A Groundwork company - serving The Hammocks, FL
Custom & Geometric Windows in Tamiami, FL | Groundwork Construction Co. of The Hammocks

Custom & Geometric Windows in Tamiami - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Custom & Geometric Windows in Tamiami, FL: What the Job Actually Involves

Custom and geometric windows in Tamiami run $9,440 to $29,500 installed, and most homes need six to ten weeks from signed contract to final inspection because every arched, angled or trapezoid unit is made to order and has to clear Miami-Dade product approval before it ships. A single feature window can be measured and set in about three weeks. Call (844) 761-9356 to book a free on-site estimate and get a written, line-item number for your openings.

Call (844) 761-9356

How custom and geometric windows get built here, stage by stage

These aren’t stock units pulled off a shelf. Half the work happens before anything is ordered, and the sequence matters more than the schedule.

Day 1: Measure and template

We template every opening on site – arches get a physical pattern, angled units get plumb and level readings at four points. This is where the homeowner picks frame material, glass package and finish color, because those choices lock the order. Skipping a proper template on a radius window is how you end up with a $12,000 mistake that can’t be trimmed to fit.

Weeks 2 to 5: Permit drawings and product approval

In unincorporated Miami-Dade, the permit package has to show a Miami-Dade NOA (Notice of Acceptance) for the specific window product, plus wind-load calculations for the design pressure at your opening. For an arched or trapezoid window, the manufacturer’s approval document has to cover that shape, not just the rectangular system. Plan on two to four weeks for review, longer if the plan reviewer asks for a stamped correction.

Fabrication: four to six weeks

This is the long pole. Geometric shapes are built one at a time. Radius and true-arch units typically run four to six weeks; simple eyebrow or half-round shapes can come in faster. The homeowner should confirm glass package and grille pattern in writing during this window, because once fabrication starts, changes are a new order.

Installation: one to three days

Most custom and geometric window packages on a Tamiami home go in over one to three days depending on count and elevation. We pull the old units, check for rotted framing or failed flashing at the rough opening, set the new windows with the specified anchors, and seal per the approval drawings. Any hidden rot or rusted lintel gets flagged the same day, with a written price before we touch it.

Final inspection and closeout

A Miami-Dade inspector signs off on the anchors, flashing and label placement, and the homeowner gets the permit record plus the manufacturer’s warranty paperwork. We follow up with a walk-through to check operation and weatherstripping on every unit, then the project sits under the 730-Day Done Right Promise.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The options you’ll choose between

Custom shapes narrow the field fast, so knowing the trade-offs up front saves weeks of back-and-forth.

  • Aluminum frames with impact glass: the workhorse for Tamiami homes. Strong, holds up to salt-humid air, and the cost per opening sits in the middle of the range. Finishes are usually baked or anodized, and while the palette is broad, it isn’t endless.
  • Vinyl frames: the value pick on small geometric units like half-rounds over a front door or an octagon accent. Fine thermally, but the frame walls are thicker, so sightlines get chunky on a big feature window and the glass area shrinks.
  • Wood-clad or wood interior: the premium look for a dramatic two-story arch or a custom great-room wall. Materials like Andersen or Marvin give real finish choices inside and a low-maintenance exterior, but expect the higher end of the range and a longer fabrication timeline.
  • Glass packages: impact-rated laminated glass is basically the entry ticket under HVHZ rules. Upgrading to low-E or a specific solar-control tint helps on the west-facing sun here, but adds cost per square foot.
  • Door openings that complete the set: a front entry or slider in the same system is common. Therma-Tru and Mr-Glass products show up often on that part of the job because finish and frame color can match the windows.
  • Grille and finish style: simulated divided lites, color-matched trim and interior casing all drive cost. A single custom radius grille pattern is a fabrication line item, not a paint choice.

What Custom & Geometric Windows costs in Tamiami, FL

Expect $9,440 to $29,500 for a custom and geometric window package on a typical Tamiami home, with a single feature window at the low end and a whole-house custom set at the top. The opening count and shape complexity are the biggest levers, followed by frame material, glass package and how much rot or past unpermitted work has to be corrected first.

What pushes a project toward the high end: true radius and arched units (each is a custom fabrication run), wood-clad interiors, whole-house scope, and correcting a rough opening that wasn’t built to the right dimensions. A clean, single-half-round replacement stays near the bottom of the range.

A written estimate should list each opening by size and shape, the frame material and finish, the glass package, the permit and inspection fees, and the labor – nothing bundled into a lump sum. What’s typically outside the estimate: structural framing repair if a lintel or header is compromised, interior drywall and paint touch-up, and stucco patching around the exterior perimeter. We flag those the moment we see them and price them in writing before any work proceeds.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Tamiami homes specifically do to this job

Nearly every block home here sits inside Miami-Dade’s High Velocity Hurricane Zone, so every custom and geometric window has to carry product approval for that exact winding and meet wind-borne-debris and impact standards – design trends don’t get a vote. The 1970s and 1980s concrete-block ranches off SW 8th Street and the low-rise townhome clusters along that corridor often carry unpermitted Florida rooms and patio enclosures left by prior owners. When a geometric window lands on one of those walls, we routinely have to legitimize or remove the prior work before the new scope can pass inspection, and that changes the timeline and the price. Salt-laden humid air eats at fasteners and flashing, and the near-daily summer thunderstorms make water-intrusion detailing the difference between a window that holds for decades and one that leaks after the first June storm. We cover all of Tamiami, including the 33184 ZIP, and the same wind-load reality applies to neighbors in Westwood Lakes, Kendale Lakes, Sunset and Kendall West.

Serving Tamiami, FL – Our Local Coverage Area

We serve Tamiami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked – Custom & Geometric Windows in Tamiami

Get a free estimate on Custom & Geometric Windows in Tamiami

Call (844) 761-9356 for a free on-site estimate on custom and geometric windows in Tamiami. A live person answers, day or night. We’ll template the openings, walk you through frame and glass choices, and hand you a written line-item quote with the permit fees itemized, backed by the 730-Day Done Right Promise. This is often part of a full Windows & Doors in Tamiami scope, and if you’re updating the exterior at the same time, homeowners often pair this with Concrete Driveways & Concrete Work in Tamiami or Asphalt Driveways & Resurfacing in Tamiami. You can see the whole Windows & Doors service here.

Written by the team at Groundwork Construction Co.

Why Tamiami Chooses Groundwork Construction Co. of The Hammocks

We set the standard for custom & geometric windows in Tamiami.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Tamiami

Getting your custom & geometric windows project started is simple.

1

Call or Request a Free Estimate

Tell us about your custom & geometric windows project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local custom & geometric windows pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Tamiami Customers Say

Trusted by homeowners across Tamiami and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ready for Custom & Geometric Windows in Tamiami?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Tamiami.

(844) 761-9356

Request a Free Estimate in Tamiami

Tell us about your custom & geometric windows needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch