Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a Sliding & Patio Doors job in Kendall actually involves
Replacing Sliding & Patio Doors in Kendall usually takes two to four days from demolition to final inspection, and runs $2,800 to $9,500 per opening depending on frame material, glass package, and whether the rough opening has to be re-framed. That number covers removal, disposal, Miami-Dade product-approval documentation, installation, and water testing. Call (844) 761-9356 for a free on-site estimate and a written line-item quote before anything gets ordered.
How the work unfolds, day by day
The sequence matters more than the brochure photos. Here’s what you’ll see.
Day 1: Measure and verify. We confirm the rough opening, check the header and framing for rot or termite damage, and photograph the existing sill pan. On 1970s concrete block homes we pay particular attention to how the door was originally flashed into the CBS wall – many have no sill pan at all, just caulk over a threshold. That’s a decision point for you: budget for proper flashing now, or accept that the new unit may leak at the sill within five years. This visit takes about two hours.
Day 2: Order and permitting. We submit the permit package to Miami-Dade County and order the unit. Lead time on sliding and patio door units typically runs three to six weeks, longer for custom colors or Therma-Tru or ViewLux specialty configurations. This is also when you finalize the glass package and screen type. You’ll get a copy of the product approval numbers before anything ships.
Day 3: Demolition. The old door comes out, the opening gets cleaned back to framing, and we inspect for hidden damage. On homes along Kendall Drive and the older tracts, we routinely find rotted sill plates where the original installation lacked a proper pan – replacing that plate adds a half-day and usually a few hundred dollars in lumber. You’ll see the photos before we proceed.
Day 4: Install and finish. New unit set, shimmed, anchored, flashed at the sill and jambs, insulated in the cavity, and sealed. We hang the panels, adjust the rollers, and test the lock and screen. Interior trim and stucco patching usually finish the same day. You decide at this stage whether you want a standard interior casing or a drywall return – the second looks cleaner on modern interiors but costs a bit more in labor.
Day 5: Inspection and walkthrough. The county inspector signs off, and we walk the door with you: panel alignment, lock engagement, water test results, and care instructions. If anything needs adjustment, we handle it before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What you’re choosing between on a sliding or patio door
The decisions break into four areas, and each one moves the price.
- Frame material. Vinyl is the budget pick and holds up fine in air-conditioned interiors, but it expands and contracts more than aluminum in direct sun. Aluminum with a thermal break is the value sweet spot for covered patios. Wood-clad – Therma-Tru and similar – looks best on the interior side and costs 30 to 50 percent more. On Kendall’s salt-laden air, we favor corrosion-resistant finishes and hardware regardless of frame choice.
- Glass package. Clear single-pane is a code problem now. You’ll be choosing between impact-rated laminated glass, impact with low-E coating, and impact with low-E plus argon fill. Low-E matters here because west-facing doors in Kendall pick up brutal afternoon heat. Expect $400 to $900 more per door for the upgraded coating, and ask your installer whether the unit is NOA-approved for large-missile impact, which is the HVHZ standard.
- Configuration. Standard two-panel sliders, three-panel with a fixed center, and multi-slide systems that stack or pocket into a wall. Multi-slide is beautiful and expensive – $9,000 to $18,000 for a wide opening – and it needs a proper structural header. A two-panel slider is the workhorse for most Kendall homes.
- Screen and hardware. Standard fiberglass screen, pet screen, or retractable. Stainless rollers and lock sets cost more but survive coastal humidity far longer than plated steel. We default to stainless on anything within a few miles of the coast, which includes most of Kendall.
What Sliding & Patio Doors cost in Kendall, FL
Most single slider replacements in Kendall land between $2,800 and $6,500 installed. Wide multi-slide or wood-clad units push to $9,500 and beyond, and if the opening has to be re-framed or the header replaced, add $1,200 to $3,500.
The variables that move the number:
- Size and panel count. A standard 6-foot two-panel door is the baseline. Every extra panel adds roughly $800 to $1,500.
