Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Kendall West, FL: What It Costs and How the Job Runs
An iron fence in Kendall West typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are built in two to four working days once the layout and permit are settled. You get a buried posts, a level run on undulating 33193 lots, and a finish that survives salt air and hurricane-season wind. Call us at (844) 761-9356 to book a free on-site estimate; the number you see on the written quote is the number you pay.
How We Build an Iron Fence Here, Stage by Stage
An iron fence isn’t a truck-and-a-weekend job. On the lots we see in Kendall West, it’s a measured build with a set order, and knowing the order is how you keep surprises off the invoice.
Stage 1 – Site visit and layout (day 1, about 60-90 minutes). We walk the property line, confirm where the fence runs, and check for irrigation lines, pool plumbing, and drainage swales. On western-edge 33193 lots that back up to the Everglades buffer, the setback line matters, so we measure from the plat and flag anything that has to clear a drainage easement. This is where you decide the run: full perimeter, front-only, or side-yard return to the house.
Stage 2 – Written estimate and permit check (day 1-3). You get a line-item quote: footage, post count, gate count, finish, and any concrete or demo. Fence permits in unincorporated Miami-Dade are handled through the county, and we confirm whether your run triggers one, usually on corner lots or where the fence sits in an easement. Nothing gets ordered until you approve the number in writing.
Stage 3 – Demo and prep (day 2, half a day). If there’s an old fence, it comes out, posts and all, and we haul it off. Post holes get dug to depth and set in concrete, typically 24 to 30 inches, deeper than the shallow limestone-and-sand mix in some interior Kendall yards needs. You don’t have to be home for this; we photograph the layout before we set anything.
Stage 4 – Build and set (days 2-3). Posts cure, panels go up, and gates get hung with their hardware. Most runs of 150 to 250 linear feet go in on this stage. This is the point where you confirm gate swing direction and where the latch sits. Want a keyed lock or a self-closing hinge? Decide it now, not after the gate is hung.
Stage 5 – Walkthrough and finish (day 3-4). We walk the run with you, check plumb on every post, gate clearance, and finish touch-ups, then hand off the paperwork. The whole build is backed by our 730-Day Done Right Promise: if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Iron fence covers a few real product families, and the choice moves both price and how the fence ages in South Florida sun and rain.
- Wrought iron, true forged: The heaviest, most traditional look, with hand-forged pickets and scroll detail. It’s the top of the range and the most expensive to build. Best for a formal front run where curb appeal is the whole point.
- Steel ornamental (tubular): The workhorse for residential lots. Steel pickets, welded or racked panels, powder-coated finish. Holds up well against hurricane-season wind and is the most common choice on Kendall West homes. Cost sits in the middle of the range.
- Aluminum ornamental: Lighter and rust-resistant, powder-coated, and the friendliest budget option. It reads similar from the street but has less heft; if you want the iron look without the weight, this is the honest alternative.
- Finish and color: Black is standard and hides touch-ups best. Bronze, forest green, and custom colors cost more and show scratches sooner. Powder coat beats field paint every time in this climate.
- Configuration: Picket spacing, post caps, finials, and gate style all change the number. A single walk gate is one line; a double driveway gate with automation is a different job.
Wall-mounted or free-standing panels, and whether you tie into existing masonry, are decisions you’ll make at the site visit. Our Fence Installation service handles the full range if you’re weighing iron against other materials.
What an Iron Fence Costs in Kendall West, FL
Expect $3,500 to $9,000 for a residential iron fence in Kendall West, with most standard lots landing between $5,000 and $7,500. That lead range covers a typical front-and-side run with one walk gate; it moves up or down on five variables.
- Linear footage and gate count: The biggest lever. A 120-foot run with one gate sits near the low end; 250 feet with a double driveway gate pushes toward the top.
- Material grade: Steel ornamental sits mid-range; true wrought iron or heavy custom scrollwork runs highest. Aluminum is the budget-friendly end.
- Existing conditions: Tearing out an old chain link or wood fence, digging through roots, or working around pool equipment adds labor and disposal.
- Finish: Standard powder coat in black is included; custom colors, two-tone, and field touch-up add cost.
- Permit scope: A county fence permit on a corner lot or easement run adds a fee and a small scheduling buffer.
Your written estimate includes posts, panels, concrete, gate hardware, disposal of the old fence, and the permit if one is required. It doesn’t include landscaping repair around the footings or a paver border at the base, unless you ask for it up front.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall West Homes Specifically Do to This Job
Kendall West (33193) is a west-edge subdivision built out mostly from the 1980s through the 2000s, and the homes here are CBS with stucco walls. That matters for iron fencing because there are no century-old brick walls to tie into and no mature tree canopy to work around; the fence runs along clean, newer property lines, but the drainage swales along the western edge against the Everglades buffer demand careful placement. We routinely measure setbacks from the plat because those lots take strict drainage review, and a post in the wrong spot can foul a swale. HOA rules matter too: many of the villa and townhome communities here restrict fence height and color, and we confirm the architectural approval before the first post goes in. Hurricane-season wind-driven rain is the other driver, so we spec High-Velocity Hurricane Zone product approvals and powder-coated finishes rather than field-painted metal that chips and rusts. If you’re also reworking the yard, homeowners often pair this with Patios, Walkways & Pool Decks in Kendall West to finish the outdoor space in one pass.
Serving Kendall West, FL – Our Local Coverage Area
We serve Kendall West and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Kendall West
Most residential iron fence runs in Kendall West are built in two to four working days after the layout is approved. Permit wait time can add a few days on corner or easement lots, and we tell you the realistic window before we start. Call (844) 761-9356 for a schedule you can plan around.
Not always, but unincorporated Miami-Dade requires a fence permit on some runs, including corner lots and anything in a drainage easement. We check your plat during the site visit and pull the permit if it applies, so the finished run passes inspection the first time. Call for a free estimate and we’ll confirm your lot’s requirements.
Residential iron fence in Kendall West runs $3,500 to $9,000, with a typical front-and-side run with one gate landing near $5,000 to $7,500. Final price depends on footage, gate count, material grade, and whether an old fence has to come out. Call (844) 761-9356 for a written line-item quote; estimates are free.
Not on a properly scoped job. Our upfront pricing means the number on your written estimate is the number you pay, and any change, like adding a gate mid-build, gets approved in writing before we do it. That’s the whole point of the line-item quote.
Every iron fence we build is covered by the 730-Day Done Right Promise: if the workmanship isn’t right, we make it right. Material warranties come from the manufacturer and we hand those over at the walkthrough. Call (844) 761-9356 to talk through the coverage on your run.
Get Your Iron Fence Estimate in Kendall West
If you’re ready to price an iron fence in Kendall West, call (844) 761-9356 for a free on-site estimate. We’ll measure the run, check setbacks and HOA rules, confirm whether a permit is needed, and hand you a written line-item quote with no surprises. A live person answers the phone, day or night. Whether it’s a standalone fence or part of a full Fence Installation in Kendall West, we cover Kendall West and the surrounding area, and homeowners often pair this with ADU Design & Permitting in Kendall West when they’re reworking the lot.
Written by the team at Groundwork Construction Co.