Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Is a Curbless Shower? A Straight Answer for The Hammocks, FL Homeowners
A curbless shower is a shower with no raised threshold at its entrance – the bathroom floor and the shower floor are one continuous, gently sloped surface, with water directed to a linear or center drain instead of held back by a curb. In The Hammocks, that definition is the easy part. The hard part is that nearly every home here is a 1980s-to-2000s concrete-block (CBS) structure on a slab-on-grade foundation, so a curbless shower in The Hammocks, FL usually means cutting into 20-to-35-year-old concrete to create a recessed floor, then rebuilding the waterproofing to Miami-Dade standards. If you want a straight assessment of what your specific slab can take, call (844) 761-9356 and we’ll talk through it.
Why a Hammocks Slab Changes the Whole Conversation
Design blogs show you the finished shower: a glass panel, a wide tile field, no lip to trip over. What they leave out is the floor beneath it. In a new build, the plumber and the concrete crew frame a depression into the slab before the pour, so the shower floor sits a few inches below the bathroom floor and the tile slope runs to the drain without a step. Fast-forward to a tract home in The Hammocks built in 1992 or 1998, and there is no depression. Just solid slab.
So the retrofit job is different in kind, not just in degree. Someone has to saw-cut and core-drill the existing slab, break out a section, form a new recessed pan, and tie it back into the surrounding floor. Get the depth or the tie-in wrong and you’ve compromised a structural slab in a home that also has to survive hurricane-season wind-driven rain. That’s the part we’d want you to understand before anyone hands you a bid that says “curbless conversion, labor and materials.”
Here’s what we look for on the first walkthrough of a Hammocks home:
- Slab thickness and reinforcement. Tract-era pours vary. We check before we cut, because a thin pour changes the forming approach.
- Drain location. Moving a drain more than a couple feet in a slab means more cutting. A linear drain at the existing drain line often saves depth and disruption.
- Whether it’s new construction or retrofit. New builds get a formed depression. Retrofits get core-drilled and re-formed. The two aren’t priced the same and shouldn’t be quoted the same.
- Adjacent flooring. Tile-to-tile transitions are forgiving. Tile-to-vinyl or tile-to-carpet at a curbless edge needs a specific transition detail or you’ll feel it every morning.
Nearly every single-family home and low-rise townhome here is CBS with a stucco exterior, and interior reconfigurations of aging baths are exactly the second-generation work this subdivision was always going to need. Whole blocks hit the same milestone at once, because the Hammocks was mass-produced in a narrow window. When one neighbor finally pulls the trigger on a bathroom, the house two doors down is usually a year behind.
The Waterproofing Layer Miami-Dade Actually Inspects
This is where curbless designs separate the careful from the hopeful. A traditional shower has a curb doing backup duty – if the pan holds water a little long, the curb contains it. A curbless shower has no backup. Water management is entirely slope-dependent, which means the waterproofing membrane, the pre-slope, and the drain bond all have to be right the first time. There’s no forgiving margin.
Unincorporated Miami-Dade holds shower waterproofing to specific moisture and flood standards, and a curbless install raises the inspection bar because the whole assembly is doing the work the curb used to do covertly. In South Florida’s year-round humidity, a membrane that’s lapped wrong or a pan that ponds even a quarter inch doesn’t fail dramatically. It wicks. You find out two summers later when the baseboard on the far wall shows a stain and the slab is holding moisture it shouldn’t.
When we handle a curbless shower as part of a full Bathroom Remodeling project, the waterproofing is done by our own background-checked, uniformed technicians – not subbed out. That matters more than it sounds. Plenty of local general contractors cut the slab and then hand the membrane work to whichever sub is free that week, and the accountability disappears at the handoff. We keep it in-house and we back it in writing.
The Aging-in-Place Wave in This Zip Code
Homeowners who bought in The Hammocks in the 1990s are now in their 50s, 60s, and 70s. Many are remodeling the primary bath not for resale value but because a 6-inch curb is starting to look like a hazard. Curbless is the most requested aging-in-place upgrade in this zip code right now, and it’s easy to see why: no step to clear, no threshold to catch a foot, and a shower that works with a bench and a grab bar without looking clinical.
