opening count, glass package, and existing condition. Call (844) 761-9356 for a free written estimate.
Our work carries the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction: if it’s not done right, we make it right. The product warranty comes separately from the manufacturer, and you’ll have that paperwork at the final walkthrough.
Get a free energy-efficient window estimate in Kendall
Call (844) 761-9356 for a free on-site estimate on your Energy-Efficient Windows in Kendall. A live person answers 24/7 to book the visit. We measure, check for moisture and frame condition, walk you through your glass and frame options, and hand you a written line-item quote with the permit fee in it. If it makes sense to widen the scope into a Windows & Doors project, we’ll talk through it. No change orders, no surprises on price, and the 730-Day Done Right Promise standing behind the install.
Written by the team at Groundwork Construction Co.