- Existing condition. Rotten framing, missing sill pan, or damaged stucco adds a day and a few hundred to over a thousand dollars depending on extent.
- Glass package. Impact-only versus impact with low-E and argon, $400 to $900 difference.
- Frame material. Vinyl on the low end, aluminum thermally broken in the middle, wood-clad at the top.
- Permit scope. A straight replacement is a simple permit. Enlarging the opening, adding a header, or converting a window to a door is a structural permit with engineering, and that adds $800 to $2,000 in fees and design time.
A written estimate from us includes removal, disposal, the unit itself, flashing, insulation, sealant, trim, permit, and inspection coordination. It typically does not include interior painting, flooring patch beyond the threshold, or HOA architectural review fees if your community requires them. If your project grows into a broader envelope upgrade, this fits into a full Windows & Doors in Kendall scope.
See the difference
Before
After
Before
After
Before
AfterWhy Kendall homes are hard on sliding and patio doors
Kendall is a fully built-out corner of unincorporated Miami-Dade west of the Turnpike, and that shapes every door job here. The housing stock is mostly 1970s-to-1990s concrete block and CBS, which means we’re almost never cutting into new framing – we’re rebuilding what’s already there. Salt-laden air off the coast and year-round humidity corrode steel rollers, hinges, and fasteners years faster than inland, and it attacks the caulk line at the sill first. We see doors that were installed in the 1990s with plated steel rollers and no sill pan, and by the time the homeowner calls us, the track is pitted and the threshold is soft.
The paperwork reality matters as much as the carpentry. Miami-Dade County permitting and NOA product approvals drive the schedule here, and the 40-year recertification and post-Andrew HVHZ code environment mean every unit has to carry the right approvals for windborne debris. When you’re comparing bids, ask for the product approval number before you discuss price – if a contractor can’t produce it, the door won’t pass inspection. We pull the permit on every door we install and coordinate the inspection ourselves. If your home is in one of the tract neighborhoods near Kendall Drive or the older CBS streets off 33176, you’ve probably also seen the soffit and fascia wear that comes with the same salt air, and homeowners often pair a door replacement with Fence Repair in Kendall while we’re already on site.
For the wider exterior scope, see our Windows & Doors service, and for the full range of what we handle across Kendall, that page covers it. If you’re redoing the approach to the door, Paver Driveways in Kendall is a job we also run in these neighborhoods.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Sliding & Patio Doors in Kendall
Most replacements take four to six weeks from contract to final inspection, with two to four days of actual on-site work. The bulk of the timeline is permitting and lead time on the unit itself. Call (844) 761-9356 and we can walk through a realistic schedule for your door.
Yes. Miami-Dade County requires a permit for any exterior door replacement, and the unit must carry an HVHZ product approval for impact. Skipping the permit creates a problem when you sell or insure the home. We pull the permit and coordinate inspection on every job.
In most cases, yes. A straight replacement reuses the existing rough opening, so no plumbing or electrical work is needed. If you want a wider opening or a different configuration that requires a new header, that becomes a structural permit and adds time and cost.
Not on a fixed-price agreement unless we discover hidden damage behind the wall. We photograph anything we find before proceeding, and we don’t start extra work without written approval. The number on your estimate is the number you pay.
Every installation is covered by our 730-Day Done Right Promise, and the unit itself carries a manufacturer warranty that varies by brand. We hand you both in writing at the walkthrough. Call (844) 761-9356 for details specific to the unit you’re considering.
Get a free Sliding & Patio Doors estimate in Kendall
We’ll come out, measure the opening, check the framing and sill condition, and give you a written line-item quote with the product approval numbers attached. No pressure and no vague ballpark. Call (844) 761-9356 to schedule your free estimate for Sliding & Patio Doors in Kendall – a real person answers, day or night. Our technicians have up to 12 years of experience, and every job is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.