Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Kendall, FL: What It Costs and How Long It Takes
Most aluminum fence installations in Kendall, FL run $4,000 to $10,000 for a typical suburban lot, with the lead range for most homes landing between $3,500 and $9,000. A standard 150- to 200-linear-foot installation takes two to three days on site once Miami-Dade County permits clear, and that does not count the two to four weeks the county can take to review and approve. Aluminum fence is the smart choice for Kendall because the salt-laden coastal air eats through steel hardware and wood posts years faster than it does inland, and aluminum with stainless fasteners holds up without repainting. Call (844) 761-9356 for a free on-site estimate; we’ll measure the run and give you a written line-item quote.
How We Install an Aluminum Fence in Kendall, Step by Step
The sequence matters, and so does the timing. Here’s what actually happens when we install an aluminum fence on your property, and what you need to decide at each stage.
Stage 1: Site visit and layout (day 1, about an hour)
We walk the property line with you, confirm the fence height and panel style, and mark post locations with stakes. This is when you decide gate placement and whether you want a pedestrian gate, a double drive gate, or both. We also check for irrigation lines and buried utilities so we don’t drill through them. If you’re planning a wider outdoor project, this is where we’d talk about how Fence Installation in Kendall fits into a full yard plan.
Stage 2: Permit submission (days 2 to 14 or longer)
In unincorporated Miami-Dade, aluminum fence installations need a permit and, for anything over a certain height, engineered drawings. We handle the application, submit the NOA product approvals, and wait on the county. This is the longest stage of the job, and it’s entirely out of our hands once the paperwork is filed. You don’t have to do anything here except sign the authorization.
Stage 3: Demo and post-hole layout (day 1 on site, 4 to 6 hours)
Once the permit’s in hand, we remove any old fence and stake the final panel layout. Post holes go down 30 to 36 inches, which is deeper than the fence code minimum because South Florida soil and wind loads demand it. If the existing fence has a concrete footer, that gets broken out and hauled away, which adds a few hours.
Stage 4: Posts set and cured (day 1 to day 2)
We set posts in concrete and let them cure overnight. Aluminum posts don’t rust like steel, but the concrete collar is what keeps the whole run straight through a wet season. You’ll want to keep vehicles and pets off the new footings for about 24 hours.
Stage 5: Panels, gates, and final inspection (day 2 to day 3)
Panels get hung, gates get aligned and latched, and the county inspector signs off. Most residential runs finish in a single on-site day after the cure, with larger jobs spilling into a third. Our technicians have up to 12 years of experience with these installations, and the finished job stays covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Aluminum fence isn’t one product. The choices you make at the estimate stage determine both the price and how the fence looks five years from now.
- Residential vs. industrial grade. Residential aluminum runs 1/16 to 1/8 inch wall thickness. Industrial grade is thicker and shoulders more wind load. For most Kendall yards residential is fine, but if you’re bordering a canal or open lot, step up.
- Powder coat finish. Standard black or bronze powder coat holds its color for a decade or more in salt air. Custom colors cost more and can fade faster. Stick with a factory finish if you want the longest life.
- Picketed vs. flat-top panels. Pickets with spear tops are the classic ornamental look. Flat-top panels are cleaner and cheaper per foot. Both work; the choice is aesthetic.
- Post caps and finials. Ball caps, flat caps, and decorative finials run $3 to $15 each. Small dollars, big visual difference.
- Gate hardware. Stainless hinges and a self-closing latch are worth the upcharge in coastal Kendall. Standard zinc hardware corrodes within a couple of seasons near the salt air.
- Screening slats or privacy inserts. If you want more privacy than pickets allow, aluminum slats add cost per panel but keep the low-maintenance benefit. For full privacy, a different material makes more sense; our Fence Installation service page covers those options.
What an Aluminum Fence Costs in Kendall, FL
Plan on $4,000 to $10,000 for a typical installation, with most jobs falling in the $3,500 to $9,000 band. A small front-yard run might come in near $3,500; a fully fenced half-acre with a double drive gate pushes toward $9,000 or higher.
