Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Richmond Heights, FL: What the Job Really Involves
Vanities, tile and fixtures in Richmond Heights, FL typically run $9,000 – $28,000 when you’re changing the layout and finish package together, and most of that work moves from demo to final walkthrough in three to five weeks. The parts that drive cost are the same everywhere: how much wall and floor tile gets replaced, whether plumbing or electrical gets relocated, and how high you go on the slab, stone and fixture grade. Call (844) 761-9356 and we’ll price your exact room against Richmond Heights labor and material costs, not a generic number pulled from a website.
How We Run a Vanity, Tile and Fixture Job, Stage by Stage
Most contractor headaches on this kind of work come from sequence problems, not from bad materials. Here’s the order we actually work in.
Stage 1: Site visit and written scope (days 1 – 3)
We measure the room, check how the existing vanity is tied to the wall, and look at what’s under the floor tile. On a Richmond Heights concrete block ranch, that means confirming whether you’re laying over the original slab or setting new backer over it. You leave this stage with a written, line-item scope: tile square footage, vanity size and style, fixture list by brand, and a fixed number.
Stage 2: Protection, demo and rough-in (days 3 – 7)
We mask the rest of the house, pull the old vanity, tile and fixtures, and haul it out. If the plan moves the sink or adds a second vanity, this is when plumbing gets roughed in and the electrical for vanity lighting or an outlet inside the cabinet gets run. Tile substrate goes down at the end of this stage so it can cure.
Stage 3: Waterproofing and tile setting (days 7 – 14)
Floor tile and any wall tile get set over a properly primed and waterproofed substrate. You’ll have already picked your tile and grout at this point, because grout joints and layout get locked before a single piece is cut. Layout is where a cheap job shows: we center the tile on the room’s most visible sightline, not wherever the last full piece lands.
Stage 4: Vanity, countertop and fixtures (days 14 – 21)
The vanity cabinet goes in and gets shimmed and secured to the wall, then the top is templated or field-measured, depending on material. Sink, faucet, mirror, vanity lighting and towel bars follow. Every fixture gets checked for alignment and flow before it’s signed off.
Stage 5: Grout, seal and walkthrough (days 21 – 28)
Grout cure, silicone at every wet joint, a final seal on natural stone, then a walkthrough with you in the room. We note anything that needs adjustment and handle it before we call the job done. Your workmanship is covered under our 730-Day Done Right Promise, so a loose faucet or a grout line that opens up two months later is a callback we take, not a bill we send.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make: Materials, Finishes and Fixtures
- Vanity cabinet construction: MDF with a factory finish handles humidity well and keeps the budget friendlier. Plywood boxes cost more but hold up longer in a Florida bathroom. KraftMaid has options in both camps, and we’ll walk the trade-off with you.
- Countertop material: Cultured marble is the value pick at the low end. Quartz like Cambria is where most Richmond Heights buyers land for stain resistance and a cleaner look, and natural stone costs the most with the most maintenance.
- Floor tile: Porcelain is the honest default, durable and easy to clean. Large-format (24×24 and up) looks roomier but needs a flatter substrate, which can add prep cost on an older slab. Natural stone tile costs more to set and more to seal.
- Wall tile and shower surround: Subway tile stays affordable; a full slab or large-format porcelain costs more but cuts grout lines. Walk-in shower replacement is its own job, so if you’re going that far, we’ll scope it separately.
- Fixtures: Kohler and similar lines get you matched finish across faucet, shower trim and accessories. Mixing brands saves money but shows on finish variation.
- Glass and shower doors: Frameless glass is where customers usually upgrade. A Mr-Glass panel pairs cleanly with the fixtures and finishes in this scope.
What Vanities, Tile & Fixtures Cost in Richmond Heights, FL
Most complete vanity, tile and fixture packages in Richmond Heights land between $9,000 and $28,000, and a single vanity swap with tile repair on the surrounding floor sits in the $800 – $3,000 range for the vanity alone. Here’s how the spread breaks down:
| Line item | Typical range |
|---|---|
| Bathroom vanity installation | $800 – $3,000 |
| Floor and wall tile | $1,500 – $9,000 |
| Fixtures and hardware | $600 – $4,000 |
| Plumbing or electrical relocation | $500 – $3,500 |
| Full room, all-in | $9,000 – $28,000 |
What pushes a job to the high end: relocating the sink supply and drain, adding a second vanity, a large-format tile pattern, natural stone, and any structural change to the wall behind the vanity. What keeps it low: keeping the plumbing in place, porcelain tile over the existing footprint, and a standard vanity size.
Your written estimate spells out tile square footage, vanity and top spec, fixture list and haul-away. Items we price separately if you want them: shower surround replacement, glass enclosures, and any drywall or paint outside the immediate footprint. The price you see on the estimate is the price you pay; we don’t do change orders that creep.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond Heights Homes Specifically Do to This Job
Richmond Heights has a housing mix that most contractors get wrong. Half the lots hold 1950s – 70s concrete block ranches on slabs, and the other half are incremental rebuilds where additions or second stories sit right against the older walls. Terrazzo and original tile are common under old flooring, so a vanity and tile job here often starts with a decision: oil the terrazzo and tile around it, or demo down to slab and start fresh.
That concrete block also means plumbing relocation isn’t a quick drill. Chasing a new supply line through block is slow work and drives cost on any layout change. Then there’s the water table and the summer downpours in this ZIP (33176): we’re careful about moisture barriers under the new tile and check the sill and wall along the shower or tub wall for any past water intrusion before closing things up. Older slabs here sit close to limestone, so a dropped floor drain or a plumbing move that goes below grade can hit rock sooner than in Kendall or Pinecrest. And because the core of Richmond Heights is a historically Black community with a tight mix of longtime owners and new infill buyers, we schedule and communicate the same way for a $9,000 vanity package as we would for a $28,000 full-room rebuild. We cover all of Richmond Heights, including the streets off the main corridors through the 33176 side.
If the tile and fixtures are part of a bigger scope, that’s a conversation we’ll have with you under our Bathroom Remodeling in Richmond Heights page. Homeowners often pair the project with Tile Roofing in Richmond Heights when the same walkthrough turns up roof issues, and occasionally add Specialty Roofing in Richmond Heights at the same time. Outside the room, our Bathroom Remodeling service covers the full-scope work, and you can see all the cities and streets we work on our Richmond Heights service area page.
Serving Richmond Heights, FL – Our Local Coverage Area
We serve Richmond Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vanities, Tile & Fixtures in Richmond Heights
Most complete packages take three to five weeks from demo to final walkthrough, with tile cure and cabinet lead time driving the spread. A vanity-only swap with minor tile repair is often a two- to three-day job. Call (844) 761-9356 to get a realistic schedule for your room.
A like-for-like vanity and tile replacement usually doesn’t trigger a permit. Moving plumbing, adding a circuit for lighting or a GFCI outlet, or altering the wall typically does. We pull what’s required and coordinate the inspection; call (844) 761-9356 and we’ll tell you what your scope requires before any work starts.
Yes, in most Richmond Heights bathrooms. If the new vanity is the same size and the sink and drain stay put, plumbing doesn’t need to move, and the tile can go right back in the same footprint. If you want a different vanity length or a second sink, that changes the scope and the price, so call (844) 761-9356 to talk it through first.
Most jobs here land in the $9,000 – $28,000 range, and a standalone vanity installation without tile work runs $800 – $3,000. The variables that move the number are tile square footage, plumbing relocation, and the grade of vanity, top and fixtures you choose. Call (844) 761-9356 for an exact written estimate: free, line-item, and no pressure.
Every vanity, tile and fixture project we finish is covered by our 730-Day Done Right Promise; if something we installed isn’t right, we come back and make it right. Manufacturer warranties on vanities, faucets and glass go to you directly. Call (844) 761-9356 and we’ll put the coverage in writing before we start.
Get a Free Estimate for Vanities, Tile & Fixtures in Richmond Heights
Tell us your room size, what you want to change, and whether the plumbing stays put. Call (844) 761-9356 and a live person answers, day or night. We’ll set a free on-site estimate, give you a written line-item price with no surprises, and show you what the 730-Day Done Right Promise covers before you commit. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.