Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Tamiami, FL: What It Runs and How Long It Takes
Metal roofing in Tamiami typically runs $17,700 to $47,200 for a full installation, and most single-family homes here land in the $20,000 to $32,000 range once tear-off, Miami-Dade product approval, and wind-load fastening are included. Plan on 5 to 12 working days from tear-off to final inspection, with the longest wait usually coming from the permit office, not the crew. Call (844) 761-9356 to schedule a free on-site estimate and we’ll give you a written line-item number instead of a ballpark over the phone.
What the job looks like from tear-off to final inspection
Metal work on a Tamiami block home moves in a sequence, and each stage has a decision only you can make. Here’s the honest order.
Stage 1: Inspection and permit drawings (3 to 10 days before work starts)
We get up on the roof and check the decking, the existing underlayment, and how the 1970s-80s concrete-block structure is holding up around the penetrations. Then the drawings go to Miami-Dade for a permit, and this is the part that eats calendar time, not labor. At this stage you decide the panel profile, the color, and whether we’re adding a radiant barrier or upgraded underlayment. Call (844) 761-9356 once you have those choices narrowed and we’ll finalize the scope.
Stage 2: Tear-off and deck inspection (1 to 2 days)
Old shingles or barrel tile come off, and the deck gets a hard look. On a block home off SW 8th Street, we’re watching for soft sheathing and any past work a previous owner left unpermitted. You’ll approve deck replacement on the spot if we find rot, because a metal roof is only as good as what it’s screwed into. We don’t want surprises either, so this gets priced into the estimate as a per-sheet allowance where we can.
Stage 3: Underlayment and flashing (1 to 2 days)
Peel-and-stick underlayment goes down first, especially along the valleys and around the Florida-room tie-ins where we see the most intrusion. Flashing and drip edge go in next, and this is where a metal roof either lasts 40 years or leaks in year two. Miami-Dade wind requirements mean every fastener and every edge detail is looked at twice.
Stage 4: Panel installation (2 to 4 days)
Panels go on in runs, screwed down to the wind-load schedule the engineer specified, not a generic pattern. This is a two or three person job over 2,000 square feet, and the noise is real, so plan to be out of the house during the day. You’ll see the roof take shape here and confirm the color reads the way you wanted before we close it up.
Stage 5: Trim, penetration sealing, and final inspection (1 to 3 days)
Ridge caps, vents, and pipe boots get finished, then Miami-Dade inspection signs off. We walk it with you at the end and hand over the paperwork, which matters for insurance and for any future 40-year recertification on the structure.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Metal roofing is not one product. What you pick here moves the price by several thousand dollars and changes how the roof handles salt air and summer sun.
- Standing seam vs. exposed fastener panels. Standing seam hides the fasteners and holds up better over 30-plus years, but costs more per square foot. Exposed-fastener panels (the 5V crimp style) are cheaper and fine on a shed or carport, but the washers work loose over time, and in Tamiami’s humid, salt-laden air that means maintenance.
- Galvalume vs. painted steel vs. aluminum. Aluminum resists salt corrosion best, which matters near the coast. Painted steel gives you the widest color range. Galvalume is a workhorse but shows fingerprints and stains more.
- Kynar 500 finish vs. standard paint. The premium finish holds color in intense sun far better. Standard paint fades faster on a south-facing slope.
- Radiant barrier vs. basic underlayment. A radiant barrier knocks down attic heat and helps your AC bill through June-November. It’s worth the upcharge on a home with a vented attic.
- Concealed fastening on a low-slope section. Some Tamiami ranch homes have low-slope carport or Florida-room tie-ins where the panel profile has to change. That gets called out separately.
What Metal Roofing costs in Tamiami, FL
We quote metal roofing in Tamiami between $17,700 and $47,200, and the spread comes down to five things, not sales talk.
- Roof size and pitch. A 1,200-square-foot footprint sits near the low end; a larger two-story home near $40,000-plus.
- Existing condition. Deck rot, an old unpermitted Florida-room enclosure, or layers of prior roofing add demo and repair time.
- Material grade and profile. Standing seam aluminum with a premium finish pushes toward the high end; exposed-fastener steel sits low.
- Penetrations and flashings. Every skylight, vent, and tie-in is a custom detail.
- Permit scope. Miami-Dade product approval, engineering, and inspection add cost but are not optional here.
Our written estimate itemizes tear-off, underlayment, panels, trim, fasteners, and permit fees, so you see exactly where the dollars land. Upfront pricing means the number you sign is the number you pay. Call (844) 761-9356 to get that number in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Tamiami homes specifically do to this job
Tamiami is unincorporated Miami-Dade at the edge of the Everglades, ZIP 33184, and it sits inside the High Velocity Hurricane Zone. That single fact reshapes every metal roof here: nothing goes on the structure without Miami-Dade product approval, and every panel and fastener has to meet post-Andrew wind-load compliance. The other reality is the housing stock. These are mostly 1970s-1990s concrete-block ranch homes with barrel tile or shingle roofs, plus low-rise Mediterranean townhome clusters along the SW 8th Street corridor, and plenty of them carry unpermitted Florida rooms and patio enclosures from prior owners. Before the new roof can pass inspection, we often have to legitimize or remove that older work, which is a permitting detour you should budget for. Intense sun, salt-laden humid air, and June-November hurricane season also age underlayment and fasteners faster here than inland. When a metal roof is part of a full Roofing in Tamiami scope that touches soffits and fascia, we sequence it together. Homeowners also commonly pair a re-roof with Window Replacement in Tamiami and Impact Windows & Doors in Tamiami to meet the same wind-borne-debris standards at the openings.
Serving Tamiami, FL – Our Local Coverage Area
We serve Tamiami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Metal Roofing in Tamiami
Most jobs run 5 to 12 working days once the permit is approved, with tear-off and decking taking 1 to 2 days and panel installation 2 to 4. The permit review ahead of that can add days or weeks depending on submittal, so plan the start date around it. Call (844) 761-9356 for a timeline tied to your roof.
Yes. Because Tamiami is inside Miami-Dade’s High Velocity Hurricane Zone, a metal roof requires a permit with product approval and wind-load engineering. Skipping it risks your insurance and the 40-year recertification. We pull the permits and schedule the inspections as part of the job.
Usually yes. Metal roofing goes on over the existing deck, so structure rarely changes unless we find rot or an unpermitted enclosure that has to be addressed. The panel profile may need to shift on low-slope carport or Florida-room sections. We’ll flag that during inspection.
Metal runs higher up front than a standard shingle roof, in the $17,700 to $47,200 range for most Tamiami homes, but it lasts far longer and handles salt air and sun better. Call (844) 761-9356 for a side-by-side written estimate on your roof.
Every metal roofing project is covered by our 730-Day Done Right Promise, on top of the manufacturer’s finish warranty on the panels. If something isn’t done right, we make it right. Ask about the specific finish warranty at your estimate.
Get a free Metal Roofing estimate in Tamiami
We’ll come out, inspect the roof and deck, and give you a written line-item estimate for metal roofing in Tamiami with no pressure to sign on the spot. Call (844) 761-9356 and a live person picks up, day or night. Behind it all is our 730-Day Done Right Promise and upfront pricing that holds. We serve Tamiami and the surrounding areas, and every estimate is free.
Written by the team at Groundwork Construction Co.