Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Energy-Efficient Windows in Kendale Lakes, FL: What the Job Actually Involves
Replacing the original single-pane windows in a Kendale Lakes home with energy-efficient units usually runs $4,500 – $15,000 for a typical house, and most full-home replacements are finished in two to four working days. The work is a straight swap of glass, frames and seals on a 1970s-90s concrete block home, done under a Miami-Dade permit, with no structural changes required. Call (844) 761-9356 for a free on-site estimate.
How We Run an Energy-Efficient Window Job, Stage by Stage
Window replacement looks simple from the street. In a Kendale Lakes CBS home it’s a sequenced job, and the order matters because the openings are set in stucco and every one of them has to shed Miami-Dade rain for the next 30 years.
- Stage 1: In-home measure and product selection (day 1, about 90 minutes). We measure every rough opening, confirm the wall assembly (block, furring, stucco thickness), and check whether the existing frames are square. You decide glass package, frame material and finish at this meeting, because lead times run 3 to 6 weeks for custom-sized units. This is the decision point that sets the whole schedule.
- Stage 2: Permit and Miami-Dade product approval (1 to 2 weeks). We pull the window permit and document the Notice of Acceptance for the product going in. Miami-Dade requires the exact product approval number for the glazing and anchorage being used, so the paperwork has to match the unit, not just the brand.
- Stage 3: Demo and prep (day 1 of install). Old sashes and frames come out, the block opening gets cleaned and squared, and any soft stucco or rotted furring is cut back. On 30-50 year old homes this is where surprises show up, and where we tell you before we proceed rather than after.
- Stage 4: Set, shim, anchor, seal (days 1 to 3). New units go in plumb and level, anchored per the approval drawing, then flashed and sealed in two passes. Interior trim and exterior stucco patching follow on the same visit. A whole-house job runs two to four days depending on window count.
- Stage 5: Inspection and walkthrough (about a week later). The Miami-Dade inspector signs off on anchorage and flashing, then we walk every opening with you and check operation, locks and drainage weep holes. That walkthrough is where you confirm the seal is right, and it’s backed in writing by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Energy-Efficient Window Options You’ll Choose Between
Every choice below changes cost and performance in a way you’ll live with for decades. Here’s the honest version of each.
- Glass package: single vs. double vs. low-E laminated. Double-pane low-E is the standard for this climate and cuts solar heat gain dramatically over the original single glazing. Laminated impact glass costs more but doubles as hurricane protection, so you skip separate shutters.
- Frame material: vinyl vs. aluminum vs. fiberglass. Vinyl is the value pick and handles humidity well. Aluminum is strong and slim but conducts heat unless it has a thermal break. Fiberglass holds up to UV and heat without warping, at a higher price.
- Impact-rated vs. non-impact plus shutters. Miami-Dade wind-borne debris rules mean you’re either buying impact-rated glazing or keeping a shutter system. Impact units cost more up front but eliminate the pre-storm shutter routine.
- Fixed, casement or slider configuration. Casement and awning windows seal tighter than sliders and are the better energy choice on exposed walls. Sliders are cheaper and suit lanai openings.
- Interior finish and trim. Standard drywall return vs. new interior casing changes appearance and labor. We quote both so you’re choosing, not guessing.
Brand partners we specify include Andersen and Marvin for performance-driven units, and we coordinate window work with other trades when a homeowner is also handling siding or trim through our Windows & Doors service.
What Energy-Efficient Windows Cost in Kendale Lakes, FL
A full-home energy-efficient window replacement in Kendale Lakes typically lands between $4,500 and $15,000, and impact-rated installations run $8,000 to $25,000. Where your job falls inside those ranges comes down to five variables.
| Line item | Typical range |
|---|---|
| Standard window replacement (per home) | $4,500 – $15,000 |
| Impact window installation (per home) | $8,000 – $25,000 |
| Permit and product approval documentation | Included in written estimate |
| Stucco patching and interior trim | Included in written estimate |
The variables that push you toward the low or high end: window count and size (a 12-opening ranch is not the same job as an 18-opening home with a Florida room); existing condition (rotted furring or failed stucco adds repair labor); glass specification (impact laminated vs. standard low-E); frame material (fiberglass and thermally broken aluminum cost more than vinyl); and permit scope (a window-only permit is simpler than a combined window-and-addition permit). Our written estimate itemizes each opening, the glass package and the permit line. What’s typically not included: structural repairs uncovered during demo, HOA fees, and any drywall work beyond standard trim return. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Kendale Lakes Homes Specifically Do to This Job
Kendale Lakes is a build-out subdivision. Nearly every project here is redoing a 1970s-90s concrete block and stucco home on a fully developed lot, not building new, so window work always means working around existing walls, existing stucco and existing trim. The original single-pane units in these homes are now at or past their service life: failed seals, fogged glass, corroded frames and leaking weep holes are what we find most often in the 33183 ZIP. The subtropical climate does the rest. Extreme summer UV and heat break down old seals and glazing, and afternoon thunderstorms plus hurricane season test every flashing detail we install.
Because these homes sit in mature Kendall subdivisions, HOA rules on window appearance and frame color apply more often than you’d expect, and Miami-Dade’s post-Andrew product approval and post-Surfside inspection regime means the permit is not a formality. We document the product approval for the exact glazing going in and coordinate the inspection. Homeowners in Kendale Lakes often pair window work with Fence Repair in Kendale Lakes or an Iron Fence in Kendale Lakes, and when a window replacement is part of a bigger Windows & Doors in Kendale Lakes plan we scope it together from the start. We cover all of Kendale Lakes and the surrounding Kendall neighborhoods.
Serving Kendale Lakes, FL – Our Local Coverage Area
We serve Kendale Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Energy-Efficient Windows in Kendale Lakes
Most full-home replacements take two to four working days on site after a 3 to 6 week custom lead time. The install itself moves fast once the permit and product approval are in hand, which is why the upfront paperwork sets the real schedule.
Yes. Miami-Dade requires a window permit with the specific product approval for the glazing and anchorage. We pull it, document it and coordinate the inspection as part of the job.
Window replacement is a same-opening swap and doesn’t touch plumbing or structure. Only if demo uncovers rotted furring or failed stucco do we add repair work, and we tell you before proceeding.
Standard replacement runs $4,500 – $15,000 and impact-rated installation runs $8,000 – $25,000 for a typical home. Call (844) 761-9356 for an exact quote, because estimates are free.
Every installation is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t done right, we make it right.
Get Your Free Energy-Efficient Window Estimate in Kendale Lakes
Call (844) 761-9356 for a free on-site estimate. We’ll measure every opening, walk you through glass and frame options, and hand you a written itemized quote with the permit line included. A live person answers around the clock, and technicians arrive background-checked and in uniform. No-hassle upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. Let’s get your Kendale Lakes windows measured right.
Written by the team at Groundwork Construction Co.