Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Westwood Lakes: What It Costs and How Long It Takes
A typical aluminum fence in Westwood Lakes, FL runs $4,000 – $10,000 installed, with most single-family yards landing around $3,500 – $9,000 depending on linear footage, height, and whether the run crosses an existing concrete wall or patio slab. On a standard lot, the job takes two to four working days from demo to final walk, and that includes the county inspection where one is required. Call (844) 761-9356 to schedule a free on-site estimate. We’ll measure the property line and put the number in writing before any post goes into the ground.
How the Aluminum Fence Job Actually Runs in Westwood Lakes
We don’t hand you a start date and a shrug. Here’s what a Westwood Lakes aluminum fence project looks like stage by stage, so you know what’s happening on your property and when you’re needed to make a call.
Stage 1: Site visit and utility marking (day 1)
We walk the property line with you, note the setbacks that apply, and confirm where the fence will sit relative to your home, the driveway, and any neighbor’s existing wall. Before anything is dug, we call in the utility locates. In a built-out neighborhood like this, that matters more than it does on a new build: irrigation lines, old pool plumbing, and cable runs from past additions are common surprises even in a modest backyard.
Stage 2: Permit application and layout (days 1 – 5, depending on the county)
Most residential fence work in unincorporated Miami-Dade County does require a permit, so we handle the submittal and the site plan. This is where you decide height (4 ft, 5 ft, or 6 ft is the usual range) and confirm the final run with markers staked on the ground. That staked layout is your last easy chance to shift the line before posts are set.
Stage 3: Demo and post setting (day 1 of the build)
Any existing fence comes out, old post footings get broken and hauled, and we set the new aluminum posts in concrete footings sized to the panel. Posts need to cure before panels go on. For a typical backyard this is a one-day stage; a full perimeter with a front-yard run adds half a day.
Stage 4: Panels, gates, and rails (days 2 – 3)
Panels go up, rails get attached, and gates get hung and adjusted for swing and latch. If you’re adding a driveway gate or a self-closing pool gate, that’s a lengthier hang and alignment. You approve gate placement and latch height on the spot, before we finish the run.
Stage 5: Inspection and walkthrough (day 3 or 4)
We close out the permit, meet the inspector on site, and then walk the fence with you: post spacing, rail heights, gate operation, fasteners. Anything on that walk that needs correcting, we correct it. That’s the point of the 730-Day Done Right Promise: if it isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Choosing an Aluminum Fence Style: Options and Honest Trade-Offs
Aluminum gives you more choices than most homeowners expect. Here’s what actually goes into the decision.
- Residential-grade vs. heavy-duty commercial grade. Residential panels feel lighter and cost less; heavy-duty panels have thicker walls and larger posts. For most Westwood Lakes backyards, residential grade is plenty. If you’re fencing a pool area where kids and dogs push against it, the heavier grade is the better buy.
- Rackable vs. level panels. Rackable panels follow the grade of the ground; level panels stay horizontal and step with the terrain. Sloping lots here usually call for rackable, but if the yard is flat, level panels give a cleaner look.
- Powder-coat color. Black is standard and hides dirt; bronze and white are common alternates. A quality powder coat holds up far better to South Florida sun than painted steel, which is a real reason to choose aluminum over ornamental steel in this climate.
- Pickets and spacing. Standard pickets are spaced to meet pool-safety requirements in some cases. If the fence is around a pool, confirm the picket spacing and gate hardware against the code before ordering.
- Gate hardware. Standard latch, self-closing hinge, or a keyed entry. Decide early, because the gate hardware affects the post and header sizing.
We keep the finish package honest: what you see quoted is what gets installed, no mid-project upgrade swap.