The catch is that accessibility and structure pull in opposite directions. A walker-friendly shower wants a wide, flat, open floor. A slab retrofit wants minimal cutting. Those are usually reconcilable, but only if someone plans the drain and the floor pitch around how you’ll actually move through the space. If you’re also weighing a tub-to-shower conversion, our guide to Bathroom Remodeling in The Hammocks covers the trade-offs on the same housing stock.
What a Curbless Shower Costs in The Hammocks
A full bathroom remodel in The Hammocks typically runs $9,000-$28,000, and the shower itself is the line item where curbless adds real cost. Core-drilling, re-forming a slab depression, and a bonded waterproofing membrane for a curbless pan add to the base shower price. Here’s how the numbers break down:
| Scope | Typical Range in The Hammocks |
|---|---|
| Walk-in shower installation (curbless or low-curb) | $4,500-$12,000 |
| Shower replacement (reusing existing drain) | $3,000-$8,500 |
| Tub-to-shower conversion | $3,500-$10,000 |
| Small bathroom remodel | $5,000-$12,000 |
| Full bathroom remodel | $9,000-$28,000 |
The shower numbers move with what the slab requires. A retrofit that can reuse the existing drain location sits at the lower end. A larger footprint with a drain relocation, a linear drain, and porcelain tile runs higher. Fixtures shift the total too – we work with Kohler and Moen, and we’ll price both a standard and a premium option so the difference is on paper, not in a change order. Every number we give you is upfront pricing: the number you see is the number you pay.
To make a larger bath project workable, we offer 0% financing for 18 months and $1,000 off projects over $10,000. And because this is a 20-to-35-year-old concrete-block home we’re cutting into, the work sits under our 730-Day Done Right Promise – if it’s not done right, we make it right. For waterproofing specifically, that’s two full hurricane seasons of coverage after install, which is the part most Hammocks shower quotes don’t mention.
Should You DIY It or Bring in a Crew?
No – not the slab cutting and not the waterproofing. Saw-cutting and core-drilling a structural concrete slab, then forming a recessed pan and bonding a waterproofing membrane to inspection standards, is work where a small error shows up months later inside your floor. A real expert will tell you plainly: this is the one bathroom task where saving money up front usually costs more down the road. What you can do yourself is plan the layout and pick the finishes.
FAQs
Yes, if the slab can be worked and the waterproofing is done correctly – a curbless shower is the best aging-in-place upgrade for a CBS home in The Hammocks and it holds value in a resale market dominated by tract-era bathrooms. The value depends on getting the retrofit right, since a failed pan is expensive to undo. We’ll tell you up front whether your specific slab supports it.
Sometimes, but usually only at the cost of raising the surrounding bathroom floor instead, or going with a very low curb and a linear drain. In a true slab-on-grade Hammocks home with no subfloor cavity to work with, a genuinely flush curbless floor means creating a recess. We compare both options on-site and price them side by side.
Most take one to two weeks once work starts – the slab cut and re-form run first, the membrane has to cure and pass inspection, then tile and glass. That timeline assumes the inspection is scheduled without delay, which is why we handle the paperwork. You’ll get a realistic schedule before we start, not after.
With us, it’s covered under the 730-Day Done Right Promise – if it’s not done right, we make it right, including moisture failures, for two full hurricane seasons after the shower is finished. That written guarantee is the reason we keep the membrane work with our own technicians instead of subbing it out.
Getting an Answer for Your Specific Bathroom
Every curbless shower in The Hammocks comes down to the same question: what’s under the floor in your home, and can it take a recess. If you’d rather have it looked at than researched further, Groundwork Construction Co. of The Hammocks offers a no-pressure assessment in The Hammocks – call (844) 761-9356. Calls are answered by a live person, 24/7, so you won’t hit a voicemail box. From foundation to finish line, one crew owns the work.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks, FL.