Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in The Crossings, FL: Answer First
A tub-to-shower conversion in The Crossings, FL typically runs $3,500 to $10,000 and takes 3 to 7 working days once the permit clears Miami-Dade County. The job means pulling the old tub, reconfiguring the drain and valve to a shower position, waterproofing, setting a new base and walls, and finishing with glass. It isn’t a weekend swap: the permit review and inspection add real time. Call (844) 761-9356 for a free on-site estimate before you buy anything.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Most quotes skip the sequencing. Here’s what actually happens in a The Crossings home, in order.
Stage 1: On-site measure and decisions (about 60 to 90 minutes)
We measure the alcove, check the existing drain location, confirm the valve brand and condition, and record the wall substrate. You decide the base type, wall material, and whether the valve gets replaced while the wall is open. Doing the valve now costs less than tearing the wall again in two years.
Stage 2: Permit filing (1 to 3 weeks)
Any conversion that moves plumbing, changes the drain, or adds electrical work needs a permit through Miami-Dade County with the City of Miami portion for this community. If the valve and drain stay put and only the surround changes, many of these are still flagged because the drain assembly changes. We pull it and schedule the rough inspection. This is the wait most homeowners don’t budget for.
Stage 3: Demo and rough-in (1 to 2 days)
The old tub comes out. If it’s a cast-iron tub, add a half day and a two-person carry. We open the wall at the valve, set the new drain and P-trap to code, reframe any soft studs we find, and replace the cement board. Rough inspection happens here.
Stage 4: Waterproofing and setting (2 to 3 days)
This is the stage that decides whether the shower lasts. We install a bonded waterproof membrane and a sloped pre-formed pan or a mud bed, then flood-test. Tile or solid-surface panels go up after the pan passes. Cure time between setting and grouting is real – we don’t rush it.
Stage 5: Valve trim, glass, and final inspection (1 to 2 days)
Valve cartridge and trim, showerhead, glass door, caulk, and the final inspection. Your decisions here are finish and trim only; everything structural was locked in at Stage 1. Then we walk it with you and hand over the 730-Day Done Right Promise in writing.
If the shower is part of a larger project, this usually runs alongside a full Bathroom Remodeling in The Crossings scope so the plumbing and inspection get done once.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Every decision below has a real trade-off. Here’s how we frame them so you’re not guessing.
- Acrylic base and wall kit: The lowest-cost route, usually the bottom of the $3,500 to $10,000 range. Fast to install, easy to clean, holds up well. The trade-off is it looks like a kit, and a heavy drop can crack a base over 15 years.
- Tile over a waterproofed pan: More design range, more durable in the long run, adds roughly $1,500 to $3,500 to the job. The trade-off is grout maintenance and a longer install. If you’re picking a tile, a KraftMaid-adjacent vanity in a complementary finish is the usual pairing; Wellborn also works if you’re choosing cabinetry at the same time.
- Solid-surface panels (cultured marble, solid slab): Middle ground. No grout lines, quick to set, hides the seams well. Trade-off is limited color range and a higher material cost than acrylic.
- Base type – pre-formed vs. mud-set: Pre-formed pans are faster and consistent. A mud-set pan lets you level a floor that’s out of tolerance and is more forgiving in older homes. Mud-set adds time.
- Glass – framed vs. frameless: Framed glass is the lower-cost choice. Frameless looks better and cleans easier, but it’s a heavier install and the door has to be sized precisely. Expect it in the upper half of the range.
- Valve replacement: If the existing valve is original to the tub, replacing it now is the right call while the wall is open. It adds cost but avoids a second tear-out.
What Tub-to-Shower Conversion Costs in The Crossings, FL
The honest number: $3,500 to $10,000 in The Crossings, FL. A straightforward like-for-like conversion with an acrylic kit sits near the bottom. Tile, frameless glass, and a valve replacement push toward the top.
What moves the number:
- Alcove size: A standard 60-inch alcove is the cheapest. An odd width means custom pan or tile work, which adds cost.
- Existing condition: Soft studs, a rotted subfloor, or a drain that isn’t where it should be each add a line item. In 30-year-old The Crossings homes this is common, not rare.
- Plumbing changes: Moving the drain or relocating the valve means rough-in work, a longer permit scope, and a rough inspection.
- Material grade: Acrylic at the low end, tile and slab at the high end. Glass type follows the same logic.
- Permit scope: A plumbing-only permit is straightforward. Adding electrical or structural work expands the review.
A written estimate from us is line-item and fixed: the number you see is the number you pay, and no change orders for things we should have caught at the measure. What it doesn’t cover is anything we can’t see until demo – hidden rot or a surprise drain issue – which we flag with photos and a price before touching it. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat The Crossings Homes Do to This Job
The Crossings is a master-planned Kendall subdivision built almost entirely in the late 1980s and 1990s within ZIP 33186, on concrete block and stucco homes with tile roofs and attached garages. That build era matters here: the original tub surrounds and valves are 30-plus years old, so a conversion in this community is almost always an original-fixture removal, not a second remodel. We see the same failure modes repeatedly – a valve cartridge that’s seized, cement board that’s gone soft behind the tile, and the tub drain flange rusted to the point where it has to be cut out.
Permitting runs through Miami-Dade County with the City of Miami for this community, and because The Crossings is a fully built-out, The Crossings association-governed tract, any exterior change also needs architectural review. That’s the combination you don’t get in the unincorporated or newer pockets around it. The exterior review matters less for a showroom conversion than for a roof or window job, but if you’re adding a vent or changing a window for the shower, that review kicks in. Homeowners often pair this work with Tile Roofing in The Crossings or Metal Roofing in The Crossings since both come up in the same age-and-insurance conversation. The subtropical heat and summer rain also mean we schedule the demo and setting stages around the June-November wet season so the waterproofing cures without a moisture problem. We handle this job as a focused Bathroom Remodeling scope, not a full build.
Serving The Crossings, FL – Our Local Coverage Area
We serve The Crossings and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in The Crossings
Three to seven working days of construction, plus one to three weeks for the permit. The install itself is fast; the permit review through Miami-Dade County is the wait. Call (844) 761-9356 to confirm the timeline for your address.
Yes, in almost every case. Changing the drain assembly, moving the valve, or adding electrical work triggers a plumbing permit and a rough and final inspection. We pull it and schedule the inspections – it’s part of the line-item estimate, not a surprise add-on.
Often, yes. If the drain and valve stay in place and the alcove is a standard 60-inch width, the job stays simple and sits near the $3,500 end. If the drain moves or the floor needs a mud-set pan, the scope grows. Call (844) 761-9356 and we’ll tell you which you have.
Between $3,500 and $10,000. Acrylic kits land low; tile, frameless glass, and a valve replacement land high. Hidden rot or a relocated drain adds cost. Call (844) 761-9356 for an exact quote – estimates are free and line-item.
The 730-Day Done Right Promise covers every tub-to-shower conversion we complete. If it’s not done right, we make it right. Manufacturer warranties on the base, wall panels, and glass run on their own terms; we’ll walk you through what covers what before you sign.
Get a Free Estimate for Your Tub-to-Shower Conversion in The Crossings
Call (844) 761-9356 to book a free on-site estimate. We’ll measure the alcove, check the valve and drain, and hand you a line-item price with the permit cost broken out. You’ll know the real range before you commit. A live person answers the phone around the clock, and every job carries the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.