Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Kendall, FL: What It Costs and How Fast It Goes Up
A chain link fence in Kendall usually runs $3,500 to $9,000 for a typical residential lot, and most jobs are finished in two to four working days once the Miami-Dade permit clears. The fence itself is the easy part. What slows things down in Kendall is the survey, the permit review and the fact that most lots here already have something built on the property line. Call (844) 761-9356 for a free on-site estimate, and we’ll tell you what your specific yard needs before you commit to anything.
How we build a chain link fence, start to finish
Every job follows the same five stages. The durations below are realistic for a Kendall residential lot, not a best-case scenario.
Stage 1 – Walkthrough and layout (day 1, about an hour). We mark the property corners and walk the run with you. This is where you decide the height (4, 5 or 6 feet), whether you want a top rail on every post or just the terminal posts, and where the gates land. If your plat survey isn’t handy, we work from the recorded lot lines and confirm them before anyone digs.
Stage 2 – Utility locate and permit (days 1 to 3, mostly waiting). Florida law requires a call to 811 before any digging, and that ticket has to clear before post holes get dug. If your run needs a Miami-Dade County fence permit, we file it and pull it – you don’t touch the paperwork. This is the stage that sets your start date, and it’s the reason we don’t promise you a fence tomorrow.
Stage 3 – Demolition and prep (day 3 or 4, three to five hours). Old fence comes out, posts and concrete footings included. We haul it off. This is also when we find the surprises: a buried irrigation line, a root mass from a ficus or mahogany, an old footing that has to be broken out. You approve any extra before we do it.
Stage 4 – Posts and concrete (day 4, four to six hours). Holes go down 30 to 36 inches in most Kendall soils, posts set in concrete, and the line is braced and string-lined. Nothing gets hung the same day – the concrete needs to cure. That’s not a delay tactic, it’s how a fence stays plumb through a decade of rainy seasons.
Stage 5 – Fabric, hardware and gates (day 5, three to five hours). Tension wire, fabric, top rail, tie wires, gate hardware and latches. We walk the finished run with you, test every gate, and hand over the permit paperwork. Final payment happens after that walk, not before.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Vinyl-coated vs. galvanized fabric. Galvanized is the budget answer and holds up reasonably in Kendall’s salt air. Vinyl-coated (usually green or black) costs more up front and lasts years longer against humidity and coastal corrosion. On a lot within a couple of miles of the coast, we push the coated option.
- Framework gauge. Residential runs come in lighter and heavier wall thicknesses. The heavier gauge costs more and resists bending from a mower or a dog leaning on the rail. You feel the difference in year eight, not month one.
- Post spacing. Standard runs posts every 10 feet. Tighter spacing costs more and gives you a stiffer fence. On a long straight run along a canal or easement, it’s worth it.
- Gates. Walk gates and double drive gates are priced separately. A drive gate wide enough for a boat trailer or RV needs a heavier frame and a proper drop rod, which pushes the number up.
- Privacy options. Chain link is open by design. If you want screening, slats or a windscreen insert add cost but change how the yard feels from the street. If full privacy is the actual goal, that’s a different fence type entirely – worth saying out loud before we order material.
Where a matching gate frame or hardware brand genuinely fits the job, we’ll spec it. Most of the time the honest answer is that chain link doesn’t need a name brand anywhere – it needs the right gauge and the right coating.
What a Chain Link Fence costs in Kendall, FL
For a Kendall residential lot, expect $3,500 to $9,000 installed, including permit, demo of the old fence where needed, posts, concrete, fabric, rails, and one or two gates. Here’s what moves your job to one end of that range or the other.
| Line item | Typical range |
|---|---|
| Chain link fence installation (residential, per linear foot) | $18 – $40 |
| Walk gate | $250 – $600 |
| Double drive gate | $700 – $1,800 |
| Old fence removal and haul-off | $300 – $900 |
| Concrete footing breakout (old posts) | $150 – $500 |
| Miami-Dade fence permit and inspection | $250 – $700 |
Linear footage is the biggest lever – a 120-foot side yard lands near the bottom, a full-perimeter lot with a drive gate lands near the top. Coated fabric over galvanized pushes you up several hundred dollars and buys you years of life. Two gates instead of one adds real money. A buried old fence with concrete footings adds demo cost. And a property line that runs through root-heavy ground or an easement adds labor.
Your written estimate lists each of those lines separately. What it doesn’t include is sod replacement or landscaping repair where we dig, unless you ask us to quote it. Nothing in the estimate changes once work starts without your sign-off first. That’s the whole point of upfront pricing.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall homes specifically do to this job
Kendall is a built-out suburban corner of unincorporated Miami-Dade west of the Turnpike, and that shapes fence work here in ways it doesn’t in other parts of South Florida. Nearly every lot is already improved – 1970s-to-1990s concrete block homes on lots with an existing fence, often the original one from when the subdivision went in. That means demolition, footing breakout and property-line confirmation are part of almost every job in the 33176 ZIP, not an occasional add-on.
Because we’re in unincorporated Miami-Dade, the fence permit and inspection run through the county, and that review is the real calendar constraint. Homeowners here ask about the permit before they ask about price, and that’s the right order. If the fence is part of a full Fence Installation in Kendall plan that wraps the whole yard, the paperwork gets sequenced across the property rather than run twice. Homes along the Kendall Drive corridor and the older tract streets off Southwest 137th Avenue tend to sit on lots with mature landscaping close to the line, so root cuts and paver or Concrete Driveways & Concrete Work in Kendall edge repair come up on the same visit. A homeowner replacing a fence often pairs it with Asphalt Driveways & Resurfacing in Kendall while the yard is already torn up.
The climate adds its own wear pattern. Salt-laden coastal air and high humidity eat galvanized hardware first – gate hinges, latches, tension bands. That’s why we spec the coated fabric and heavier hardware on Kendall jobs. Our technicians have up to 12 years of experience on this kind of work, and we’re backed by our Fence Installation team across Miami-Dade. If you’re outside the 33176 area, our Kendall service page covers the nearby communities we reach as well.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Kendall
Plan on two to four working days on site, plus one to three weeks for the Miami-Dade permit review before we start. The build itself is fast – the permit is what sets your start date, and we don’t fudge that estimate to win the job. Call (844) 761-9356 and we’ll give you a realistic window for your lot.
Most residential fences in unincorporated Miami-Dade need a county permit, and height limits near the front property line are tighter than along the side or rear. We check the zoning on your parcel and pull the permit for you as part of the job. Call (844) 761-9356 for a free estimate and we’ll tell you exactly what your lot requires.
Yes – salt air corrodes galvanized hardware years faster than inland, and gate hinges are the first thing to go. For that reason we default to vinyl-coated fabric and heavier-coated hardware on Kendall jobs. Ask us about the coating upgrade when we’re out for your estimate.
In most cases, yes. We lay out the run to avoid existing pavers and sod where we can, and any breakout of old footings is quoted up front so there are no surprises. If your fence line crosses a concrete driveway or patio edge, we’ll talk through the repair before we start. Call (844) 761-9356 to schedule a walkthrough.
Every chain link fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on posts, concrete, gates and tension. Call (844) 761-9356 for a free estimate and a copy of the written guarantee.
Get a free chain link fence estimate in Kendall
Tell us your lot size, the run you’re fencing, and whether you want a drive gate, and we’ll walk the property and put a written, line-item estimate in your hands – permit included, no change orders lurking. One call to (844) 761-9356, answered by a live person, gets it scheduled. Estimates are free, and the number you see is the number you pay.
Written by the team at Groundwork Construction Co.