What moves the number:
- Linear footage. The dominant factor. More fence, more panels, more posts, more concrete.
- Gate count and type. A double drive gate can add $800 to $2,000 on its own.
- Old fence removal. If there’s a wood or chain-link fence to tear out, expect $300 to $700 in disposal and labor.
- Grade and terrain. A flat lot is fast. Sloped runs need stepped panels and more posts.
- Permit scope. Standard residential permits are straightforward, but corner lots, easements, and pool enclosures bring more county review time and fees.
Your written estimate includes materials, labor, permit fees, post concrete, gate hardware, and clean-up. It doesn’t include utility locating (usually free, but you should call 811 yourself), HOA submission fees, or landscaping repair if we have to dig through a flower bed. The price on the estimate is the price you pay; we don’t do change orders after the fact.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall Homes Specifically Do to This Job
Kendall is a fully built-out suburban corner of unincorporated Miami-Dade west of the Turnpike, ZIP 33176, and nearly every fence job here is a rebuild on an already-improved lot. That means working around existing concrete, irrigation, and mature oaks, and it means dealing with Miami-Dade County permitting at every step. Aluminum fence still needs a permit, engineered product approvals under the Hurricane Verified Home standard, and an inspector’s sign-off. Post-Andrew wind code changed how fence posts get anchored, and the county wants to see the NOA paperwork before the first hole is dug.
The 1970s-to-1990s CBS homes that dominate the tract neighborhoods around Kendall Drive and the east side tend to have an existing fence line that’s already failing. Wood posts rot at the base from the wet season, steel pickets rust through where the powder coat chips, and the original concrete footer often sits too shallow for today’s wind spec. Combined with the salt-laden air and afternoon downpours, the timelines here are shorter than they’d be inland. When a tropical storm rolls through, the calls come in fast. If your project also includes hardscaping, homeowners often pair this with Driveway Repair & Replacement in Kendall or a new Patios, Walkways & Pool Decks in Kendall project so the whole yard comes together in one permit cycle. We serve all of Kendall, including the neighborhoods out toward Sunset and The Crossings.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Kendall
Two to three days on site, plus two to four weeks of permit review before we can start. The wait is the county, not the crew. Some HOAs add their own architectural review time on top of that. Call (844) 761-9356 and we’ll walk you through the realistic schedule for your specific lot.
Yes. Miami-Dade County requires a permit for most residential aluminum fence installations, and the county wants engineered product approvals and wind-load compliance documentation. We pull the permit for you and coordinate the inspection. Call (844) 761-9356 and we’ll confirm exactly what your property needs.
Salt air corrodes steel and rots wood faster than most homeowners expect, but quality aluminum with stainless hardware holds up for decades. The failure we see most in Kendall is cheap zinc-plated hardware that rusts within two to three seasons. We use stainless hinges and latches on coastal installs. Call (844) 761-9356 to talk through the right spec for your location.
Most jobs run $4,000 to $10,000, with the typical range between $3,500 and $9,000 depending on footage, gates, and old-fence removal. Estimates are free and line-itemed, so you see exactly where the money goes. Call (844) 761-9356 for an exact quote on your property.
Every installation is backed by our 730-Day Done Right Promise: if something isn’t right, we come back and make it right. The factory powder coat and material warranty on the aluminum itself typically runs much longer and comes from the manufacturer. Call (844) 761-9356 for details on both.
Get a Free Aluminum Fence Estimate in Kendall
We’ll come out to your property, walk the fence line with you, and give you a written line-item estimate covering materials, labor, permits, and gate hardware. No pressure, no hidden surprises. Upfront pricing means the number on the estimate is the number you pay, and 0% financing for 18 months is available if you’d like to spread the cost. Call (844) 761-9356 to schedule your free estimate, or reach us any time; a live person answers 24/7.
Written by the team at Groundwork Construction Co.