Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Palmetto Estates: What It Takes and What It Costs
Replacing a bathroom vanity, re-tiling the floor and walls, and swapping out fixtures in Palmetto Estates runs $9,000 to $28,000, and most of these jobs finish in two to three weeks once materials are on site. The small jobs, like a vanity and tile on a single floor, land closer to $5,000 to $12,000. Call (844) 761-9356 for a free on-site estimate on Vanities, Tile & Fixtures in Palmetto Estates, FL, and we’ll walk your bathroom line by line before you commit a dollar.
We keep these jobs tight on purpose. One room, one crew, one written scope, and no wandering into work you didn’t ask for.
How the job actually runs, stage by stage
Most homeowners have never had a bathroom torn apart and want to know what the days look like. Here’s the sequence we follow on Vanities, Tile & Fixtures work in Palmetto Estates. Vanity, tile and fixture work can also be one piece of a full Bathroom Remodeling in Palmetto Estates if the room needs more than surface work.
Stage 1: Demolition and tear-out (day 1 to 2)
We pull the old vanity, mirror, toilet, towel bars and the tile down to the substrate. In Palmetto Estates CBS homes, that usually means cutting tile off concrete block or a mortar bed, which is slower than pulling tile off drywall. We cap or shut the water at the fixtures, protect the rest of the house with drop cloths and plastic, and haul debris out same day. You decide here whether the toilet and sink go back in their current spots or move.
Stage 2: Rough-in, framing and waterproofing (days 2 to 4)
If plumbing or electrical is moving, this is when it happens: relocating a drain for a new vanity, adding a GFCI outlet for a lighted mirror, moving a supply line. We patch and square the walls, then apply a bonded waterproofing membrane behind whatever tile is going in a wet zone. Inspections, where the county requires one for plumbing or electrical changes, get scheduled at this point and we handle pulling them. You approve the layout markings before a single tile goes up.
Stage 3: Tile setting (days 4 to 9)
Floors go first, then walls, then any shower or tub surround. A 40-square-foot bathroom floor in 12×24 porcelain sets faster than a complicated mosaic pattern, and a full-height wall tile runs two to three extra days over a wainscot height. Grout and sealant come after the thinset cures, which is typically the next day. You choose grout color and tile layout before this stage, not during it, so the crew doesn’t stall.
Stage 4: Vanity and fixture installation (days 9 to 12)
We set the vanity level and secure it to the wall, cut and fit the top, drop the sink and faucet, install the mirror, lighting and any hardware. Toilet goes back in, the shower trim and valve get set, and we check every supply and drain for leaks before closing up. You confirm hardware finish and faucet style here if you haven’t already.
Stage 5: Final walkthrough and touch-up (days 12 to 14)
We caulk, touch up paint, clean the room and walk it with you. Anything you flag goes on a punch list and gets fixed before we call it done. All of this sits under the 730-Day Done Right Promise, so if something fails later, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
Vanities, tile and fixtures are where a bathroom goes from functional to yours, and the options are wider than most people expect. Here’s the honest read on each.
- Vanity material and size: A stock 36-inch cabinet in painted MDF or plywood is the budget play and holds up fine in a dry zone. A solid-wood or plywood cabinet with a furniture finish costs more and looks better in a smaller room. Sizes run 24 to 72 inches, and a double-sink layout needs at least 60 inches to feel comfortable.
- Vanity top: Cultured marble is the value pick at the low end of the $800 to $3,000 vanity range and resists staining well. Quartz and natural stone cost more but read as higher-end and last longer. Porcelain tops are the middle ground. Sink style, undermount versus drop-in, changes the install time and the look.
- Tile for floor and walls: Porcelain is the workhorse, easy to clean and durable. Ceramic costs less but chips more easily. Natural stone looks great but needs sealing and more upkeep. Large-format 12×24 or 24×24 tiles cut down grout lines and set faster; mosaics and small hex take far longer and cost more in labor.
- Fixtures: A standard chrome faucet is dependable and cheap; brushed nickel, matte black and brass finishes cost more and show water spots differently. Brand matters for cartridge and finish longevity. Kohler faucets, for example, are a common choice when a homeowner wants parts available years down the road. Therma-Tru entry doors are worth considering if the bathroom sits near an exterior door you’re also replacing.
