Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Three Lakes, FL: What the Job Actually Involves
Custom & geometric windows in Three Lakes, FL usually run $950 to $3,200 per opening, and a typical four-to-six window feature wall lands between $6,500 and $14,000 installed. The work covers arched, octagonal, trapezoidal, half-round, and radius-cut units – factory-built to your opening dimensions, not cut on site – with a lead time of roughly 8 to 14 weeks from template to final inspection. Call (844) 761-9356 and we’ll walk you through what your wall can actually take.
How We Build a Geometric Window Feature, Stage by Stage
These aren’t stock units pulled off a rack. Every geometric window is templated, manufactured to the opening, then craned or hand-carried into a hole that has to be framed to within a quarter inch. Here’s the real sequence.
Stage 1: Site survey and template (day 1, about two hours)
We measure the rough opening in multiple planes, check for plumb and square in a house that’s probably settled a little since the 1980s, and photograph the existing aluminum frames. On an arch or a trapezoid, the wall itself is the template. You decide the window shape and whether the unit is a fixed picture window or operable. This is also when we flag anything structural – a header that needs sistering, a stucco return that’s failing.
Stage 2: Design, product approval, and permitting (weeks 1 through 5)
Your unit gets specified to Miami-Dade High-Velocity Hurricane Zone ratings, not just Florida product approval. Geometric shapes have fewer tested assemblies than rectangles, so the manufacturer has to certify a wind-load and impact rating for that specific configuration. Once the spec sheet is locked, we file for the permit through Miami-Dade County. You approve the final drawing and the glass package here. This is the longest stretch and the one homeowners underestimate.
Stage 3: Fabrication (weeks 5 through 10)
The manufacturer builds your unit and ships it on your schedule, not theirs. We confirm delivery dates in writing and inspect the unit for shipping damage before it ever touches the wall. You don’t do anything this stage except stay reachable.
Stage 4: Demolition and installation (two to four days)
We protect the interior, pull the old aluminum unit, and check the framing and flashing before anything new goes in. Then comes the setting, shimming, and sealing – the flashing detail is where geometric windows live or die, because water follows a radius just as happily as a straight edge. Stucco patching happens the same day on the exterior return.
Stage 5: Inspection and finish (day 4 through day 7)
The county inspects the installation. We finish trim, caulk, and touch up the stucco. You walk the wall with us and sign off. Our technicians have up to 12 years of experience on this type of work, and every install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Options: Glass, Frame, and Shape – and Where the Money Goes
Most of the decisions on a geometric window come down to three things, and each one moves the price.
- Frame material: Vinyl handles a radius shape fine and is the most affordable, but the profile is thicker and limits how thin your sightlines get. Aluminum lets you build a narrower frame and is a natural fit for the existing aluminum openings in Three Lakes homes, though it conducts heat. Wood-clad aluminum gives you an interior wood look with an aluminum exterior – the premium choice, and priced accordingly.
- Glazing: Impact laminated glass is essentially mandatory here in the HVHZ. Low-E coatings and argon fill help with the intense South Florida sun, and you’ll feel it on a west-facing feature wall. Ask for the solar heat gain coefficient in writing, because a beautiful arched window that turns your living room into a greenhouse is a bad buy.
- Shape complexity: A rectangle in a custom size costs the least. An arch or half-round is next. A trapezoid, octagon, or a true radius matched to an existing header profile costs the most, because the manufacturer has to build and test a one-off assembly. Curved glass itself is a different price tier entirely – most homeowners choose a segmented arch built from straight glass panels instead.
- Operation: Fixed picture windows are the cheapest and the most weathertight. Operable geometry – an awning in an arch, a casement in a trapezoid – adds hardware and cost but gives you ventilation.
Andersen and Marvin both build to custom templates, and we spec from a curated set of manufacturers rather than whatever happens to be in stock, so the shape you want is the shape you get.
