Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Richmond Heights, FL: What It Actually Takes
Patios, walkways and pool decks in Richmond Heights, FL typically run $3,500 to $11,000 for a paver patio and are usually completed in one to two weeks, weather permitting. Walkways and pool deck resurfacing can push a combined project higher, especially on the post-war slab lots and new infill builds found throughout the 33176 ZIP code. Call (844) 761-9356 for a free on-site estimate and a written line-item quote before any work begins.
How We Build a Patio, Walkway or Pool Deck Here, Stage by Stage
Outdoor hardscape work is not a single pour or a single day. It moves through five stages, and each one has a decision attached to it. Here is the real sequence we follow on Richmond Heights projects.
Stage 1: Site Assessment and Layout (Day 1)
We walk the property with you, measure the actual usable space, and check how water drains away from the house. On the limestone-heavy lots common in Richmond Heights, that means probing where rock sits under the proposed footprint before we promise a depth. You decide the footprint, the edge shape, and whether the deck ties into an existing patio or starts fresh. This stage takes a few hours, not days.
Stage 2: Demo, Excavation and Base Prep (Days 1 – 3)
Old concrete, worn pavers or root-bound turf comes out. We excavate to the depth the finish requires and build a compacted base with proper slope away from the slab. On Richmond Heights slab ranch homes that have settled or been added onto, we frequently find shallow limestone that has to be broken before we can grade. That breaking adds a day in some yards.
Stage 3: Drainage, Edging and Sub-Surface Rough-In (Days 2 – 4)
With South Florida’s summer downpours, drainage is the stage that decides whether your patio is usable in August. We set perforated drainage, tie in downspout discharge, and install paver edging or a concrete curb to lock the field. You decide here whether a French drain or a simple swale fits the yard. Any pool-deck plumbing or electrical that needs relocation is flagged now, before surfaces go down.
Stage 4: Finish Installation (Days 4 – 8)
Pavers go down on the compacted base with polymeric joint sand, or poured concrete is formed, poured and finished. Walkways, borders and step risers are set at the same time so grades stay consistent from the back door to the pool edge. This is where finish choice shows up in the schedule: patterned pavers take longer than a broom-finished slab.
Stage 5: Sealing, Cleanup and Final Walkthrough (Days 8 – 10)
We clean joints, apply sealer where you chose it, and walk the finished surface with you. You get a written note of the drainage slope and any maintenance timeline. Most residential patios, walkways and pool decks wrap in roughly one to two weeks, with larger pool decks running toward the top end. Everything is covered by our 730-Day Done Right Promise; if it isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Every patio, walkway or pool deck in Richmond Heights comes down to a handful of real choices. Each has a trade-off, and we tell you what it is up front.
- Concrete pavers (Belgard and similar lines): the most forgiving surface for Richmond Heights’ shifting limestone base. Individual units can be lifted and reset if the ground moves. Higher material cost, but repair-friendly, which suits our soil. Our paver patio installation range is $3,500 to $11,000 depending on size and pattern.
- Poured and stamped concrete: lower cost and quick to place, and it can mimic stone or brick. The trade-off is that hairline cracks show over time on ground that shifts, and repair means patching rather than resetting. Good for walkways and simple patio shapes.
- Travertine or natural stone: cooler underfoot for a pool deck, which matters through a South Florida summer. It costs more and needs a firm base, so it’s a stronger fit on new infill lots than on older settled slabs.
- Pool deck resurfacing: for an existing deck that’s sound but tired, a textured acrylic or paver overlay refreshes the surface without a full tear-out. It’s a budget-conscious option, but only when the underlying deck is structurally sound.
- Walkway width and edge detail: a 36-inch walkway handles traffic to the front door; 48 inches feels generous and lets two people pass. Banding and border courses add material and labor but hold up visually longer.
Finish and pattern matter as much as material; a simple running-bond paver field costs less than a complex European or herringbone layout. James Hardie siding and trim often come into the conversation when a patio ties into a screened enclosure or a covered addition, since the finish should match the home’s new exterior work.