- Shower trim and glass: A basic pressure-balance valve and standard trim works; a thermostatic valve and higher-end trim costs more but handles temperature swings better. Frameless glass is a look, not a necessity, and it adds cost.
What Vanities, Tile & Fixtures costs in Palmetto Estates, FL
For a Palmetto Estates bathroom where you’re replacing the vanity, tiling the floor and walls, and updating fixtures without moving much plumbing, expect $9,000 to $28,000. A tight scope with stock materials lands near the bottom; a larger room with stone tops, full-height tile and relocated plumbing pushes toward the top. Here’s the line-item breakdown:
| Item | Typical range |
|---|---|
| Vanity and top installation | $800 – $3,000 |
| Floor and wall tile (per job) | $3,000 – $9,000 |
| Fixture replacement (faucet, shower valve, hardware) | $1,200 – $4,000 |
| Plumbing or electrical relocation | $1,500 – $5,000 |
| Demo, prep and waterproofing | $1,000 – $3,500 |
What moves the number: room size (a 35-square-foot bathroom costs less than a 70-square-foot one), existing condition (old mortar beds are slower to demo than thinset on drywall), whether anything moves (a relocated drain or new outlet means a permit and a rough-in), material grade (quartz versus cultured marble, porcelain versus stone), and permit scope. A written estimate lays out each line, materials and labor, so the number you see is the number you pay. What typically isn’t included: structural repairs found after demo, mold remediation, and upgrades you add mid-job. Call (844) 761-9356 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Palmetto Estates homes specifically do to this job
Palmetto Estates is unincorporated Miami-Dade, which changes the paperwork on a bathroom job more than most people expect. Permits go through Miami-Dade County’s unincorporated process, not a city hall, and when you’re near the canals or the coast, a floodplain review can stack on top of the county’s HVHZ wind rules. That’s the combination crews from neighboring incorporated cities don’t deal with every day. The 1960s to 1980s CBS ranch houses here also commonly have original single-pane windows and old mortar-bed tile, both of which make demo slower and can hide moisture damage once the old surfaces come off. We plan the schedule around the six-month storm season so wet trades don’t sit idle during afternoon rain. If the same reno touches your exterior, homeowners often pair this with Tile Roofing in Palmetto Estates or, on flatter low-slope sections, Specialty Roofing in Palmetto Estates.
Serving Palmetto Estates, FL – Our Local Coverage Area
We serve Palmetto Estates and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about Vanities, Tile & Fixtures in Palmetto Estates
Two to three weeks for most Palmetto Estates bathrooms once materials are delivered, with tile setting eating the biggest chunk of that time. A smaller job like a vanity and floor tile alone can wrap in a week. Call (844) 761-9356 to get a schedule for your specific room.
Yes, you typically need a Miami-Dade County permit when plumbing, electrical or structural work is involved, even if it goes through the unincorporated process rather than a city. A cosmetic swap, like a new vanity and tile without moving anything, may not trigger one. We pull the permits and pass the inspections as part of the job.
Yes, and keeping the existing layout is the biggest cost-saver on Vanities, Tile & Fixtures work. If the drain and supply lines stay put, you skip the rough-in and the associated permit inspection, which saves both time and money. If you want the sink or toilet moved, say so at the estimate so we can price it in.
Between $9,000 and $28,000 for a full vanity, tile and fixture update, and $5,000 to $12,000 for a smaller version. Material grade and whether anything moves are the two biggest factors. Call (844) 761-9356 for an exact quote; estimates are free.
The 730-Day Done Right Promise covers every Vanities, Tile & Fixtures job we do in Palmetto Estates. If something isn’t right within that window, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. For the wider project scope, see the bathroom remodeling service hub and our Palmetto Estates service area page.
Get a free estimate on Vanities, Tile & Fixtures in Palmetto Estates
We’ll come out, measure the room, talk through what’s moving and what isn’t, and hand you a written line-item estimate the same visit. No change orders, no surprises, no pressure. The number you see is the number you pay. Call (844) 761-9356 to schedule your free estimate for Vanities, Tile & Fixtures in Palmetto Estates, and we’ll answer questions before you decide.
Written by the team at Groundwork Construction Co.