Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Kendale Lakes, FL: What It Costs and How Long It Takes
A tub-to-shower conversion in Kendale Lakes runs $3,500 to $10,000 for most homes in 33183, and a standard conversion takes 5 to 10 working days from demo to final inspection. The job means pulling the tub, reworking the drain and valve to shower position, waterproofing the walls and pan, setting new tile or a prefab surround, and passing Miami-Dade inspection before the glass goes in. Call (844) 761-9356 for a free on-site estimate.
How the Conversion Actually Runs, Stage by Stage
Every tub-to-shower job we do in Kendale Lakes follows the same sequence. The order matters more than the speed, because the waterproofing stage is where cheap conversions fail two years later.
Stage 1: Demo and drain work (day 1)
We pull the tub, strip the surround down to studs, and cut the drain and valve over to shower position. Most Kendale Lakes homes have the tub drain set at one end, so the drain almost always moves. This is also when we open the wall to check what’s behind the tile, which on a 1970s CBS home sometimes means old galvanized supply lines that should be replaced while the wall is open.
Stage 2: Framing and rough-in inspection (days 2 – 3)
New blocking goes in for grab bars and a bench if you want one, the valve gets set to the height you picked, and the rough plumbing gets inspected. This is the inspection you can’t skip in unincorporated Miami-Dade. You’ll want to have your fixture finish and valve brand decided before this stage, because swapping later means reopening the wall.
Stage 3: Waterproofing (days 3 – 4)
We install a bonded waterproofing membrane over cement board and a sloped, pre-formed pan. This is the single most important stage, and it’s the one we never rush. A pan that holds water instead of draining to the weep holes turns into a mold problem behind your new tile.
Stage 4: Tile and finish (days 4 – 6)
Wall tile, floor tile, grout, and niches go in here. Large-format tile over a flat wall goes faster; small mosaic or a herringbone pattern adds a day or two of labor. Final plumbing trim and the drain grate close out this stage.
Stage 5: Glass, inspection, and walkthrough (days 6 – 10)
We hang the glass enclosure or shower door, run the water test, and walk the final inspection. You get a punch list and a walkthrough before we call the job done. Glass lead time is the one wildcard that can push this stage out, so we order it in stage 1.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change the Job
Most of your decisions come down to four things: how you waterproof, what you tile in, how big you go, and what you do about the glass. Here’s the honest trade-off on each.
- Bonded membrane vs. cement board with liquid waterproofing. A bonded sheet or roll-on membrane (Schluter, RedGard) costs more up front but is the standard we recommend. Cement board alone with no membrane is cheaper and is where most leak failures start.
- Porcelain tile vs. natural stone. Porcelain is the workhorse for a Kendale Lakes shower – it handles the humidity, needs almost no sealing, and runs $4 to $12 per square foot installed. Natural stone (marble, travertine) looks warmer but needs sealing every year and will etch in a shower.
- Tile-in shower vs. prefab surround. A prefab acrylic surround is faster and cheaper, but it locks you into a fixed size and shows scratches. A tiled shower suits the CBS ranch homes here and holds resale better, but adds labor days.
- Frameless glass vs. semi-frameless. Frameless is the cleaner look and roughly $600 to $1,400 more than semi-frameless. We work with Mr-Glass and ViewLux enclosures so you’re choosing from a known lineup, not a catalog photo.
- Curbless vs. curbed pan. A curbless, walk-in pan drains better and removes the trip hazard, but requires recessing the floor or raising the shower, and it’s not possible on every slab. We tell you at the estimate whether your floor allows it.
What Tub-to-Shower Conversion Costs in Kendale Lakes, FL
The realistic range for a tub-to-shower conversion in Kendale Lakes is $3,500 to $10,000. A straight swap with a prefab surround and semi-frameless glass lands near the bottom. A fully tiled, curbless shower with frameless glass and a bench lands near the top. A whole-bathroom scope sits well north of that, which is why the wider project often gets priced as part of Bathroom Remodeling in Kendale Lakes.
