Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Kendall, FL: What the Job Actually Involves
Window installation in Kendall usually runs $4,500 to $15,000 for a full-home replacement, and a typical 8 to 14 window job takes one to three days on site once materials land. The work is a permit-driven sequence in Miami-Dade County: measure and product approval first, demolition and framing prep second, glass and flashing third, inspection last. Call (844) 761-9356 and we’ll walk your specific windows and give you a written range before anyone touches a sill.
How We Run a Window Installation, Stage by Stage
Most contractors blur the process into “we handle everything.” That tells you nothing. Here’s the actual order of operations we follow on a Kendall window installation, and where you make decisions.
Stage 1: Field measure and product approval (days 1 to 5)
We measure every rough opening, not just the visible glass. In CBS homes the opening is often out of square by a quarter inch or more, and that changes the frame spec. This is also where the paperwork starts: Miami-Dade requires a product approval or NOA number for the window unit before the permit clears. You decide the product line and glass package here, because the approval number follows the product, not the other way around.
Stage 2: Permit submittal and inspection scheduling (days 5 to 20)
We pull the permit and submit the product approvals. In Kendall this step, not the carpentry, is usually the long pole. County review plus inspection scheduling can eat two to three weeks depending on volume. You sign the permit application and, if you’re in an HOA, get the exterior change approved in parallel. Skip the HOA step and you can install a perfectly legal window the association makes you change.
Stage 3: Protection and demolition (day 1 on site)
Furniture gets moved and covered, floors get drop cloths, and we pull the old sashes and frames. On a 12-window job that’s a full day for two installers. You’ll want to decide whether you’re staying in the house; with the openings exposed you’ll have airflow and some dust, and we sequence the removal so bedrooms aren’t open overnight.
Stage 4: Setting, flashing, and sealing (days 2 to 3)
New units go in, shimmed and squared, then flashed at the head and sill and sealed with the right sealant for stucco and block. This is the stage that decides whether you get a leak in year three. We don’t rush it. Trim and interior casing go on the same pass so you’re not looking at raw openings for a week.
Stage 5: Inspection and punch list (final day)
The county inspector signs off, then we walk the job with you: operation, locks, screens, sealant lines, and touch-up. Anything on the punch list gets scheduled before we call the job closed. Our 730-Day Done Right Promise covers the workmanship for two full years, so if a seal fails or an operator drags, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Window installation is mostly a spec decision. Here’s what moves the job, with the honest trade-off on each.
- Frame material: vinyl vs. aluminum vs. wood-clad. Vinyl is the value play and handles Kendall humidity well, but it expands and contracts and the color choices are limited. Aluminum is strong and slim-profile, common on older Kendall homes, but it conducts heat. Wood-clad (Andersen and Marvin are the names homeowners ask for) looks best on the street and insulates well, at roughly 30 to 50 percent more than vinyl.
- Glass package. Standard dual-pane is fine. Low-E and laminated glass add cost but cut heat gain and noise from Kendall Drive traffic. In this climate the upgrade usually pays back on cooling bills.
- Impact-rated vs. non-impact. Impact glazing runs higher per unit but can reduce insurance premiums and skip the shutters. Non-impact is cheaper up front and requires storm protection. We quote both so you see the real spread.
- Operating style. Fixed, single-hung, casement, awning, and sliders all price differently. Casement and awning units cost more than single-hung because of the hardware.
- Brand and warranty. We work with lines like Mr-Glass and Therma-Tru where they fit the opening and the budget. The manufacturer warranty is only as good as the installer behind it, which is why our own coverage sits on top.
What Window Installation Costs in Kendall, FL
Plan on $4,500 to $15,000 for a whole-home window installation in Kendall. Impact-rated window installation runs $8,000 to $25,000, and that’s the number most Kendall homeowners end up quoting because of hurricane-season exposure. Per-unit, non-impact typically lands $400 to $900 installed and impact $700 to $1,500, depending on size and glass.
Five variables push a job toward the low or high end:
- Window count and size. A 6-window job and a 20-window job are different projects. Oversized openings cost more in glass and framing.
- Existing condition. Rot, cracked stucco, or a prior bad install means repair work before the new unit goes in.
- Glass and impact rating. The single biggest swing. Impact glazing can add thousands across a house.
- Frame material. Wood-clad over vinyl is a real premium.
- Permit scope. A like-for-like swap is simpler than resizing an opening, which touches structure and inspection.
A written estimate from us lists units, glass, trim, permit fees, and labor line by line. What it won’t hide: if we find rot behind a frame, that’s quoted as an add before we proceed, not sprung on you at the end. Upfront pricing means the number you see is the number you pay. Call (844) 761-9356 for a free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall Homes Specifically Do to This Job
Kendall is a fully built-out corner of unincorporated Miami-Dade west of the Turnpike, so nearly every window installation here is a retrofit into a 1970s-to-1990s CBS home, not new construction. That changes the job in ways a generic page won’t tell you. The original openings in these block houses are often slightly out of square, the stucco around them has 30-plus years of sun and salt on it, and pulling a frame frequently reveals old flashing that has to be rebuilt. The county’s Hurricane Verified Home product approval requirement means the window unit itself needs an approval number before the permit clears, which is why we ask about product before we ask about price. Around the tract neighborhoods off Kendall Drive and 88th Street, we see the same pattern: louvered or single-pane 1980s windows that whistle in a summer microburst, and homeowners who’ve already been through one storm-season scare. After a tropical system passes, the call volume here spikes toward impact retrofits. If your window installation is part of a full exterior refresh, it pairs naturally with our Windows & Doors in Kendall work and our broader Windows & Doors service. We cover the whole area through our Kendall page, and homeowners often pair this with a Wood Fence in Kendall or a Chain Link Fence in Kendall when they’re redoing the yard at the same time.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Window Installation in Kendall
Most Kendall window installation jobs take one to three days on site, but the full timeline from contract to final inspection is usually three to five weeks because Miami-Dade permit review and inspection scheduling add time. Call (844) 761-9356 and we’ll give you a realistic schedule for your window count.
Yes. Miami-Dade County requires a permit and a product approval number for window replacement, and the inspector checks it. We pull the permit and handle the submittal and inspection. Skipping it creates a problem when you sell or insure the house. Call (844) 761-9356 to start the permit conversation.
Our written estimate is fixed for the scope we quote. If we open a wall and find rot or failed flashing that wasn’t visible, we quote that repair before doing it, never after. No surprise line items. Call (844) 761-9356 for an upfront written price.
In most cases, yes. A like-for-like window installation keeps the same opening, so plumbing and structure stay untouched. Resizing an opening is a larger scope that touches framing and inspection. We’ll tell you which one your job is during the measure.
Every window installation we do is covered by our 730-Day Done Right Promise on workmanship, on top of the manufacturer warranty on the unit. That means two full years of coverage for leaks, seals, and operation. Call (844) 761-9356 to schedule your free estimate.
Get a Free Window Installation Estimate in Kendall
If you’re pricing window installation in Kendall, the next step is a free on-site estimate. We measure your openings, check the existing flashing and stucco, and hand you a written line-item price with the permit fees spelled out. Our technicians have up to 12 years of experience and every job is background-checked and covered by the 730-Day Done Right Promise. Call (844) 761-9356. A live person answers, day or night.
Written by the team at Groundwork Construction Co.