Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Westwood Lakes, FL: What They Cost and How They Get Built
Custom & Geometric Windows in Westwood Lakes usually run $8,000 – $25,000 for a full-house package of arched, round, angled or trapezoid units, and four to nine weeks from signed design to final inspection. The wide range comes down to shape complexity, frame material, and whether the openings have to be re-framed to accept a non-rectangular unit. Call (844) 761-9356 for a free on-site estimate with a written, line-item quote.
How a Custom Window Job Actually Runs in Westwood Lakes
Most contractors won’t quote a radius window over the phone, and for good reason. A geometric opening is a different animal from a stock rectangle, and skipping steps gets expensive fast. Here’s the sequence we follow on a Westwood Lakes job.
Stage 1: Measure and template (Day 1, about 2 – 3 hours)
We measure the rough opening, check for out-of-square framing, and note whether the wall is concrete block or wood-framed. On Westwood Lakes’ CBS homes this determines the anchor and flashing approach. You’ll decide at this stage whether you’re keeping the existing opening or enlarging it, because that decision changes the permit scope.
Stage 2: Design and glass spec (Days 2 – 7)
We bring the shape options and glass packages, and you choose material, trim style, and glazing. This is the longest decision window in the job, so we build in time rather than rushing a choice on a $25,000 package. You’ll sign off on a dimensioned drawing before anything is manufactured.
Stage 3: Permit and order (Weeks 1 – 2)
Miami-Dade permits for window replacement require product approval numbers and a wind-load review, so we submit with the drawings and wait for the county. Manufacturing runs parallel to permitting. Custom shapes take longer to build than standard sizes, so we don’t book an install date until the units ship.
Stage 4: Prep and install (Days 1 – 3 on site)
We demo the old units, inspect the framing for rot and old flashing, reframe the openings for geometric shapes, flash the perimeter, and set the windows. Westwood Lakes CBS walls take longer to open than wood frame, so plan on the longer end of this window. Water intrusion at the sill and head is checked and corrected before the unit goes in, not after.
Stage 5: Trim, seal, and final inspection (Days 3 – 5)
We install interior and exterior trim, seal and caulk the perimeter, and schedule the county inspection. You walk the job, we correct punch items, and the 730-Day Done Right Promise starts on the date of substantial completion. If something fails after that, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Frame material: Vinyl is the budget-friendly choice and works well for standard shapes but can’t be formed into tight radii. Aluminum handles curves and angles and suits the modern look; it costs more and needs a thermal break in South Florida heat. Wood gives the most design flexibility for true radius and trapezoid work; it costs the most and needs more maintenance.
- Glass package: Low-E impact glass is the standard for Westwood Lakes homes, and it’s what the county wind-load review expects. Tempered laminated glass costs less than full impact but doesn’t meet the same code path. Ask what each option does to your insurance premium before you commit.
- Shape complexity: A single eyebrow arch over a front entry is straightforward. A full wall of trapezoids and half-rounds means more templating, more framing, and more flash points. Complexity is the biggest driver of the top end of the range.
- Trim and finish: Aluminum-clad exterior trim and wood interior trim hold up best in Florida sun and rain. James Hardie exterior trim is a durable option on the wall side of the opening. You’ll pick the profile: modern flat or traditional colonial.
- Michael’s note on brands: We work with established window manufacturers so the product approval paperwork is clean and the warranty chain is documented. That matters more on geometric units than on standard sizes, because there’s less room to swap parts later.
What Custom & Geometric Windows Cost in Westwood Lakes, FL
For a single geometric feature window, expect $1,800 – $4,000 installed. For a full-house package combining standard and custom shapes, budget $8,000 – $25,000. Impact-rated geometric units sit at the top of those ranges because the product approval and lamination cost more.
What pushes a job to the low end: standard sizes with one arch, vinyl frames, keeping existing openings. What pushes it to the high end: full-radius and trapezoid work, wood or thermally broken aluminum frames, enlarging openings (which means structural framing and a larger permit), and second-story installations where staging takes longer.
Your written estimate covers the windows, glass, installation, flashing, trim, permit fees, and final inspection. It doesn’t cover interior drywall repair from demo, painting, or HOA architectural review fees. Ask about those upfront so there are no surprises. Call (844) 761-9356 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhat Westwood Lakes Homes Specifically Do to This Job
Westwood Lakes is a built-out, post-war suburb where nearly every project is a renovation on a 1950s – 1970s lot, not new construction. The housing stock is mostly single-story CBS homes with flat or low-pitch roofs, original terrazzo floors, and old jalousie windows. That last detail matters most here: jalousie frames were never designed for today’s storm intensity, and after heavy summer downpours the flat-roofed homes on the interior streets often show hidden water intrusion at the roof-wall junctions and around the window openings. On a custom window job, we check those junctions first, because a beautiful new picture window doesn’t help if the wall behind it is wet.
Miami-Dade’s post-Surfside recertification and 40-year inspection rules affect any aging CBS home getting major exterior work. If your Westwood Lakes home is approaching that milestone, the window upgrade and the structural inspection often get scheduled together. We handle the permit and inspection side, and our Westwood Lakes service connects you to local crews who know the county process.
Serving Westwood Lakes, FL – Our Local Coverage Area
We serve Westwood Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Westwood Lakes
Plan on four to nine weeks total, with two to three days of actual installation. Manufacturing and Miami-Dade permitting run in parallel, so the wait is usually the custom build time, not the install. Call (844) 761-9356 to get a timeline for your specific openings.
Yes, Miami-Dade requires a permit for window replacement, and custom geometric units need product approval numbers plus a wind-load review. We submit the drawings and inspection paperwork for you. Call (844) 761-9356 and we’ll walk through what your project needs.
Often, yes, as long as the new unit fits the existing opening. If you want to enlarge or reshape the opening, that’s a structural change and a bigger permit. We’ll tell you on day one whether your design fits the frame you have. Call (844) 761-9356 to schedule the measure.
Expect $1,800 – $4,000 installed for one feature unit, depending on shape, frame material, and glass. A full-house package runs $8,000 – $25,000. The complexity of the shape and the glass package move the number most. Call (844) 761-9356 for an exact quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Manufacturer warranty on the units runs longer and we hand you the documentation. Call (844) 761-9356 with questions.
Get a Free Custom & Geometric Windows Estimate in Westwood Lakes
Call (844) 761-9356 to schedule a free on-site estimate for Custom & Geometric Windows in Westwood Lakes. We’ll template the openings, talk through shapes and glass, and hand you a written line-item quote with the permit and install costs spelled out. If the project includes other exterior work, we can fold it into one plan; homeowners often pair this with Concrete Driveways & Concrete Work in Westwood Lakes or Asphalt Driveways & Resurfacing in Westwood Lakes while the yard is already torn up. Our Windows & Doors team handles the rest. If you’re weighing a full exterior scope, it’s part of a full Windows & Doors in Westwood Lakes plan. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.