Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Westwood Lakes: What It Costs and How Long It Takes
Replacing a bathroom vanity, re-tiling the floor and walls, and swapping out the fixtures in a Westwood Lakes home usually runs $9,000 – $28,000, and most jobs finish in three to six working days once materials are on site. Vanities, Tile & Fixtures work is smaller in scope than a full remodel but demanding on detail: the vanity set, the floor and wall tile, and the faucet, shower valve and trim package all have to land together. Call (844) 761-9356 for a free on-site estimate.
How a Vanity, Tile & Fixtures Job Moves From Demo to Final Caulk
This isn’t a “we handle everything” job. You’ll make five decisions along the way, and each one lands at a specific point in the schedule so nothing stalls. Here’s the real sequence we follow in Westwood Lakes homes.
Stage 1: Site check and tear-out (day 1)
We shut off water, set protection on the floors and doorways, and pull the old vanity, toilet and any wall or floor tile in the work zone. On a typical CBS home here, that means lifting tile set over old thinset or terrazzo, which adds a half day if the bond is stubborn. You’ve already picked the vanity size and rough location; we confirm it fits the alcove and that the existing drain and supply lines line up.
Stage 2: Substrate and waterproofing (day 2)
We repair any soft drywall, level the floor, and set backer board in wet zones. This is the stage you don’t see later but pay for if it’s skipped: a proper waterproof membrane behind tile in a Florida bathroom is what keeps a slow leak from eating the wall cavity. If we’re moving the vanity drain or adding a GFCI outlet, this is when the rough plumbing and electrical go in.
Stage 3: Tile layout and setting (days 2 – 4)
Before any thinset goes down, we dry-lay the tile and mark the layout so cuts land where they should and grout lines stay true to the room. Floor tile typically sets one day, wall tile the next, with a cure window before grout. Large-format tile takes longer to set but fewer grout lines; small mosaic takes more labor. You’ll want final tile selection locked in two weeks before this stage or the schedule shifts.
Stage 4: Vanity and fixture install (day 4 – 5)
Vanity cabinet gets set and shimmed level, the top goes on, the faucet and drain connect, and the toilet and shower trim get installed. If you’re using a stone or quartz top (Silestone and Caesarstone are common picks), the counter is templated after the cabinet is set and installed separately, which can add a day.
Stage 5: Caulk, punch list and walkthrough (day 5 – 6)
We caulk the wet joints, seal grout where specified, test every fixture for leaks, and walk the room with you. Anything that doesn’t pass gets fixed before we call it done, and the whole job is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Vanity, Tile and Fixture Options: What to Pick and What Each Choice Costs You
The choices below are the ones that actually move the number on this job. Each has an honest trade-off.
- Vanity cabinet: A stock cabinet (ready-to-assemble or pre-built) is the budget option and fits standard alcoves. A semi-custom cabinet lets you shift drawer stacks and door styles for a modest upcharge. KraftMaid cabinetry is a solid middle path when you want the size you actually need, not the one the store had in stock.
- Vanity top: Cultured marble is the cheapest and forgiving of small misalignments; quartz (Silestone, Caesarstone) resists stains and heat, costs more, and needs a template. Granite holds up but varies slab to slab, so you’re buying a specific stone, not a color.
- Floor tile: Porcelain is the workhorse: dense, water-resistant, mid-price. Ceramic costs less but chips more. Natural stone (travertine, marble) looks great and needs sealing in a humid climate.
- Wall tile and shower surround: Large-format porcelain reads clean and modern with fewer grout lines to scrub. Subway tile is inexpensive and classic. Glass mosaic costs more per square foot and more in labor.
- Faucet and shower fixtures: A Kohler or Moen valve-and-trim set is what most Westwood Lakes homeowners land on: mid-price, serviceable parts, and finishes (brushed nickel, matte black, chrome) that hold up in a humid bathroom. Cheap big-box faucets tend to fail at the cartridge first.
What Vanities, Tile & Fixtures Cost in Westwood Lakes, FL
Plan on $9,000 – $28,000 for a vanity, tile and fixture job in Westwood Lakes. Small powder-room or single-vanity scopes land near the low end; a full bathroom with floor and wall tile, a double vanity and new shower valve sits near the high end. These ranges are consistent with our bathroom work across the area.
What pushes the number up:
- Scope of tile: Floor only versus floor plus walls plus shower surround.
- Relocating plumbing or electrical: Moving the drain, adding a GFCI outlet, or shifting the vanity from one wall to another adds real labor.
- Material grade: Quartz versus cultured marble, large-format porcelain versus mosaic.
- Existing condition: Old terrazzo, water-damaged drywall, or a stripped shower pan means repair time.
- Permit scope: If plumbing is being altered, Miami-Dade requires a permit and an inspection, which adds fees and a scheduled visit.
A written estimate from us lists line items – tear-out, substrate, tile, cabinet, top, fixtures, labor, permit – with upfront pricing so the number you see is the number you pay. Not included unless you ask: moving structural walls, window changes, and anything outside the bathroom. Call (844) 761-9356 for an exact quote on your Westwood Lakes bathroom.
See the difference
Before
After
Before
After
Before
AfterWhat Westwood Lakes Homes Specifically Do to This Job
Westwood Lakes (ZIP 33165) is a built-out, post-war suburb, and nearly every project here is a renovation on a 1950s – 1970s lot, not new construction. The housing stock is mostly single-story concrete-block (CBS) with original terrazzo floors and jalousie windows, and many bathrooms here still have the original cast-iron drain and galvanized supply lines behind the tile. That matters for a vanity and tile job: pulling a 1970s vanity often exposes a wall cavity that’s been quietly wet for years, especially after heavy summer downpours, when flat-roofed CBS homes on the interior streets show hidden intrusion at the roof-wall junctions and window openings. We check those spots first.
Miami-Dade’s post-Surfside recertification and 40-year inspection rules, plus flood-zone elevation requirements for low-lying land west of the urban core, also change scope here: if the plumbing is being rerouted, the work needs to be permitted and inspected, and the bathroom may need to be brought up to current flood mitigation standards. Contractors who cut corners on waterproofing in this climate find out in the next wet season. We pull permits and pass inspections, and we don’t skip the membrane.
Serving Westwood Lakes, FL – Our Local Coverage Area
We serve Westwood Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Vanities, Tile & Fixtures in Westwood Lakes
Most jobs run three to six working days once materials are on site. A powder room with a single vanity and floor tile can be done in three; a full bathroom with wall tile, a new shower valve and a double vanity lands closer to six. Add a day if a stone counter is templated and installed separately. Call (844) 761-9356 to schedule your free estimate and get a start-to-finish date in writing.
Only if plumbing or electrical is being altered. Swapping a vanity and tile in the same location usually doesn’t trigger a permit. Moving the drain, adding a GFCI outlet or changing the shower valve does, and Miami-Dade requires an inspection. We handle the permit pull and the inspection, and the estimate states whether a permit is included.
Yes, and it keeps the job in the lower half of the price range. If the existing drain and supply lines line up with the new vanity and the shower stays put, we tile and install fixtures without opening the wall for plumbing. Moving plumbing or a structural wall pushes the job toward $28,000 and adds permit and inspection time.
Between $9,000 and $28,000. Tile scope, material grade, whether plumbing or electrical moves, and the condition of what’s behind the old vanity are the four main drivers. Call (844) 761-9356 for an exact quote on your bathroom; estimates are free.
The full job is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship on tile, vanity install and fixture connections for two years, which is among the longest in the residential construction space. Call and ask us to walk you through what the promise covers before you book.
Free Estimate for Vanities, Tile & Fixtures in Westwood Lakes
If you’re pricing a vanity, tile and fixture update for a Westwood Lakes bathroom, call (844) 761-9356 to book a free on-site estimate. We’ll measure the room, check the substrate and plumbing, and hand you a written line-item quote with upfront pricing and no surprises. A live person answers, 24/7. If you’re also planning a roof, homeowners often pair this with Tile Roofing in Westwood Lakes, and a full scope runs through our Bathroom Remodeling in Westwood Lakes page. We cover Westwood Lakes and nearby neighborhoods through our Westwood Lakes service area, and our Bathroom Remodeling service covers the wider project.
Written by the team at Groundwork Construction Co.