A Groundwork company - serving The Hammocks, FL
Iron Fence in Kendale Lakes, FL | Groundwork Construction Co. of The Hammocks

Iron Fence in Kendale Lakes - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Kendale Lakes, FL: What It Costs and How Long It Takes

An iron fence in Kendale Lakes runs $3,500 – $9,000 for a typical single-family lot, and most jobs take two to four days on site once the layout and finish are locked. You’re buying a welded steel or wrought-iron system set in concrete footings, not a kit that rattles loose in a storm. Call (844) 761-9356 and we’ll walk your property line and price it in writing.

Call (844) 761-9356

How We Build an Iron Fence in Kendale Lakes, Stage by Stage

An iron fence is mostly a footing job that happens to end in metal. The panels go up fast. What takes time is layout, digging, and cure. Here’s the real sequence.

  • Stage 1 – Site walk and layout (about an hour, day of estimate). We mark the actual property line against your survey, note where the concrete driveway apron, pool cage, or screened lanai meets the run, and flag any irrigation lines or buried conduit. You decide the height (4 ft, 5 ft, or 6 ft), the picket spacing, and whether gate posts get set deeper for a swinging gate. This is also where we confirm whether the run crosses a swale, because drainage easements along the Kendall canals change where posts can legally land.
  • Stage 2 – Utility locate and demo (half a day). Sunshine 811 marks the public utilities before anyone digs. If there’s an existing wood or chain-link fence, we pull it and haul it off. On most Kendale Lakes lots the old fence is 20-plus years old and half-buried in roots, so plan on a morning for removal alone.
  • Stage 3 – Footings (day one into day two). Posts go in 24-inch-deep, 10-to-12-inch-diameter concrete footings, set below grade and crowned so water sheds away. This is non-negotiable in Miami-Dade’s sandy fill and high water table: shallow footings lean within a season. You decide now whether you want the concrete visible or mounded and sodded over. Cure takes 24 to 48 hours before panels go on.
  • Stage 4 – Panel and gate hang (day two or three). Rails weld or bolt to posts, pickets align, and the gate gets its hinges, latch, and closer. You sign off on gate swing direction and latch height here, because changing it after welding means cutting and re-powder-coating.
  • Stage 5 – Finish and final walk (same day). We touch up field welds with matching coating, clean up, and walk the run with you. You get the workmanship document in hand that day.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Choices You’ll Actually Make on an Iron Fence

Two decisions drive most of the cost and all of the longevity: what the metal is, and how it’s protected. Getting either wrong in South Florida humidity shows up as rust within three or four years.

  • Material grade. Solid wrought iron (true puddled iron) is rare and expensive now. What you’ll mostly choose between is pressed-steel ornamental panels, which run $3,500 – $6,000 installed and give you a clean traditional look, and heavier hot-rolled steel or aluminum-cast systems at $6,000 – $9,000 that hold up better to impact and take a gate without sagging.
  • Finish and coating. Powder-coat over galvanized steel is the standard for our climate and holds color for a decade or more. Bare or thin-painted steel will flash rust on welds and scratch points. If the fence is within salt-spray distance of the coast, we spec a heavier galvanized basecoat.
  • Picket style and spacing. Spear-top vs. flat-top, 4-inch vs. 6-inch spacing. Tighter spacing looks better and costs more per linear foot. Vertical pickets meet most Miami-Dade pool safety sightline requirements better than horizontal rails.
  • Height and configuration. 4 ft reads as decorative and keeps pets in. 5 to 6 ft is a real barrier for privacy and pool code. Each foot of height adds roughly 15 – 20% to material cost.
  • Gates and automation. A single walk gate is standard. A drive gate with a swing operator adds real cost and requires a power drop at the post, which we plan in Stage 1.
  • Accent and finish color. Black is standard. Bronze and custom colors are available and worth it if the fence sits against a lighter CBS stucco wall.

What an Iron Fence Costs in Kendale Lakes, FL

For a typical 33183 lot, plan on $3,500 – $9,000 for the fence itself, with a median job in the low-to-mid $5,000s. Here’s where that number moves:

Line Item Typical Range
Pressed-steel ornamental fence, installed $3,500 – $6,000
Hot-rolled steel / cast iron system, installed $6,000 – $9,000
Walk gate (single) Included to +$600
Drive gate with operator and power drop Add $1,500 – $3,500
Old fence removal and haul-off Add $250 – $700
Heavier galvanized basecoat (coastal exposure) Add 8 – 15%

What moves a job to the high end: total linear footage over 150 ft, running over an existing concrete apron or pool deck (which means coring rather than digging), tight property lines that require hand-digging near a survey marker, and gates. What keeps it at the low end: a straight run on open lawn, a standard 4 ft pressed-steel system, and no gate automation.

What’s in every written estimate: footing spec, post spacing, coating, gate hardware, haul-off, and the workmanship term. What’s not: landscape repair after digging, sod replacement where footings were crowned, and any HOA fees for architectural review. We list those separately so the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Kendale Lakes Homes Specifically Do to an Iron Fence Job

Kendale Lakes is a build-out Kendall subdivision, ZIP 33183. Almost every job here is redoing a 1970s-to-1990s CBS home with stucco walls, not a greenfield build. That matters for an iron fence in two specific ways. First, most properties already have a fence line that’s been through one or two replacements, and the old footings are still in the ground. We’re often pulling a buried wood post out of the exact spot the new steel post needs to go. Second, because these are small lots in a dense subdivision, the fence line frequently runs tight against the screened lanai, the pool cage, and the concrete driveway apron, so a fair share of the job is hand-digging rather than machine digging. If you’re planning the fence as part of a full Fence Installation in Kendale Lakes project, the layout works best when it’s drawn at the same time as the rest of the yard plan.

Miami-Dade’s post-Andrew wind code and the county’s structural inspection regime shape the work too. Any iron fence on a lot where a garage-to-room conversion or an addition already happened needs the fence line checked against the survey, because postholes near a converted slab sometimes hit old footings or conduit that was never redrawn. And the county’s HOA and easement rules are real: many of the subdivisions that feed 33183 have architectural review boards, and the Kendall canal-adjacent lots carry drainage easements that legally restrict where you can set a fence. That’s why our layout walk is first, not last. We cover Kendale Lakes regularly, so we know what the inspectors and the review boards here expect.

Serving Kendale Lakes, FL – Our Local Coverage Area

We serve Kendale Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Iron Fence in Kendale Lakes

Get a Free On-Site Estimate for Your Iron Fence

Every iron fence project in Kendale Lakes starts the same way: a free on-site estimate where we walk the property line, confirm the layout against your survey, and hand you a written line-item price with the footing spec and material grade spelled out. Call (844) 761-9356 to book it. A live person answers, every time. If you’re also redoing the pool deck or driveway while the fence goes in, homeowners often pair this with Patios, Walkways & Pool Decks in Kendale Lakes, or plan it alongside ADU Design & Permitting in Kendale Lakes if a backyard build is on the table. For the broader scope, see our Fence Installation service.

Written by the team at Groundwork Construction Co.

Why Kendale Lakes Chooses Groundwork Construction Co. of The Hammocks

We set the standard for iron fence in Kendale Lakes.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Kendale Lakes

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Kendale Lakes Customers Say

Trusted by homeowners across Kendale Lakes and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ready for Iron Fence in Kendale Lakes?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Kendale Lakes.

(844) 761-9356

Request a Free Estimate in Kendale Lakes

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch