Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Kendall, FL: What It Costs and How Long It Takes
Most metal roofing projects on Kendall homes land between $15,000 and $40,000, and a typical single-family re-roof takes four to seven working days from tear-off to final inspection. The spread comes down to square footage, whether the old roof gets a full tear-off, panel type, and how much Miami-Dade permitting paperwork the job carries. Call (844) 761-9356 to schedule a free on-site estimate. You’ll get a written line-item quote with the panel profile, underlayment, and attachment schedule spelled out before anyone touches your roof.
How Our Metal Roofing Process Actually Runs, Day by Day
Metal roofing is less forgiving than shingle work, and the sequence matters more than the speed. Here’s what a Kendall job looks like from our side of the ladder.
Day 1: Tear-off and deck inspection
We strip the existing barrel tile or shingles down to the deck. On 1970s and 1980s CBS homes around Kendall, that’s also when we find out what the last re-roof hid: soft plywood, rusted nails, and sometimes two layers of shingle the prior crew never removed. You decide nothing on day 1 except whether to replace damaged decking as we find it, and we price that per sheet in writing before any of it comes off.
Day 2: Re-decking and underlayment
Bad decking comes out, new plywood goes down, and the peel-and-stick underlayment gets rolled over the whole field. This is the invisible 80% of a metal roof. In Kendall we spec a high-temp self-adhered membrane, not felt, because the attic heat in July and August will cook a cheap underlayment into powder in a few years. You pick the underlayment tier and approve it before we open the first roll.
Day 3: Flashing, drip edge, and panel layout
This is the day the roof either holds water for 30 years or starts leaking at every penetration. Valleys, chimneys, skylights, and the fascia get flashed and sealed. We snap the panel layout so seams land where the wind uplift calculations want them, not where the panels happen to land.
Days 4-6: Panel installation and fastener schedule
The panels go up and every fastener gets set to a torque spec, not just driven flush. Exposed-fastener panels need the screws in the flat of the rib and never over-tightened; standing seam panels get concealed clips. You’ve already chosen which system fits your budget at the estimate, so this stage runs without a decision from you.
Final day: Trim, inspection, and walkthrough
Ridge caps, gable trim, and end walls close out. Then the Miami-Dade County inspection happens before we call the job done, and we walk the roof with you and hand over the Notice of Acceptance (NOA) paperwork and your warranty. Nothing gets covered up until it’s been photographed and inspected.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
Four real decisions drive both the look and the price of a Kendall metal roof. Here’s the honest trade-off on each one.
- Standing seam vs. exposed-fastener panels. Standing seam is the cleaner, longer-lived choice, with concealed clips and no screws punching through the panel face. It’s the high end of the $15,000 to $40,000 range. Exposed-fastener panels like a 5V or corrugated profile cost less and still perform, provided the screws are gasketed and set right. The trade-off is that every exposed screw is a future service point.
- Panel gauge and finish. A 26-gauge panel resists hail and windborne debris better than 29-gauge, and it’s what we recommend for a home in the HVHZ, where wind-driven debris during hurricane season is a real hazard. A Kynar-type painted finish holds its color far longer in salt air than a basic mill finish. The step up in gauge and finish is where most of the mid-range price lives.
- Color and profile. A darker standing seam in a charcoal or slate reads modern and hides streaking from rain runoff; a lighter color reflects heat and keeps the attic cooler in the Miami subtropical sun. This is the choice with the least cost impact and the most visual impact, so take your time on it.
- Overlay vs. full tear-off. A metal roof can sometimes go over an existing shingle layer with a purlin system, saving tear-off cost. In Kendall we lean toward full tear-off, because the 1970s-90s decks we open frequently have hidden water damage, and covering it up just buries the problem under a new roof.
What Metal Roofing Costs in Kendall, FL
Kendall metal roofing generally runs $15,000 to $40,000 for a full residential job. That’s the whole installed number, not a per-square teaser. Five things push a project toward the low end or the high end:
- Roof size and pitch. A 1,500-square-foot roof sits at the bottom; a steep, cut-up roof with multiple valleys sits at the top. Complex cuts add labor and metal waste.
