Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Kendale Lakes, FL: What It Costs and How Long It Takes
An aluminum fence in Kendale Lakes typically runs $4,000 to $10,000 installed, and most residential jobs are finished in two to four working days once the permit clears Miami-Dade County. Aluminum is the pick here because it won’t rot, won’t feed termites, and holds its powder-coat finish through the UV and summer storms that chew up wood and cheaper metal. Call (844) 761-9356 for a free on-site estimate.
How an Aluminum Fence Goes In, Start to Finish
Five stages, and you’ll know which one you’re in at any point. Here’s the real sequence, not a brochure version.
Stage 1: Site visit and layout (day 1)
We walk the property line, confirm where the fence actually goes, and check what’s under the ground before anyone digs. In 33183 you’ll sometimes hit irrigation lines, old paver edging, or the corner of a septic field, and those change the plan. You’ll decide the run, the gate positions and the height at this meeting. Expect 45 minutes to an hour.
Stage 2: Permit and utility check (1 to 3 weeks, the part people forget)
Anything over a low decorative run generally needs a Miami-Dade County fence permit, and the county wants a survey or site plan showing setbacks. We handle the submittal and the inspection scheduling; you sign and pay the fee. Utility locates get marked before we dig, which is free and non-negotiable on our end.
Stage 3: Setting posts (day 2, the real skill)
Aluminum fences fail at the post, not the panel. We dig to depth, set posts in concrete, and check plumb and line on every single one. In Kendale Lakes’ sandy, high-water-table soil, post depth and concrete mix matter more than the panel brand. This stage is one long day for a typical backyard run.
Stage 4: Panels, rails and gates (day 3)
Concrete cures, then panels and rails go on, gates get hung and adjusted. Gate hardware is where cheap jobs show themselves within a year, so we set hinges and latches to swing true and latch clean. You’ll test every gate with us before we call it done.
Stage 5: Final walk and cleanup (day 4, or same day as stage 4)
We haul off spoils, rake the line, and walk the whole run with you. This is where the 730-Day Done Right Promise gets explained in plain terms: if a post heaves or a gate sags from our workmanship, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Aluminum isn’t one product. These are the real forks in the road, with the honest trade-off on each.
- Residential vs. “pool code” pickets. Standard residential panels have wider picket spacing. If the fence encloses a pool, Florida pool safety rules require closer spacing and a self-closing, self-latching gate. Pool code costs a bit more per linear foot and it’s not optional once a pool is inside the run.
- Picket vs. flat-top vs. pressed-point. Picket and flat-top are the clean, quiet looks that suit the CBS ranch homes around here. Pressed-point (spear-top) costs more and reads more decorative. Pick by how the fence sits against your stucco, not by catalog photo.
- Grade and gauge. Thicker-wall aluminum holds up better against a weed trimmer and a wind gust. The lighter gauges save money up front and show dents and wobble sooner. On a corner lot exposed to open wind, spend on the heavier gauge.
- Finish and color. Powder-coated black is the default and the most forgiving. Bronze and white are common; custom colors cost more and take longer to arrive. Powder coat beats paint every time in this climate.
- Height and gates. Four-foot is typical for a property line, five-foot for privacy-minded backyards, and a driveway gate is a separate cost from a walk gate. Decide gate count early; adding one later means new posts.
What Aluminum Fence Costs in Kendale Lakes, FL
Plan on $4,000 to $10,000 for a residential aluminum fence in Kendale Lakes, installed. Most single-family backyard runs land in the $5,000 to $7,500 middle. Here’s what pushes a job toward the low or high end:
- Linear feet. The single biggest driver. A modest side-yard run and a full perimeter are different budgets entirely.
- Gate count and type. Each gate adds hardware and fabrication. A wide double driveway gate costs meaningfully more than a walk gate.
- Picket spacing and code. Pool-code spacing and self-latching hardware add cost, and there’s no way around it if a pool is enclosed.
- Grade and finish. Heavier gauge and custom colors move the number up. Standard black in a mid-grade panel keeps it down.
- Site conditions. Root-bound lines, old concrete footings to break out, or a run that crosses a slope all add labor.
Your written estimate is line-item: linear feet, gate schedule, hardware, permit fee and cleanup, with the number you see being the number you pay. What’s typically not in it: the county permit fee itself (we pass it through at cost), surveying if the property line isn’t clearly marked, and any concrete cutting for a run that crosses a driveway. Ask for those up front so nothing surprises you.
See the difference
Before
After
Before
After
Before
AfterWhat Kendale Lakes Homes Specifically Do to This Job
Kendale Lakes is a build-out Kendall subdivision, not new ground. Nearly every aluminum fence here is going onto an already-finished lot around a 1970s-to-1990s concrete block and stucco home, which means we’re working around established landscaping, irrigation, and property lines that have shifted a little over decades. That’s the honest reality: this is redoing Kendall, not building it.
The stock matters for fences. Those CBS ranch homes often have a screened lanai and an attached garage, and homeowners usually want the aluminum to tie the lanai edge and the side yard into one clean run. The subtropical heat, hard summer UV, and hurricane-season wind are exactly why aluminum beats wood here; powder coat holds its color while wood warps and fades. If your project turns into more than a fence, homeowners often pair this with Driveway Repair & Replacement in Kendale Lakes or new Patios, Walkways & Pool Decks in Kendale Lakes while the crew is on site. We cover the whole Kendale Lakes area in 33183, and if you’re thinking bigger, this is a natural part of a full Fence Installation in Kendale Lakes plan.
Serving Kendale Lakes, FL – Our Local Coverage Area
We serve Kendale Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Kendale Lakes
Two to four working days on site for a typical residential run, with one to three weeks ahead of that for the Miami-Dade permit. The install itself is fast; the permit and utility locates are the slow part. Call (844) 761-9356 to get a real timeline for your lot.
Usually yes, for anything beyond a low decorative run, and Miami-Dade County wants a site plan showing setbacks. We handle the submittal and inspection scheduling so you’re not chasing the county yourself. Call us to confirm what your specific run needs.
Almost always, yes. Aluminum posts go into dug holes set in concrete, not a poured footing wall, so we work around your landscaping and irrigation rather than demoing the yard. If a run crosses an irrigation line or old footing we break it out and tell you before it adds cost.
Roughly $4,000 to $10,000 installed, driven by linear feet, gate count, picket spacing and gauge. Pool-code fencing and wide driveway gates push toward the top. Call (844) 761-9356 for an exact written estimate; estimates are free.
Our workmanship and post-setting are covered by the 730-Day Done Right Promise, and the panel finish carries its own manufacturer warranty. The panels typically outlast the posts, which is why we set posts the way we do. Ask us to spell out both in writing on your estimate.
Get a Free Aluminum Fence Estimate in Kendale Lakes
Call (844) 761-9356 for a free on-site estimate on your aluminum fence in Kendale Lakes. A live person answers around the clock, so you’ll get a real appointment, not a voicemail. We’ll walk the line, confirm what the county needs, and hand you an upfront written number with no surprises. See our full fence installation service for the wider scope, and let’s get your yard fenced right, backed in writing.
Written by the team at Groundwork Construction Co.