Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Kendall West, FL: What to Expect
Custom & Geometric Windows in Kendall West, FL typically run $8,000 to $25,000 installed, and the work takes two to four weeks from template to final inspection. That range covers the shape itself: the arched, angled, trapezoidal, half-round and eyebrow openings that standard stock windows can’t fill. A single feature arch in a gable is on the low end; a full bank of custom shapes across a two-story elevation with tempered glass and impact ratings lands near the top. Call (844) 761-9356 and we’ll template your opening and put a real number in writing.
Why wind is the whole conversation here
Kendall West sits on the western edge of Miami-Dade, close enough to the Everglades boundary that wind-driven rain and hurricane-season gusts are a design condition, not a hypothetical. A window opening that isn’t sealed and rated properly becomes a pressure breach. In a pocket of 33193 where homes are mostly CBS block with stucco skins, the failure we see isn’t the glass itself. It’s the flashing and the stucco return around a shape whose frame was set without the right weather barrier behind it.
So we treat custom & geometric windows here as a wind-resilience job first and a look second. Every unit meets Florida wind-borne debris approval and High-Velocity Hurricane Zone product standards, and the installation includes the flashing and sealing detail that keeps them working when it matters. A beautiful arch that leaks at the sill is a liability. The 730-Day Done Right Promise sits behind every one we set.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How the job actually runs, stage by stage
Custom shapes aren’t cut out of a catalog, so the timeline is different from a standard retrofit. Here’s the real sequence.
- Stage 1 – Site measure and template (1 visit, 60 – 90 minutes). We measure the rough opening, confirm the wall type and check what’s behind the stucco. On arched openings we take a physical template, not just dimensions, because a half-round that’s a quarter-inch off won’t seat. You decide the shape and whether we’re matching an existing arch or introducing a new one.
- Stage 2 – Product selection and order (1 – 2 hours with you, then a 4 – 8 week lead time). This is where you pick frame material, glass package and finish. Custom units are built to order, which is why the wait is longer than stock. You sign off on the spec sheet before it goes to the manufacturer.
- Stage 3 – Prep and demo (1 day per opening, sometimes 2 for a bank of shapes). We protect the interior, cut back the stucco return to sound material and remove the old unit. If the existing opening was framed wrong, this is where we find it and correct it before anything goes in.
- Stage 4 – Setting, flashing and sealing (same visit). The unit is set plumb and level, weather barrier is lapped over the nailing flange, and the flashing detail is done before stucco patching. This is the part that decides whether the window keeps water out for the next twenty years.
- Stage 5 – Stucco patching, inspection and finish (2 – 4 days). We patch the stucco, let it cure, then paint to match. Permit inspection happens before the opening is closed out. You walk the job with us and sign off.
Part of a full Windows & Doors in Kendall West scope? We’ll sequence the shapes so they don’t hold up the rest of the project.
What you’ll choose between
- Frame material: Vinyl is the value pick and holds up well in South Florida sun, but custom shapes in vinyl are limited to certain radii. Aluminum lets you hit tighter curves and larger spans at a higher cost. Wood-clad, including Therma-Tru’s exterior lines, gives the best look on a feature arch and needs more upkeep on a west-facing wall.
- Glass package: Impact-rated laminated glass is the default here given hurricane code. Low-E coatings help with the intense afternoon sun that hits west-facing windows in this part of Kendall West. Tempered glass is required on large or low shapes for safety, and it adds cost.
- Shape and span: A half-round or eyebrow in a gable is straightforward. A full arch spanning a set of doors, or a trapezoid that has to line up with a roofline, needs a custom build and a longer lead time.
- Finish: Factory finish outlasts field paint on a curved frame. The trade-off is cost and a narrower color palette.
- Brands we use: Mr-Glass for glass and impact assemblies, ViewLux for feature units, Therma-Tru and Barrette for entry and specialty configurations. You pick quality, not just availability.
See the difference
Before
After
Before
After
Before
AfterWhat Custom & Geometric Windows costs in Kendall West, FL
Plan on $8,000 to $25,000 for a typical custom & geometric window project here. The low end is one or two feature shapes on an otherwise standard elevation. The high end is a full bank of custom openings with impact glass, tempered where required, and structural corrections inside the wall. Here’s what moves the number:
- Number and complexity of shapes: A half-round is a fraction of the cost of an arch that has to be hand-templated.
- Existing wall condition: Cracked stucco, rotted framing or a rough opening that’s out of square adds demo and repair. That matters more in a stock of 1980s – 2000s CBS homes where original flashing has often failed.
- Glass and rating: Impact-rated and tempered assemblies cost more than standard, but they’re required here for most openings.
- Structural work: If a new shape needs a header or a relocated opening, that’s a different job than a swap.
- Permit and inspection scope: Wind-mitigation documentation and a structural change pull a bigger permit than a like-for-like replacement.
A written estimate lists the units, glass, finish, flashing, stucco patch and permit line by line. It excludes painting to match an entire wall (we’ll quote that separately if you want it) and any hidden framing repair, which we price only after we open the wall. Upfront pricing, no surprises: the number you sign is the number you pay unless you approve a change.
What Kendall West homes specifically do to this job
Most of what we work on in Kendall West is single-family and low-rise townhome stock from the late 1980s through the 2000s, built CBS with stucco skins and barrel-tile or shingle roofs. That build era means the windows are reaching the end of their service life right about now, and the flashing around original openings has often failed. On homes along the western edge of 33193, against the Everglades buffer, any change that touches the exterior envelope runs into setback and drainage review and elevated flood-plain considerations that interior Kendall crews don’t deal with. We plan the permit scope around that from the start.
HOA architectural review is a real gatekeeper in the villa and townhome communities. You’ll usually need board approval on shape and finish before we order, and we’ll give you the spec sheet to submit. Storm-season wind-driven rain is the failure mode we design against, and it’s why the flashing detail and the HVIZ-rated assembly matter more than the frame color.
Serving Kendall West, FL – Our Local Coverage Area
We serve Kendall West and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Custom & Geometric Windows in Kendall West
Typically two to four weeks of on-site work, but the total calendar runs six to twelve weeks because custom units are built to order and carry a four-to-eight-week lead time. Call (844) 761-9356 for a timeline tied to your specific shapes.
Yes, most replacements and any change to the opening require a permit and a wind-mitigation inspection in this part of Miami-Dade. We pull the permit and manage the inspection. If the shape or framing changes, the scope is larger. We’ll tell you which one you’re in before anything is ordered.
Often yes, if the new shape fits the existing rough opening and the header is sound. A larger arch or a relocated opening needs structural work and a bigger permit. We determine that at the template visit so there are no surprises later.
Most projects land between $8,000 and $25,000 installed, driven by shape count, glass rating, wall condition and permit scope. Call (844) 761-9356 for an exact quote; estimates are free.
Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the installation, flashing and finish. Call (844) 761-9356 to schedule your free estimate.
Get a free estimate for Custom & Geometric Windows in Kendall West
Call (844) 761-9356 to schedule a free on-site estimate. A live person answers, 24/7. We’ll measure the opening, walk the flashing and stucco detail, and hand you a line-item quote with the permit scope spelled out. Many homeowners pair the window work with Concrete Driveways & Concrete Work in Kendall West or Asphalt Driveways & Resurfacing in Kendall West while crews are already on site. We cover all of Kendall West and the surrounding communities, and our Windows & Doors service handles the rest of the envelope when you’re ready.
Written by the team at Groundwork Construction Co.