Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Kendall, FL: What the Job Runs and What It Costs
Replacing a bathroom vanity, re-tiling the floor and shower walls, and swapping out fixtures in a Kendall home usually runs $9,000 to $28,000 for a full gut-and-redo, or $800 to $3,000 if it’s vanity only. Most full projects take 2 to 4 weeks once materials land, and every job needs a written, line-item estimate before demo starts. Call (844) 761-9356 and we’ll walk the room, measure, and put real numbers in front of you.
How the Vanities, Tile & Fixtures Job Actually Moves, Stage by Stage
Anyone can hand you a catalog. Here’s the actual sequence we run on a Kendall bathroom, with real durations so you know what your week looks like. No truck shows up unannounced and starts swinging a hammer.
Stage 1 – Walkthrough and written scope (day 1, about 90 minutes)
We walk the room with you, measure the vanity footprint, check the existing tile underlayment, and test what’s behind the wall where the fixtures sit. You get a written scope with line-item pricing the same week. This is where you decide the priority: vanity and top first, tile second, fixtures last, or all at once. That decision drives everything downstream.
Stage 2 – Material selections locked down (days 2 – 5)
You pick the vanity, the countertop material, the tile, the grout color, and the fixtures. This sounds simple. It’s the stage that blows timelines when homeowners haven’t seen samples in person. We bring finish samples, help you choose between quartz and granite for the top, and confirm the fixture package so nothing gets ordered twice. KraftMaid cabinets are an option we specify often because the lead time is predictable, and a predictable lead time is what keeps your install date.
Stage 3 – Demo, rough-in, and substrate prep (days 1 – 3 of the build)
Out comes the old vanity, tile, and fixtures. We inspect what’s underneath. In a 1970s-to-1990s Kendall home, that inspection matters more than the pretty stuff. We check the subfloor for rot, confirm the drain and supply lines are sound, and if you’re keeping the rough-in where it is, you save real money here. If we’re relocating the vanity or moving a shower valve, this is the day that decision gets priced.
Stage 4 – Tile, vanity, and fixture install (days 4 – 10)
Waterproofing goes in first, then tile set, then vanity, then countertop, then fixtures. Each trade waits until the one before it is done. We don’t stack them and hope. Grout and caulk get a full cure window before the water goes on. This is where the job looks finished for three days longer than you’d expect, and where a bad crew cuts corners that show up in 18 months.
Stage 5 – Punch walk and warranty hand-off (final day, about 1 hour)
You walk the room with us. Every alignment, every grout line, every fixture gets checked against the scope. Any punch item gets fixed before the crew leaves. Your workmanship is covered by the 730-Day Done Right Promise, which means if something fails, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Vanities, Tile & Fixtures Options, With the Honest Trade-offs
- Vanity cabinet – stock vs. semi-custom. Stock (KraftMaid, Wellborn, or similar) comes in standard sizes and installs fast. Semi-custom gets you odd widths and a better finish, but it adds 3 – 6 weeks of lead time and $400 – $1,200 to the tab. In a Kendall home where the existing vanity is a 1970s holdover at 30 inches, stock is usually the smart call.
- Countertop – quartz vs. granite vs. solid surface. Quartz takes abuse and doesn’t need sealing, but it’s the priciest of the three. Granite is durable and cheaper, though it wants annual sealing. Solid surface is the budget pick and shows scratches. Figure $800 – $3,000 for a vanity install depending on which you pick.
- Floor and wall tile – porcelain vs. ceramic vs. natural stone. Porcelain is denser, holds up better to humidity, and holds its color. Ceramic is lighter and cheaper. Natural stone needs sealing and can stain. In a humid Miami-Dade bathroom, porcelain earns its keep.
- Fixtures – chrome vs. brushed nickel vs. matte black. Chrome is cheapest and easiest to clean. Brushed nickel hides water spots and holds up in salt-laden air. Matte black looks sharp but shows every fingerprint. Kohler and similar brands get specified because the finish warranties are real.
- Shower valve and trim – keep the rough-in or replace it. Keeping the existing valve saves $300 – $800. Replacing it during a tile job costs a little more but means you won’t be re-cutting tile in three years when it fails.