Five things move the number:
- Size. A standard 30×60 alcove conversion is the baseline. A larger footprint or a layout that changes the shower orientation adds tile square footage and labor.
- Condition behind the wall. Old galvanized supply lines, water damage, or a rotted subfloor, all common in 1970s-90s stock, add removal and repair time.
- Relocating the drain or valve. Moving plumbing to shower position is standard. Moving a wall or relocating the whole shower is not, and it’s where jobs jump in cost.
- Material grade. Porcelain vs. stone, frameless vs. semi-frameless glass, and a niche or bench all stack up.
- Permit scope. A conversion with plumbing changes requires a permit and inspections. That’s a real line item, and we never hide it.
Your written estimate breaks out demo, rough-in, waterproofing, tile, glass, and permit fees line by line. It does not include things we can’t see until the wall is open, like hidden rot or a failing subfloor. If we find one, we tell you before we touch it. That’s the no-hassle upfront pricing we build every job on, and it’s part of the 730-Day Done Right Promise – if it’s not done right, we make it right. Our bathroom remodeling service runs on the same terms across the board.
See the difference
Before
After
Before
After
Before
AfterWhat Kendale Lakes Homes Specifically Do to This Job
Kendale Lakes is a build-out, post-1970s Kendall subdivision. Nearly every job here is a remodel on a fully developed lot, not a new build. That means the work we do in 33183 is redoing Kendall, not building it. The homes are mostly 1970s-90s single-family CBS ranch homes – concrete block and stucco, flat or low-pitch roofs, screened lanais, attached garages – and most are now 30 to 50 years old. That age shows up in the shower. We open the wall and find galvanized supply lines, a tub drain that’s been patched, or a cement board that was never waterproofed. The humidity does the rest.
The permit side matters here too. Miami-Dade’s post-Andrew product approval rules and post-Surfside structural requirements shape nearly every project in this ZIP, so a plumbing change on a tub-to-shower conversion needs a permit and an inspection. We pull both. It’s also why we see so many half-finished DIY conversions: a homeowner starts the demo, hits a code requirement, and stops. If your wider plans include a new shower and new windows facing the weather, homeowners often pair this with impact window work; when they’re redoing the exterior, homeowners often pair it with Metal Roofing in Kendale Lakes or Tile Roofing in Kendale Lakes. We cover Kendale Lakes and the surrounding Kendall communities, including Kendall West, The Crossings, Three Lakes, and Country Walk, on the same schedule.
Serving Kendale Lakes, FL – Our Local Coverage Area
We serve Kendale Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in Kendale Lakes
Most conversions take 5 to 10 working days. Demo and rough-in take the first two to three days, waterproofing and tile take three to four, and glass and inspection close out the last two. Custom glass with a long lead time is the most common reason a job runs long, which is why we order it on day one.
Yes, if the plumbing changes – and it almost always does, because the drain and valve move to shower position. Miami-Dade requires the rough-in and final to be inspected, and we pull the permit and schedule both. Skipping it can stall a future sale or an insurance claim.
Sometimes. If the existing drain and valve can be reused in place, we can skip the rough-in and save a few hundred dollars and a day. On most Kendale Lakes homes the tub drain sits at one end of the alcove, so it does move. We confirm this on the first walkthrough.
Expect $3,500 to $10,000 depending on size, material grade, glass, and whether plumbing has to move. A prefab surround with semi-frameless glass sits near the low end; a fully tiled curbless shower with frameless glass sits near the high end. Call (844) 761-9356 – estimates are free and the written quote is itemized.
Every conversion we do is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the waterproofing, tile, plumbing, and glass install. Our technicians have up to 12 years of experience, and they’re background-checked and arrive in uniform.
Get a Free Estimate for Your Kendale Lakes Tub-to-Shower Conversion
We’ll come to your home in Kendale Lakes, measure the alcove, check what’s behind the wall, and give you a written, itemized estimate for the tub-to-shower conversion – usually within a few days of the call. You’ll know the total before we start, and the number won’t change unless we find something and tell you first. Call (844) 761-9356 to schedule. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.