What Custom & Geometric Windows Cost in Three Lakes, FL
A single geometric opening in Three Lakes runs $950 to $3,200 installed, depending on shape and glass. A feature wall of four to six units runs $6,500 to $14,000. If the project is folded into a broader whole-house upgrade, a full window package including impact glazing typically lands in the $8,000 to $25,000 range.
Here’s what pushes a job toward the low versus high end:
- Opening condition: A straight rectangular opening with sound framing is the low end. If the header needs work or the stucco return is failing, that’s additional scope and you’ll see it line-itemed.
- Shape and glass tier: One fixed rectangle with impact glass is the floor. A radius matched to a Mediterranean arch in tinted laminated glass is the ceiling.
- Quantity: Per-unit cost drops as you add matching openings, because the design, permit, and mobilization are shared across the project.
- Permit scope: A single-opening permit costs less than a whole-wall or whole-house impact upgrade, and the county inspection schedule is the same.
- Access: A second-story window over a barrel-tile roof needs staging and careful handling, and that’s real labor.
Every written estimate lists the unit, the glass, the flashing, the stucco patch, the permit, and the inspection line by line. No-hassle upfront pricing means the number you see is the number you pay, backed by 0% financing for 18 months and $1,000 off projects over $10,000. What’s not automatically included: structural framing repairs, interior drywall refinishing beyond the opening, and any HOA architectural review fees.
See the difference
Before
After
Before
After
Before
AfterWhat Three Lakes Homes Specifically Do to This Job
Three Lakes is a built-out 1980s-to-1990s pocket of western Kendall, ZIP 33186, and almost nothing here is ground-up new construction anymore. That changes the job completely. The housing stock is concrete block with stucco, barrel-tile roofs, and single-pane aluminum-frame windows that are now 30-plus years old and past their service life. When we set a geometric feature into one of these homes, we’re usually cutting into a wall that’s settled a little, chasing an original aluminum frame, and matching a stucco texture that’s faded unevenly across the elevation.
Permitting runs through Miami-Dade County’s post-Surfside recertification and product-approval regime, and the HVHZ rules govern the wind rating on every unit. Staging is tight on the HOA villa lots, so we plan deliveries and inspections around a driveway and a gate, not a jobsite. On re-roof-and-window projects, neighbors on the same street often move in clusters after a named storm, which means the inspection calendar fills up. If your project touches the driveway while you’re at it, homeowners often pair this with Concrete Driveways & Concrete Work in Three Lakes or Asphalt Driveways & Resurfacing in Three Lakes, since the equipment’s already there. And if the window work is really part of a full Windows & Doors in Three Lakes upgrade, we’ll scope it together.
Serving Three Lakes, FL – Our Local Coverage Area
We serve Three Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Three Lakes
Eight to fourteen weeks is realistic, and most of that is fabrication and permitting, not installation. The install itself is two to four days per opening. Call (844) 761-9356 and we’ll give you a timeline against your actual opening.
Yes – any window change in the Miami-Dade HVHZ requires a permit and a product approval for that specific configuration. We pull the permit and pass the inspection as part of the job. Call us to confirm what your HOA also requires.
Usually yes, but an arch or trapezoid often needs a header adjustment to fit the shape cleanly. We find that out at the day-one survey, before you’ve committed to anything. Call (844) 761-9356 for a free on-site estimate.
Plan on $950 to $3,200 for a single opening, or $6,500 to $14,000 for a full feature wall. Shape complexity and glass tier are the biggest levers. Call us for an exact quote – estimates are free.
Every install is backed by our 730-Day Done Right Promise on workmanship, on top of the manufacturer’s product warranty. That’s one of the longest workmanship guarantees in the residential market. Call (844) 761-9356 to get it in writing.
Get a Free Estimate on Custom & Geometric Windows in Three Lakes
If your Three Lakes home is ready for a window that isn’t a rectangle, start with a free on-site estimate. We’ll survey the opening, tell you what shape your wall will actually take, and hand you a written line-item quote for Windows & Doors work in Three Lakes. A live person answers (844) 761-9356, 24/7 – no voicemail, no waiting until Monday.
Written by the team at Groundwork Construction Co.