Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Sunset, FL: What It Costs and What It Involves
An aluminum fence in Sunset, FL typically runs $4,000 – $10,000 for a standard residential lot, with most jobs landing in the $3,500 – $9,000 range once you account for gates and layout. A typical installation takes two to four working days from the first post hole to the last picket, depending on footage, grade changes, and whether we’re tearing out an existing fence first. Call (844) 761-9356 for a free on-site measurement and a written line-item quote.
How an Aluminum Fence Goes In, Start to Finish
Aluminum fence work moves in a fixed order, and knowing the sequence tells you what to expect and when you’ll need to make a call.
Stage 1: Site walk and layout (day one, 1 – 2 hours)
We walk the property line with you, confirm exactly where the fence sits relative to the survey, and flag anything in the path: irrigation lines, a sprinkler head, a buried cable, an old concrete footer. This is when you decide the fence height (4 ft, 5 ft, or 6 ft) and whether you want a gate at the side yard or the driveway. Anything decided here sticks, so it’s worth the extra ten minutes.
Stage 2: Utility locate and permit filing (day one to day three)
Before a single hole is dug, we call in the utility locate so nothing gets clipped underground. If your job needs a permit, this is where the paperwork goes in. In Sunset, that means filing through Miami-Dade County’s Unincorporated Municipal Services (UMS) rather than a city hall, and inspection scheduling can add several days to the front end. We handle the filing; you don’t chase it.
Stage 3: Demo and prep (day one or two, half a day)
If there’s an old fence, it comes down and goes out. Posts get set in concrete footings, spaced per the manufacturer spec, and the ground is graded so water moves away from the fence line. On Sunset’s flat lots, that drainage step matters more than most homeowners expect.
Stage 4: Panel and gate install (days two and three, 4 – 8 hours)
Rails, pickets, and gate hardware go up, and we rack the panels to follow the grade so the top rail stays visually level instead of stair-stepping. Gate hinges, latches, and closers get set and tested. You’ll want to be around at the end so we can walk the gate swing with you.
Stage 5: Final inspection and walkthrough (same day or next)
We check every post, every fastener, and every gate, then walk the finished fence with you. If a permit was pulled, the county inspection is scheduled here. You sign off, and the 730-Day Done Right Promise covers the workmanship from that point. If something isn’t right, we come back and fix it; that’s the whole point of the guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Choices That Actually Matter
Aluminum isn’t one product. The spec decisions below are the ones that change both the price and how the fence holds up over the years.
- Residential vs. heavy-duty gauge. Standard residential aluminum (roughly 16-gauge wall) is fine for a typical backyard. A heavier commercial gauge costs more per linear foot but takes a hit from a lawnmower or a stray branch far better. On a property with kids, pets, or a pool, the heavier spec is worth the upcharge.
- Powder-coat finish. Black is the default and the most durable. Bronze and white are common; a custom color adds cost and lead time. A quality powder coat holds color through Sunset’s sun and humidity; a cheap finish chalks within a few seasons.
- Picket spacing and height. A 4 ft fence with 4 in spacing keeps a small dog in. A 5 ft or 6 ft with tighter spacing gives more privacy and a stronger barrier. Height drives material cost and, in some cases, permit review.
- Gate style and hardware. A walk gate is one thing; a double drive gate is another, and self-closing hardware or a keyed latch adds cost. Decide now, because retrofitting a gate later means a new post.
- Rackable vs. fixed panels. Rackable panels follow a slope. Fixed panels are cheaper but only work on level ground. Sunset lots are mostly flat, but slight grade changes still need the rackable option.
What an Aluminum Fence Costs in Sunset, FL
For a Sunset aluminum fence, budget $4,000 – $10,000 as the realistic working range, with a lead figure of around $3,500 – $9,000 for a straightforward residential run. Linear footage, gate count, and site conditions move the number up or down.
Here’s what pushes a job toward the low or high end:
- Linear footage. A 100 ft run sits near the bottom; a 250 ft perimeter with multiple gates climbs toward the top. This is the single biggest driver.
