Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Sunset, FL: What the Job Actually Takes
Metal roofing in Sunset, FL runs $15,000 to $40,000 for most single-family homes, and a full tear-off and install takes roughly 5 to 10 working days once the permit clears Miami-Dade County. You’re getting a roof that sheds the August-to-October storm cycle and the brutal subtropical sun without the cracked, waterlogged tiles that plague so many 1950s – 1970s Sunset roofs. Call (844) 761-9356 for a free on-site estimate.
How We Run a Metal Roof in Sunset, Step by Step
Every job follows the same spine, and the county inspection schedule drives the pace. Here’s what each stage looks like and where you’ll be making decisions.
- 1
Day 1: On-site measure and feasibility. We measure the full roof plane, check the deck, and photograph every penetration and fascia run. Because most Sunset homes date to the 1950s – 1970s, we’re looking hard at the decking and roof-to-wall connections before we commit to a number. You decide panel type and color direction here.
- 2
Days 1 – 2: Permit intake through Miami-Dade UMS. Sunset is unincorporated, so the permit and inspection paperwork goes through the county’s Unincorporated Municipal Services office, not a standalone city building department. This step is where out-of-area crews lose a week or two. We file it correctly the first time and lock the schedule around the county’s review window.
- 3
Days 2 – 4: Tear-off and deck prep. Old roofing comes off, the deck gets inspected for rot and re-nailed to current wind-load standards, and any soft spots are replaced and documented for you. You see the deck condition in photos before we cover it.
- 4
Days 4 – 8: Underlayment, panels, and trim. We set the high-temperature underlayment, then the standing-seam panels, ridge, and edge metal. On bigger roofs this stretches a day or two. Panel layout and fastener spacing are set to satisfy the wind-load rating the county requires.
- 5
Day 8 – 10: Final inspection and walkthrough. The county inspector signs off, and we walk the roof with you, hand over the warranty paperwork, and confirm drainage paths are clear for the rainy season.
Our technicians have up to 12 years of experience setting metal panels, and every job is backed by our 730-Day Done Right Promise. If something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
Metal isn’t one product. The decision that moves your price and lifespan most is panel style, followed by finish and gauge. Here’s the honest read on each.
- Standing seam. Concealed fasteners, cleaner lines, best wind performance. Suits Sunset homeowners who want long life and minimal maintenance; the trade-off is a higher line-item cost than exposed-fastener panels.
- Exposed-fastener panels (5V and corrugated). The budget end. Great for sheds, carports, and utility structures common on Sunset lots; on the house itself the exposed washers wear over time and need periodic attention.
- Stone-coated steel. Gives you the look of tile or shingle without tile’s weight or breakage. A middle ground for homeowners who want profile detail but not true tile.
- Gauge and finish. Thicker steel costs more and resists dents better. A quality paint system holds color against South Florida’s UV load; cheaper finishes chalk and fade faster.
- Panel color and profile. This is largely aesthetic, but lighter colors cut attic heat gain noticeably, which helps in a Sunset summer.
For the wider envelope, homeowners often pair this with Window Replacement in Sunset to tighten the whole shell after the roof is watertight.
What Metal Roofing Costs in Sunset, FL
Plan for a metal roof to land between $15,000 and $40,000 on a typical Sunset single-family home. A partial or utility-structure install runs less; a large or complex roof runs more. Five things push the number from low to high end:
- Roof size and shape. Square footage plus hips, valleys, and multiple penetrations add labor and trim.
- Condition of the deck. Mid-century homes often hide rot or under-nailing that has to be corrected before panels go on. That extra work shows up as a documented line item, not a surprise.
- Panel and finish grade. Standing seam and better paint systems cost more up front and last longer.
- Permit scope and inspection. The county’s requirements on wind-load attachment and structural upgrades affect both labor and timeline.
- Access and site logistics. Longer drives and tight lots slow material handling.
Your written estimate lists materials, labor, deck repair allowances, permit fees, and disposal. What’s typically excluded: hidden structural repairs beyond the allowance, and upgrades you add mid-job, which we price in writing before any work continues. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Sunset Homes Specifically Do to This Job
Sunset is unincorporated Miami-Dade, so the whole permit and inspection flow runs through the county’s UMS office rather than a local city hall. That single fact reshapes the schedule: builders who assume a standard city building department get caught flat and add weeks. We file through UMS from the start, so no inspection window is missed. The mid-century housing stock built before the 1994 Florida Building Code is the second half of the story. Roof-to-wall connections on these homes often don’t meet current wind-load standards, and original decks need re-nailing before a metal panel system goes down. We routinely see this on blocks off Sunset Drive and near the older residential pockets around ZIP 33173, where 1960s low-pitch roofs sit directly over original single-pane windows. The hurricane season from August to October and heavy-rain flooding make a properly sealed, wind-rated metal roof a practical necessity, not an upgrade. If you’re looking at the wider scope, that’s part of a full Roofing in Sunset conversation.
Serving Sunset, FL – Our Local Coverage Area
We serve Sunset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Sunset
Most Sunset metal roof installations take 5 to 10 working days once the permit is issued, with the county’s UMS review adding 1 to 3 weeks beforehand depending on their queue. Complex roofs and hidden deck repairs stretch the tail end. Call (844) 761-9356 for a firm timeline on your home.
Yes. Because Sunset is unincorporated, the permit and inspections run through Miami-Dade County’s UMS, and a metal roof must meet current wind-load attachment requirements. We pull the permits and pass the inspections as part of the job, so you’re not chasing paperwork. Call us to talk through what your specific roof will need.
In most cases, no structural rework is needed beyond deck repair and re-nailing, but pre-1994 Sunset homes sometimes need upgraded roof-to-wall ties to meet current wind-load standards. We inspect and tell you exactly what the deck and connections need before the quote is final. Call (844) 761-9356 for an on-site assessment.
A full metal roof in Sunset typically runs $15,000 to $40,000, with standing seam at the higher end and exposed-fastener panels at the lower. Deck condition, panel grade, and roof complexity are the biggest swing factors. Call (844) 761-9356 for an exact written quote, estimates are free.
Every metal roof we install carries our 730-Day Done Right Promise on workmanship, and the panel manufacturer’s finish warranty applies on top. If something isn’t right within that window, we make it right. Call us to review the warranty terms for the panel you’re considering.
Need the rest of the home brought up to the same standard? Homeowners often pair this with Impact Windows & Doors in Sunset and Window Replacement in Sunset to lock in the whole envelope against storm season. We handle our full Roofing scope across Sunset, and our technicians arrive background-checked and uniformed on every visit, with calls answered by a live person 24/7.
Get a Free On-Site Metal Roofing Estimate in Sunset
Call (844) 761-9356 to schedule a free estimate for metal roofing in Sunset. A live person answers any time, and we’ll set a visit that fits your week. On the call we’ll confirm your roof type and rough square footage, answer permit questions through Miami-Dade UMS, and book the on-site measure. You’ll get a written, itemized estimate with upfront pricing and no surprises, plus our 730-Day Done Right Promise and $1,000 off on projects over $10,000.
Written by the team at Groundwork Construction Co.