What Patios, Walkways & Pool Decks Cost in Richmond Heights, FL
Plan on roughly $3,500 to $11,000 for a paver patio in Richmond Heights, and expect the total to climb as square footage, finish quality and site conditions change. Here’s what pushes a job toward the low or high end.
- Size and shape: a small 200-square-foot patio sits at the bottom of the range; a large pool deck with curves and multiple levels lands near the top.
- Existing condition: demo of old concrete or pavers, root removal and base repair all add labor. A clean, already-graded yard is the cheapest starting point.
- Rock and drainage: shallow limestone that must be broken, or drainage that requires a French drain, adds cost. This is a real variable on older Richmond Heights lots.
- Material grade: standard concrete pavers are the value pick; travertine, natural stone and complex patterned layouts move toward the high end.
- Scope of related work: relocating pool plumbing or electrical, tying into a new screen enclosure, or repairs that surface during demo all change the number.
A written estimate from us lists line items for demo, base prep, drainage, material, installation and sealing, so you can see where the money goes. What it typically doesn’t include without a separate line: relocating pool equipment, major structural repairs, and landscape replacement around the finished surface. Our pricing is upfront with no surprises; the number you see is the number you pay. This work pairs naturally with Full Kitchen Remodeling in Richmond Heights when a homeowner is updating the whole property at once.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond Heights Homes Specifically Do to This Job
Richmond Heights is one of South Florida’s historically Black communities, and its construction identity shows in the housing stock: mid-century concrete block ranch homes on post-war slabs, often with terrazzo or tile floors and many updated with additions or a second story. That mix of original 1950s – 70s houses and newer infill builds means crews here have to be as comfortable tying into an older slab as they are building new structural work. The limestone bedrock sits close to the surface across the Redland ridge, so excavation for a patio or pool deck can hit rock sooner than it would in neighboring Kendall or Pinecrest, which changes the base prep stage. The high water table and frequent summer downpours make drainage the deciding factor for anything near the house, and hurricane code compliance shapes how we anchor and slope exterior structures. That’s why we check the yard and the existing slab before we quote, and if the wider project scope extends to paving and site concrete, it’s part of a full Driveway & Pavers in Richmond Heights conversation.
Serving Richmond Heights, FL – Our Local Coverage Area
We serve Richmond Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Patios, Walkways & Pool Decks in Richmond Heights
Most projects take one to two weeks from start to finish, weather permitting, and larger pool decks run toward the longer end. Call us for a schedule based on your actual yard and finish choice.
Patios and walkways at grade usually don’t need a permit, but pool decks, structural changes and anything tied into an enclosure often do. We tell you exactly what your project requires and pull the permits the job needs, with inspections passed before we call it done.
Yes in most cases, and that’s the lower-cost path since it avoids demo and re-routing. If pool plumbing or equipment sits in the footprint, we flag it during the site assessment and price the relocation separately so there are no surprises. Homeowners often pair this work with ADU Site Prep & Utilities in Richmond Heights when the yard is already being torn up for utilities.
Paver patios run about $3,500 to $11,000 here, with pool decks and premium finishes landing higher. Call us for an exact quote; estimates are free and written line-item, so you can see the material, drainage and labor line by line.
Every hardscape project we install is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Our technicians have up to 12 years of experience on outdoor construction. Call (844) 761-9356 to start your free estimate, and a live person answers around the clock.
Get a Free Estimate on Patios, Walkways & Pool Decks in Richmond Heights
Call (844) 761-9356 and a live person picks up, any hour, any day. We’ll ask about your yard, your finish preference and your timeline, then schedule a free on-site estimate for your patio, walkway or pool deck in Richmond Heights. You get a written line-item quote, honest answers about drainage and rock, and clear next steps. Our driveway & pavers service and the rest of our work across Richmond Heights are built on the same upfront pricing and the same 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.