- Existing fence removal. Tearing out and hauling an old chain-link or wood fence adds a demo-and-disposal line item.
- Material grade. Standard residential gauge lands lower; heavy-duty commercial gauge, custom color, and tighter picket spacing push upward.
- Gate count and hardware. Each additional gate, especially a drive gate with self-closing hardware, adds to the total.
- Permit scope. If the job requires a UMS permit and inspection, that cost and the added scheduling time are part of the quote.
A written estimate from us includes materials, labor, concrete footings, gates and hardware, demo if needed, haul-off, and permit filing where required. It typically does not include a survey (if one is needed to confirm the property line) or landscaping restoration beyond basic grading. Upfront pricing, no surprises: the number on the estimate is the number you pay. Call (844) 761-9356 for an exact quote on your Sunset property; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Sunset Homes Specifically Do to This Job
Sunset sits as an unincorporated Miami-Dade community, which means an aluminum fence project here runs through Miami-Dade County’s UMS for permitting and inspection, not a standalone city hall. That paperwork and scheduling quirk has a real cost in time: front-end days can stretch while inspection slots open up, and it’s the step out-of-area builders most often underestimate. We plan for it.
The housing stock matters too. Many Sunset homes date to the 1950s – 1970s, and a fair number still have old chain-link or failing wood fencing that’s been in the ground for decades. When we pull those out, we frequently find a buried footer, a rusted post base, or an irrigation line running exactly where the new post needs to go. Working around those without breaking the system is part of the job. The subtropical climate, intense sun, and a hurricane season peaking from August to October, also means a fence here has to be anchored and specified for wind loads, not just looks. On low-lying Sunset lots, we grade away from the fence line so heavy summer rain doesn’t pool at the posts. The zip we cover here is 33173, and we serve the surrounding blocks across Sunset without routing you elsewhere.
Serving Sunset, FL – Our Local Coverage Area
We serve Sunset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Sunset
A typical residential aluminum fence takes two to four working days once the fence material is on site. If a permit is required through Miami-Dade UMS, add several days to the front end for filing and inspection scheduling. Call (844) 761-9356 to get a firm timeline for your property.
It depends on height and location: many residential runs under a certain height don’t need one, but front-yard or taller fences often do, and in unincorporated Sunset that permit runs through Miami-Dade County’s UMS. We check the requirement for your specific lot and file it for you if it applies. Call (844) 761-9356 to confirm for your address.
Most residential aluminum fence projects in Sunset land between $4,000 and $10,000, with the lower $3,500 – $9,000 range holding for straightforward runs. Footage, gates, material grade, and demo drive the number. Call (844) 761-9356 for an exact written quote; the estimate is free.
No, with us it doesn’t. We give you a written, line-item upfront price before any work begins, and the number you see is the number you pay; the 730-Day Done Right Promise backs the workmanship. If we find a buried irrigation line or a surprise footer, we talk it through with you before proceeding, not after. Call (844) 761-9356 to start the estimate.
Yes. Every aluminum fence we install is covered by our 730-Day Done Right Promise: if the installation isn’t right, we come back and make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (844) 761-9356 with any warranty question before you commit.
Get Your Aluminum Fence Estimate in Sunset
If you’re ready to see real numbers for an aluminum fence on your Sunset property, call (844) 761-9356. We’ll set up a free on-site estimate, measure the run, walk the gate locations with you, and hand you a written line-item quote with no-obligation pricing. Calls are answered by a live person around the clock, and if your project grows into something bigger, an aluminum fence is often part of a full Fence Installation in Sunset scope. Homeowners often pair this with Driveway Repair & Replacement in Sunset or Patios, Walkways & Pool Decks in Sunset to finish the yard in one pass, and our broader Fence Installation service covers the rest. $1,000 off projects over $10,000 and 0% financing for 18 months are available.
Written by the team at Groundwork Construction Co.