- Existing roof condition. A clean deck keeps the number honest. Rotted plywood, a second layer to strip, or failing fascia adds to the tear-off and re-decking line.
- Panel system and gauge. Exposed-fastener in 29-gauge is the budget choice; standing seam in 26-gauge with a premium finish is the top.
- Penetrations and flashings. Skylights, chimneys, and multiple roof-to-wall junctions in a CBS home each add a flashing detail.
- Permit and inspection scope. Miami-Dade County permitting and the HVHZ product-approval review add paperwork and inspection time, and that’s built into our quote, not into a surprise change order later.
A written estimate from us includes the tear-off, re-decking allowance, underlayment, panel system, flashing, permit, and disposal. It typically does not include structural repairs if the deck or rafters turn out to be failing once they’re exposed, or gutter replacement, which is a separate job. We price those line by line so you always see what’s in and what’s out. Call (844) 761-9356 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall Homes Specifically Do to a Metal Roofing Job
Kendall is a fully built-out corner of unincorporated Miami-Dade west of the Turnpike, and nearly every roofing job here is rebuilding an already-improved lot rather than a new build. Most of the homes we work on are 1970s-to-1990s concrete block (CBS) single-family houses, many still carrying the original barrel-tile or shingle roof, with a ring of newer townhomes along Kendall Drive and the east side. When we open one of those older decks, we routinely find two things the homeowner never saw: a second shingle layer from a prior re-roof, and soft plywood along the valleys where the salt-laden coastal air and afternoon downpours have been eating at the deck for a decade. The paperwork question comes before the price question here too. Homeowners in The Crossings and Three Lakes will ask up front whether we pull the Miami-Dade permit and whether the panels carry a Florida Product Approval or a county NOA, and the answer is yes to both, every time. Metal Roofing on these homes also means scoping the roof-to-wall attachment so the panels stay put through a hurricane-season microburst, not just a calm spring afternoon. If the metal roof is part of a full Roofing in Kendall plan that also touches fascia and soffits, let’s talk through it together.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Metal Roofing in Kendall
Four to seven working days for a typical single-family home, once permits are in hand. Permit turnaround with Miami-Dade County is a separate wait, and we start the paperwork the day you sign. Call (844) 761-9356 to get your estimate scheduled.
Yes. A re-roof requires a county permit, and the panels must carry a Florida Product Approval or county NOA to pass inspection. We pull the permit and schedule the inspection for you, and we never hand you a roof that isn’t inspection-ready. Call (844) 761-9356 with your address for a permit-friendly quote.
In most cases yes. Metal roofing sits on the existing deck, so plumbing vents and rafters stay where they are unless we find rot. The exception is a deck that’s failed under the old roof, which we only know once the tear-off exposes it. Call (844) 761-9356 for a free deck inspection and a written scope.
Between $15,000 and $40,000 installed, depending on roof size, panel system, gauge, finish, and existing deck condition. A standing seam roof in 26-gauge with a premium finish sits at the top; an exposed-fastener panel on a simple roof sits at the bottom. Call (844) 761-9356 for a free, line-item exact quote.
Every metal roof we install is covered by our 730-Day Done Right Promise on workmanship, on top of the manufacturer’s panel finish warranty. If something we installed fails, we make it right within that window. You’ll get the warranty terms in writing with your estimate. Homeowners near Richmond Heights and Sunset often pair this with Impact Windows & Doors in Kendall to harden the whole exterior at once, or with Window Replacement in Kendall for the interior rooms. Call (844) 761-9356 to talk through the whole scope.
Schedule Your Free Metal Roofing Estimate in Kendall
Call (844) 761-9356 to book a free on-site estimate for metal roofing in Kendall. On the call, we’ll confirm your address in 33176, note the current roof type, and set a time to walk the roof and measure. Then you get a written line-item quote with the panel system, underlayment, permit, and inspection built in. Our roofing service is part of what we do across Kendall, and our experienced technicians arrive background-checked and in uniform. Read more about our Roofing work, and call when you’re ready to price the job.
Written by the team at Groundwork Construction Co..