Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Kendall, FL: What They Cost and How They’re Built
Custom & geometric windows in Kendall, FL typically run $800 to $2,500 per opening for a shaped unit and $4,500 to $15,000 for a whole-home package that mixes arches, circles, and trapezoids with standard rectangles. Most Kendall jobs are measured in week one, fabricated in weeks two through five, and set and trimmed in a single day once the units land. Call (844) 761-9356 for a free on-site estimate. We give you a written, line-item price before anything is ordered.
How We Build a Geometric Window Package, Stage by Stage
The sequence for Custom & Geometric Windows matters more than the units themselves, because a mismeasured arch is a re-fabricated arch and a five-week delay. Here’s how a job actually runs.
Stage 1: Field measure and template (about 2 hours)
Every shaped opening gets a physical template, not just a tape measure. Arches are traced, radii are recorded, and we check rough-opening square against the existing CBS block. You decide here which openings get the treatment and which stay rectangular, because mixing shapes is what makes a facade look deliberate instead of busy.
Stage 2: Product selection and approval (3 to 7 days)
We walk you through glazing options, frame material, grille patterns, and finish. You sign off on a shop drawing. This is the step where homeowners hold up a custom & geometric windows project the longest, so we push for decisions early. Anderson and Marvin are the two lines we usually bring to this conversation.
Stage 3: Permit and product approval (2 to 4 weeks)
Miami-Dade County requires a permit for window replacement, and every unit needs a product approval (NOA) on file that matches the opening and the design pressure. We submit the drawings, wait on the county, and coordinate the inspection schedule. You don’t chase this paperwork; we do.
Stage 4: Fabrication (3 to 6 weeks)
Shaped units are made to order, so this is the longest stretch and the one we can’t compress. Standard rectangular units arrive in half the time. We give you a realistic install window here rather than a guess, because a bad date is worse than an honest one.
Stage 5: Demo, set, seal, and trim (1 to 3 days)
Old units come out, openings get flashed and sealed, new units are set and shimmed, and the interior trim and exterior stucco patch go back. You’ll want to be present for the final walk so we can operate every sash together and confirm the seal and finish. Most jobs finish in a single day once we start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Frame material: Vinyl is the value pick, holds up well in Kendall’s humidity, and costs less. Aluminum is stronger for large spans and wide arches. Wood gives you a warmer interior look, but it needs real maintenance in this climate.
- Glazing: Standard insulated glass vs. impact-rated laminated glass. Given the HVHZ code environment here, most Kendall homeowners go impact-rated, which also handles the hurricane question upfront.
- Shape complexity: A single arch over a front door is straightforward. A half-round, an eyebrow, an oval, or a trapezoid in the same facade raises fabrication cost and the risk of a measurement error.
- Grille pattern: A true divided-light or simulated divided-light in a shaped unit adds detail and cost. Simulated grilles between the glass panes are the practical choice for arched windows.
- Finish: Factory-baked color holds up far better than field-painted frames in salt air. Pick the finish from the factory palette and you avoid repainting in three years.
- Trim and surround: Stucco return, wood casing, or a shaped surround. The surround is what makes a geometric window read as intentional.
What Custom & Geometric Windows Cost in Kendall, FL
Expect $800 to $2,500 per shaped opening for the unit itself, and $4,500 to $15,000 for a typical package of six to ten windows mixing geometric and standard shapes. Those are the market-calibrated ranges we quote across Kendall, FL. In a full package with impact glazing and a whole-home scope, see Windows & Doors in Kendall for the broader project.
The five variables that push a job from the low end to the high end:
- Number and shape of openings: Each unit has its own fabrication and permit line item. Odd shapes add cost.
- Glazing and code compliance: Impact-rated laminated glass and the required product approval cost more than standard insulated glass.
- Frame material and finish: Aluminum and wood run higher than vinyl, and a factory-baked color adds a line.
- Existing condition: Rotten framing, cracked stucco, or out-of-square rough openings mean repair before install.
- Access and height: Second-story work or tight side-yard access adds labor and equipment.
A written estimate from us lists the units, the glazing spec, the permit fee, the labor, and the trim and seal by line. It does not include unforeseeable structural repair; if we open a wall and find rot, we quote it before we proceed, never after.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall Homes Do to This Job
Kendall is a fully developed, unincorporated Miami-Dade community west of the Turnpike, which means nearly every Custom & Geometric Windows project here is a retrofit into an already-improved lot rather than a new build. The housing stock is mostly 1970s-to-1990s CBS concrete block, single-family, with barrel-tile or shingle roofs, plus a ring of newer townhomes and mid-rises along Kendall Drive. Most of the homes we work on have original or first-replacement windows, and the openings aren’t always square after forty years of stucco movement and Florida heat. On the coastal air and hurricane code side, every unit needs the county’s product approval for the design pressure of the opening, and the paperwork question comes before the price question for most Kendall homeowners. After a tropical storm or a summer microburst, we get calls about soffit and fascia damage around the same time word spreads in the tract neighborhoods, and that’s exactly when people start asking whether the contractor pulls the Miami-Dade permit and carries the HVHZ approvals. We do both, and we schedule the inspection as part of the job.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Kendall
Plan on 8 to 12 weeks from signed contract to installed units, mostly because shaped units are made to order and the Miami-Dade permit review takes 2 to 4 weeks. Call (844) 761-9356 for an exact timeline on your openings.
Yes. Miami-Dade County requires a permit for window replacement, and shaped units need a product approval on file that matches the opening. We pull the permit and handle the inspection as part of the job.
In most cases, yes. A replacement geometric unit goes into an existing rough opening. Reshaping an opening to a new size, which means cutting block and re-heading, is the case where structure moves and framing gets added.
Roughly $800 to $2,500 per shaped opening, and $4,500 to $15,000 for a typical multi-window package. Call (844) 761-9356 for a written estimate with the units, permit, and trim broken out line by line.
The 730-Day Done Right Promise covers workmanship: if it’s not done right, we make it right. Material warranties come from the manufacturer, and you’ll see both in writing before you sign.
Get a Free Estimate on Custom & Geometric Windows in Kendall
Call (844) 761-9356 to schedule a free on-site estimate for Custom & Geometric Windows in Kendall, FL. We’ll measure the openings, talk through shapes and glazing, and hand you a written line-item price. If you’re planning a broader upgrade, our Windows & Doors service and the Kendall service area give you the full picture. Homeowners often pair this with Concrete Driveways & Concrete Work in Kendall or Asphalt Driveways & Resurfacing in Kendall. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.