What an Aluminum Fence Costs in Westwood Lakes, FL
Expect $4,000 – $10,000 for a complete aluminum fence installation in Westwood Lakes, with straightforward single-family yards on the lower half of that range and larger or gate-heavy runs at the top.
| Line Item | Typical Range in Westwood Lakes |
|---|---|
| Aluminum fence, standard 4 – 5 ft run | $3,500 – $7,500 |
| Larger or heavy-duty run, 6 ft | $6,000 – $10,000 |
| Driveway or pedestrian gate | $450 – $1,800 (hardware and post dependent) |
| Removal of old fence and footings | $300 – $900 |
Five things push the number up or down:
- Linear footage. A 100-foot backyard is a different job than a 250-foot perimeter. Footage is the single biggest factor.
- Height and grade. Six-foot runs in heavier gauge cost roughly 20 – 30% more per foot than standard four-foot residential panels.
- Existing concrete and hardscape. Posts set through an existing patio slab or wall cost more to break and drill than posts set in open grass.
- Gates and hardware. A driveway gate and a self-closing pool gate each add a real chunk of money and time.
- Permit scope and utility relocation. A permit is routine. Relocating a sprinkler zone or rerouting irrigation to fit a post line is not, and that gets quoted separately.
Our written estimate itemizes fence material, footage, gates, demo, and permit. What it won’t hide: if the inspector calls for a change, you hear it from us before the work happens, not after. No-hassle upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Westwood Lakes Homes Specifically Do to This Job
Westwood Lakes is a post-war subdivision where nearly every property is a rebuild, addition, or retrofit on a late-1950s-to-1970s lot, not new construction. That history changes aluminum fence work here in practical ways. The old CBS block walls and chain-link lines that mark many property lines are reaching the end of their useful life, and when an old fence comes out we inspect the footing and slab where the new posts land, because a fault under the concrete turns into a post-setting problem fast. The area’s low elevation and flood-zone rules mean we’re careful about drainage: a post footing that blocks a natural drainage path in a heavy-rain year can leave water pooling against the house. Strictly on the fence side, wind is the other factor. If the fence sits on an exposed run along a front setback, we spec heavier posts and set them deeper, because the frontal-wind requirements that apply here aren’t the sort of thing a $2,500 fence should ignore. On top of that, HOA rules in some of these communities dictate color and height, so we confirm the rules before the order goes out. This is the same care we bring to the fence installation services we offer throughout Westwood Lakes, and the same weather-beaten finish we track when clients pair a fence with a new Driveway Repair & Replacement in Westwood Lakes.
Serving Westwood Lakes, FL – Our Local Coverage Area
We serve Westwood Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Aluminum Fence in Westwood Lakes
Most Westwood Lakes aluminum fence jobs take two to four working days, plus permit processing time if the fence is in a permit-required location. The build itself is typically one day for post setting and one to two for panels, rails, and gates. Stacked with an inspection, plan for a week of calendar time from start to walkthrough. Call (844) 761-9356 for a firm timeline on your yard.
Most residential aluminum fence work in unincorporated Miami-Dade County requires a permit, and we pull it as part of the job. The scope covers the fence height and location. We handle the paperwork and the inspection scheduling so it doesn’t fall into your lap. Call us and we’ll confirm what applies to your specific lot before you commit.
Yes, and it’s the most common replacement scenario in Westwood Lakes. We remove the old fence and concrete footings, inspect the ground beneath, and set the new posts. That prep work is a separate line on the estimate, and skipping it is not an option we’ll quote.
An aluminum fence in Westwood Lakes typically costs $4,000 – $10,000, with most single-family yards around $3,500 – $9,000 depending on footage, height, gates, and demo. Call (844) 761-9356 for an exact quote. Estimates are free and itemized.
Our workmanship is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. Material warranties come from the panel and powder-coat manufacturer and are passed to you. We walk you through both on site before anything begins.
Get Your Free Aluminum Fence Estimate in Westwood Lakes
Call (844) 761-9356 and we’ll schedule an on-site visit. You’ll get the measure, a written itemized quote, and a firm timeline, usually within the same week. This is where a fence becomes part of a wider plan, too, from a Fence Installation in Westwood Lakes refresh to a Fence Installation project that pairs with new walkway pavers at Patios, Walkways & Pool Decks in Westwood Lakes. Free estimate, no pressure.
Written by the team at Groundwork Construction Co.