Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Richmond West, FL: What It Takes
Custom & Geometric Windows in Richmond West typically run $8,000 – $25,000 installed, depending on how many units you’re doing and whether they’re impact-rated for Miami-Dade’s wind rules. A single arched or trapezoid accent window runs $1,200 – $3,500 installed; a whole-house package of six to ten shapes with impact glass lands toward the top of the range. Most jobs here finish in three to five weeks from measure to final inspection. Call (844) 761-9356 and we’ll walk your openings and give you a written line-item price.
How We Install Custom & Geometric Windows in Richmond West, Start to Finish
Shaped windows fail for one reason more than any other: the opening wasn’t built to the drawing. Everything we do in Richmond West is sequenced to catch that before the frame goes in.
Stage 1 – Site measure and template (day 1, about 2 hours)
We measure every opening and, for arches, half-rounds and trapezoids, build a physical template of the rough opening. You decide the shape profile at this stage: true radius, eyebrow, or segmented arch, because each one changes what the manufacturer builds. On these 1990s CBS block walls, we also probe for existing buck framing and confirm the masonry opening is square.
Stage 2 – Product selection and wind-load engineering (days 2 to 6)
You pick glass, frame material and finish. We submit the opening schedule for the manufacturer’s product approval documentation, which Miami-Dade County requires for anything inside the High Velocity Hurricane Zone. This step is where jobs stall if the product approval doesn’t match your opening size, so we lock it before ordering. You’ll approve the final spec sheet in writing.
Stage 3 – Permit and HOA architectural review (roughly 2 to 4 weeks)
Most Richmond West subdivisions sit behind an HOA that wants architectural review before the county permit is even filed. We prepare both packages: elevation drawings, product approvals and the county submittal. Weeks of clock time sit in this stage, not in the labor.
Stage 4 – Fabrication and install (manufacturing 4 to 8 weeks, install 1 to 3 days)
Custom shapes are built to order and that lead time is real. Once the units land, a typical six-window package installs in two days on site. We set the frame, check the arch against the template, flash the sill and head, and seal. Skim coating and stucco patching around the shapes follows the same week.
Stage 5 – Inspection and punch list (day after install, half a day)
The county inspects for correct product approval labeling and installation per the approved drawings. We walk the job with you, operate every unit, and handle anything on the punch list before we’re done. This is also where the 730-Day Done Right Promise starts, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Shape a Geometric Window Job
Shapes cost more than rectangles for reasons that are mostly about fabrication, not marketing. Here’s what you’re picking between.
- Frame material. Vinyl keeps the price down and suits most suburban Richmond West elevations; aluminum holds a crisper radius on tight arches and takes a wider color range; wood-clad gives the best look on a Mediterranean facade at roughly 30 to 50 percent more. We work with Therma-Tru entry systems and ViewLux shapes where the spec calls for them.
- Glass package. Impact-rated laminated glass is the default inside the HVHZ. Low-E coatings help on west-facing arches where afternoon sun cooks the room. The trade-off is cost and a slightly different tint, not performance.
- Shape complexity. A half-round is straightforward. A segmented arch, a true radius over 6 feet, or a trapezoid mated to a sloped roofline pushes fabrication up and adds lead time. Each extra curvature is money.
- Trim and surround. Stock casing, custom millwork, or stucco return. On CBS block walls with stucco, a clean stucco return often reads better than applied trim and holds up to the sun.
- Operating vs fixed. Most geometric units are fixed, which is cheaper and seals better. If you need ventilation, plan an operable unit next to the shape instead of trying to make the arch open.
If the shapes are one part of a larger facade project, it’s worth looking at our Windows & Doors in Richmond West page to see how the whole scope fits together, or the Windows & Doors hub for the full service picture.
What Custom & Geometric Windows Cost in Richmond West, FL
Custom & Geometric Windows in Richmond West run $8,000 – $25,000 for a typical multi-window package. A single accent unit is $1,200 – $3,500. Here’s roughly how the number breaks down.
| Line item | Typical range |
|---|---|
| Single fixed geometric unit, installed | $1,200 – $3,500 |
| Package of 6 to 10 shaped units, material only | $5,500 – $17,000 |
| Impact-rated laminated glass upgrade | $150 – $450 per unit |
| Permit and HOA review support | $400 – $1,200 |
| Stucco repair and finish around shapes | $600 – $2,000 |
What pushes a job to the low end: stock sizes that happen to fit, fixed units, vinyl frames, and no structural work. What pushes it to the high end: true-radius arches over 6 feet, wood-clad exteriors, relocating an opening, or discovering rotted buck framing inside the wall. Permit scope matters too. A one-for-one replacement is a lighter submittal than enlarging an opening in a CBS wall.
Your written estimate spells out unit sizes, glass spec, frame finish, permit responsibility, and stucco repair. It does not include hidden change orders, because the number you see is the number you pay. Call (844) 761-9356 for a free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond West Homes Do to This Job
Richmond West was built out mostly in the 1990s and 2000s, so the homes along SW 152nd through 168th Streets are two decades old and often due for a facade refresh rather than a new build. That matters here because the original buck framing around a shaped opening has had twenty years of subtropical sun and humid air working on it. We regularly open a wall on a half-round in one of the gated subdivisions off US-1 and find the framing soft enough that it has to be replaced before the new unit goes in. It’s not a surprise; it’s the pattern.
Miami-Dade County’s High Velocity Hurricane Zone product approval rules apply on nearly every window permit in Richmond West, so the manufacturer documentation has to match the opening exactly. Many HOA-gated communities want architectural review before the county sees the submittal, which adds weeks. Clay and concrete tile roofs on these homes also matter for arches that tuck under the eave, because the flashing detail has to work with the roof edge, not against it. We cover the full Richmond West area, and homeowners often pair a facade refresh with Concrete Driveways & Concrete Work in Richmond West or Asphalt Driveways & Resurfacing in Richmond West while the scaffolding is already up.
Serving Richmond West, FL – Our Local Coverage Area
We serve Richmond West and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Richmond West
Plan on three to five weeks for most packages, with manufacturing and permit review eating most of that time. The install itself is usually one to three days on site. Call (844) 761-9356 for a schedule built around your opening sizes.
Yes. Miami-Dade County requires a permit for window replacement and new openings inside the HVHZ, and the product must carry the matching approval. We pull the permit, prepare the HOA submittal, and handle inspection scheduling. Call for a free estimate and we’ll walk you through the paperwork.
Often yes, if the shape fits the existing rough opening or replaces a unit in the same spot. Enlarging an opening in a CBS block wall means structural work and a heavier permit submittal. We tell you which case you’re in after the site measure.
No, not on our written estimate. The materials and quantities are locked before we order. The one thing that can change the number is hidden damage behind the wall, like soft buck framing, and we show you photos and a price before doing that work. Call (844) 761-9356 for upfront pricing.
Every install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it starts the day we finish. Call for a free estimate.
Get a Free Estimate for Custom & Geometric Windows in Richmond West
Call (844) 761-9356 for a free on-site estimate on your Custom & Geometric Windows project in Richmond West. A live person answers, day or night, and we’ll set a time that works for you. On the visit we measure every opening, template the shapes, and hand you a written line-item price with the permit and HOA steps spelled out. No pressure, no surprise numbers.
Written by the team at Groundwork Construction Co.