Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Richmond Heights, FL: What to Expect
Asphalt driveways and resurfacing in Richmond Heights, FL typically run $3,500 – $9,000 for a new asphalt driveway and $250 – $700 for sealing an existing one, with resurfacing projects landing in between depending on how much base repair the job needs. Most residential driveways here are finished in two to three days once the schedule starts, plus a short cure window before you park on them. Call (844) 761-9356 and we’ll walk your driveway, talk through what the surface is actually doing, and put a number in writing.
How an Asphalt Driveway Gets Built or Resurfaced in Richmond Heights
Asphalt work is unforgiving of shortcuts. The part you see is maybe two inches of the job. Here’s the real sequence we follow, and what you’ll be deciding at each stage.
- Stage 1: Site walk and measurement (day 1, about an hour). We measure the footprint, check slope and how water leaves the driveway, and probe the existing base. You decide the layout, the width, and whether you’re going full replacement or resurfacing over sound asphalt. If your driveway ties into a wider project, this is where we talk about how it fits with Driveway & Pavers in Richmond Heights.
- Stage 2: Demo and excavation (day 1 – 2, one to two days). Old asphalt comes out, and we excavate to depth for the base. On Richmond Heights lots the limestone is often close to the surface, so rock breaking can add a day. You decide the base depth once we see what’s actually under there.
- Stage 3: Base prep and compaction (day 2, most of a day). Crushed stone base goes down in lifts and gets compacted in passes, not one dump-and-spread. This is the single biggest driver of how long the asphalt lasts. You’ll see the base before any blacktop goes on, and we want you to look at it.
- Stage 4: Paving (day 3, half a day). Hot mix goes down, gets screeded to slope, and is rolled while it’s still workable. Edges get finished and the transitions at the garage apron and street get tied in. You decide the finish grade at the apron.
- Stage 5: Cure and seal schedule (2 – 7 days, then months later). You stay off it for a few days, then we set a sealing timeline for once the asphalt has cured. Sealing too early traps oils; sealing too late lets water in. You decide when to book that follow-up.
If what you actually need is repair rather than a new surface, that’s a different scope with its own page, and we’ll tell you straight when resurfacing isn’t the right call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Asphalt in Richmond Heights
Most of the decisions on this job come down to a handful of real choices with honest trade-offs.
- Full replacement vs. resurfacing. Resurfacing (an overlay) costs less and is faster, but only works if the base is sound and the existing asphalt isn’t badly cracked or heaved. Replacement costs more, lasts longer, and fixes the base. If your driveway has alligator cracking or soft spots, an overlay is money spent twice.
- Base depth and stone grade. A deeper compacted base costs more up front and is what keeps the surface from rutting under Florida heat and summer downpours. Shallow base is cheaper and fails sooner. This is the choice that matters most and the one most homeowners never get asked about.
- Asphalt mix. Standard residential mix is fine for most driveways. A heavier mix holds up better on steeper grades or where a heavier vehicle parks regularly.
- Edging and drainage. Concrete or stone edging keeps the asphalt from raveling at the edges. A proper swale or drain keeps water off the surface. Cheap jobs skip this and the driveway tells you about it in two years.
- Sealer type. A quality sealer protects against UV and water. A thin, cheap sealer looks good for a season and then peels. We use a sealer we’d put on our own driveways.
When the driveway is part of a bigger exterior project, homeowners often pair this with New Detached ADU in Richmond Heights, since the ADU pad and the driveway get built together and share a grading plan.
What Asphalt Driveways & Resurfacing Costs in Richmond Heights, FL
Asphalt driveway paving in Richmond Heights runs $3,500 – $9,000, resurfacing an existing driveway sits in the middle of that range, sealing alone is $250 – $700, and a full driveway replacement runs $5,000 – $14,000 when the base has to come out too. Here’s what moves a job to the low or high end.
| Line item | Typical range |
|---|---|
| Asphalt driveway paving (new) | $3,500 – $9,000 |
| Driveway replacement (demo + new base + asphalt) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
Four variables decide where your number lands. Size and shape matter most: a long, curved driveway uses more material and more hand work at the edges. Existing condition is next; a driveway with a failing base needs excavation and new stone, which is the single biggest cost jump. Rock is the Richmond Heights wildcard, since the limestone can be shallow and add breaking time. And drainage and edging scope pushes the number up but is what keeps the surface from failing early.
A written estimate from us lists base depth, stone, asphalt thickness, edging, drainage, and disposal, so you can see exactly what you’re paying for. What it won’t include is anything we discover only after demo, like an unexpected buried utility or a fully failed base section, and those get quoted before we touch them. Upfront pricing, no surprises. If you need a second opinion on the number, call (844) 761-9356 and we’ll talk it through.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond Heights Homes Specifically Do to an Asphalt Job
Richmond Heights is one of South Florida’s historically Black communities, and its housing stock shows it in a way that changes the work. You’re driving through ZIP 33176 past original 1950s – 70s concrete block ranch homes on slabs, many with terrazzo inside and additions or second stories tacked on later. That mix of old and new is exactly what the driveway has to tie into. And because the limestone bedrock sits close to the surface here, excavation often hits rock sooner than it would in neighboring Richmond Heights-adjacent areas, which means rock breaking and a day of extra time. We plan for that instead of discovering it on day one.
The other local driver is water. The high water table and the heavy summer downpours mean a driveway that doesn’t shed water away from the slab will eventually undermine itself. We grade for drainage as a first decision, not an afterthought, and we make sure the apron and edges route water away from the house. If you’re touching the driveway as part of a larger project, our Driveway & Pavers service covers the surrounding scope, and homeowners planning more often pair this with Junior ADU & Interior Conversion in Richmond Heights.
Serving Richmond Heights, FL – Our Local Coverage Area
We serve Richmond Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Asphalt Driveways & Resurfacing in Richmond Heights
Most residential jobs are finished in two to three working days after demo, plus a few days of cure before you park on it. Rock at shallow depth or a fully failed base can add a day. Call (844) 761-9356 for a timeline for your specific property.
Permit needs depend on whether you’re touching the right-of-way, a swale, or a drainage structure, and on what your HOA requires. We pull the permits that apply and walk you through the inspection. Not every driveway needs one; we’ll tell you honestly whether yours does.
In most cases yes, a driveway is exterior surface work and doesn’t touch plumbing or the structure. If there’s a buried utility or the base needs deeper excavation near a slab, we check before we dig and quote anything extra first.
Resurfacing is cheaper and faster, and a full replacement runs $5,000 – $14,000 when the base has to come out. Resurfacing only works if the base is sound. If your existing asphalt is badly cracked, replacement is the honest answer. Call (844) 761-9356 for a free estimate.
Every asphalt project we do is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s the workmanship guarantee in writing, not a verbal handshake. Ask about it on your estimate call.
Get a Free Estimate for Asphalt in Richmond Heights
Call (844) 761-9356 to schedule a free on-site estimate for Asphalt Driveways & Resurfacing in Richmond Heights. We’ll measure the footprint, check the base and drainage, and put a written, line-item number in front of you with no pressure to sign on the spot. A real person answers the phone, and the number we quote is the number you pay. That’s the whole deal.
Written by the team at Groundwork Construction Co.