What Vanities, Tile & Fixtures Costs in Kendall, FL
A full vanities, tile & fixtures package in Kendall runs $9,000 to $28,000. If you’re doing vanity only, expect $800 to $3,000. If you’re pairing this with a broader renovation, the scope becomes part of a full Bathroom Remodeling in Kendall project and that’s where the number lands at the top of the range.
Five things push a job to the high end:
- Room size and tile square footage. A 40-square-foot floor with a 30-square-foot shower surround is one price. A 100-square-foot room with floor-to-ceiling tile is another.
- Relocating plumbing or electrical. Moving the vanity or adding an outlet behind it means opening the wall and pulling a permit. That’s $1,500 – $4,000 on top.
- Existing condition. Rotted subfloor, corroded shut-off valves, or a failed flange adds labor. We price it as it’s found, in writing, before we proceed.
- Material grade. A $200 vanity and a $600 vanity cost the same to install. The delta shows up in the line item, not the labor.
- Permit scope. A cosmetic swap usually needs no permit. Moving any plumbing or electrical line does. Miami-Dade County permits add paperwork time and a flat fee, and we pull them and pass the inspection.
A written estimate covers demo, substrate prep, tile set, grout, vanity install, countertop template and install, fixture installation, and clean-up. It usually doesn’t cover plumbing relocation, tile overage, or structural changes if we find them. We tell you that up front. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall Homes Specifically Do to This Job
Kendall is a built-out corner of unincorporated Miami-Dade west of the Turnpike. Nearly every job here is rebuilding an already-improved lot, not starting from a clean one. The housing stock is mostly 1970s-to-1990s concrete block and CBS, which means when we take out your vanity and tile, we’re often working against 30 to 50 years of moisture, patched plumbing, and the occasional DIY shortcut a prior owner made.
Permits run through Miami-Dade County, and this is a permitting-heavy county to build in. The 40-year recertification and post-Andrew HVHZ product-approval environment means paperwork drives the schedule as much as the tile saw. If we’re moving plumbing or electrical as part of the vanities, tile & fixtures work, that permit gets pulled and that inspection gets passed. We handle both.
And here’s the thing experienced contractors in this ZIP (33176) all know: after a bad summer microburst, water finds its way into the wall behind a shower surround and the floor behind a vanity. Those are the failures we see most. We check for them on every Kendall job. While we’re in the bathroom, homeowners often pair this with repairing the Tile Roofing in Kendall that took the same storm damage.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Vanities, Tile & Fixtures in Kendall
A vanity-only swap takes 1 to 2 days. A full floor and shower tile package with a new vanity and fixtures takes 2 to 4 weeks, including the cure time between tile and grout and the permit inspection if one’s needed. Call (844) 761-9356 to lock in a start date and get a real timeline.
Cosmetic replacement, meaning tile over tile, a new vanity dropped where the old one sat, and fixtures swapped on existing valves, usually doesn’t need a permit. Moving a drain, supply line, or electrical outlet does, and Miami-Dade County enforces it. We pull the permit and pass the inspection so the work is on record.
Yes, and that’s the cheaper path. Keeping the vanity in the same footprint, using the same drain location, and leaving the wall structure alone keeps the job in the $9,000 – $14,000 range. Relocating anything pushes it toward the $20,000 – $28,000 end because of the rough-in work and the permit.
The full vanities, tile & fixtures package typically runs $9,000 to $28,000 in Kendall. Vanity-only sits at $800 to $3,000. The number you get in writing is the number you pay. Call (844) 761-9356 for your free estimate.
Every project is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If our install fails, we come back and fix it. The material warranties from brands like KraftMaid and Kohler ride on top of ours.
Get a Free Estimate on Vanities, Tile & Fixtures in Kendall
Call (844) 761-9356 for a free on-site estimate. A live person answers any hour, any day. We’ll measure the room, walk the existing condition, and give you a written line-item quote with the number fixed. No change orders, no guesswork. If you’re planning this as part of a larger Bathroom Remodeling scope, we price that together. We work throughout Kendall and the surrounding neighborhoods, and we’d be glad to walk your project and put a real number on it.
Written by the team at Groundwork Construction Co.