Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Richmond West, FL: What the Job Actually Involves
A sliding or patio door replacement in Richmond West typically runs $2,400 to $7,800 installed, and most jobs are finished in one to two days once the door is on site. The work means pulling the old unit, checking the opening for rot and square, prepping the sill and track, and setting a wind-rated door that satisfies Miami-Dade’s High Velocity Hurricane Zone rules. Call (844) 761-9356 and we’ll walk you through your options, including impact-rated glass and what your HOA will want to see before you even file a permit.
This isn’t the same conversation as a full window package. A patio door is the biggest moving part in the envelope, and in a storm it’s usually the first thing to fail. Glass, frame, track, and rollers all take the load together.
How We Replace Sliding & Patio Doors, Start to Finish
Every job follows the same basic sequence. The length of each stage depends on the size of the opening and what we find once the old door comes out.
Stage 1: Measure and confirm the opening (day 1, about 90 minutes)
We take rough and finish dimensions, check the header, and sight the track for level. Old doors in these 1990s and 2000s homes often sit out of square by a quarter inch or more. That single measurement decides whether we order a standard size or a custom build, and it’s the biggest reason a quote can move after the first visit. You’ll approve the panel configuration and glass package at this point.
Stage 2: Order and permit (days 1 to 14, depending on product)
Stock impact doors from Therma-Tru or Mr-Glass often land in 7 to 10 days. Custom sizes, unusual finishes, or multi-panel sliders can stretch to 4 to 6 weeks. We file the permit with Miami-Dade County while the door is in production so the two timelines overlap. You’ll need to confirm your HOA’s architectural review paperwork if you’re in one of the gated subdivisions off SW 152nd or SW 168th before we submit.
Stage 3: Demo and prep (day of install, 2 to 4 hours)
We pull the old panels and frame, cut back any rotted sill plate, and inspect the rough opening for water damage. Stucco edges get trimmed clean. This is where we sometimes find soft framing from years of a leaking track, and it’s the one thing that can add a day to the schedule. You’ll see photos of anything we find before we move forward.
Stage 4: Set, shim, and seal (same day, 3 to 5 hours)
The new door gets set plumb and level, shimmed at the hinges or rollers, and anchored with the fasteners the product approval calls for. We foam the perimeter, then flash and seal the exterior with a proper sill pan. Leaving out the sill pan is the single most common shortcut on these jobs, and it’s what causes the track failures we get called back to fix.
Stage 5: Test, adjust, and inspection (same day plus one follow-up)
We run the panels through their full travel, adjust rollers, and check the lock and handle alignment. The county inspector signs off on the wind rating and installation. You’ll get a walkthrough, a care sheet, and the 730-Day Done Right Promise in writing. If a roller or seal fails inside that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Richmond West Patio Door
Most of the decision comes down to glass, frame material, and configuration. Here’s how each one trades off.
- Impact-rated laminated glass: the default in Richmond West because the county requires it on most permitted work. It costs 20 to 35% more than standard glass but it’s what keeps the opening from becoming a hole in the envelope during a storm. Non-impact glass won’t pass inspection in the HVHZ on a new install.
- Vinyl frame: the most common choice for a slider. Insulates well, resists the salt humid air, and keeps the price down. The trade-off is that very large panels can flex, so it suits standard sizes better than a 12-foot opening.
- Aluminum frame: stronger and thinner, which means more glass area for the same opening. It’s the right call on oversized sliders and multi-panel systems where you want a wide view. It conducts heat more than vinyl, so the finish and thermal break matter here.
- Fiberglass and clad frame: Therma-Tru fiberglass units hold up well against sun and salt, with a painted or wood-look finish. Expect to pay more, but it lasts in this climate.
- 2-panel vs 3-panel slider: a 2-panel is the standard and the cheapest. A 3-panel or a corner system opens up more usable light and floor space, and costs more per square foot.
- French and hinged patio doors: swings outward on a hinge rather than sliding. Looks better on a Mediterranean elevation and seals tighter, but it needs clearance on the swing side and won’t suit every lanai layout.
What Sliding & Patio Doors Cost in Richmond West, FL
Plan on $2,400 to $7,800 for the full job, installed, with impact glass and permit. Low-end jobs are a standard 6-foot 2-panel vinyl slider replacing an existing one of the same size. High-end jobs are a 12-foot multi-panel system or a custom fiberglass French door with a wide view and a new sill pan.
The variables that move the number:
- Opening size: a standard 6-foot opening is cheapest. Every foot beyond that adds material and weight.
- Condition of the opening: rot, cracked stucco, or a sill that’s been leaking for years adds labor and framing repair.
- Glass and frame grade: impact vs non-impact, vinyl vs aluminum vs fiberglass, all shift the number.
- Permit scope: a straight like-for-like swap is a simpler permit than a widened opening or a structural change.
- HOA review: some gated communities require architectural approval before the permit is filed, which adds a step and a couple of weeks to the schedule.
A written estimate from us lists the door model, glass rating, frame material, permit fee, and labor line by line. What it won’t cover is rot repair or framing discovered during demo. We quote that in writing the moment we find it, so you’re not looking at a surprise number at the end. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond West Homes Specifically Do to This Job
Richmond West was built out mostly in the 1990s and 2000s, so almost every sliding and patio door we replace here is on a home that’s 20 to 30 years old. That matters. The original doors in these Mediterranean-style CBS homes were installed before impact glass was standard, and their tracks have taken a lot of sun, salt humid air, and heavy summer storms. We regularly see the same failure pattern in these subdivisions: a track that won’t drain, then a sill that softens, then the frame starts to pull away from the stucco. By the time a door feels “sticky,” there’s often rot underneath.
Because Richmond West sits in Miami-Dade’s High Velocity Hurricane Zone, every permitted door replacement has to use a product with county approval and match the wind-load rating for the opening. That’s not optional, and a non-compliant door won’t pass the inspection. Many of the gated communities off SW 152nd and SW 168th, and the homes along US-1, also require architectural review before the permit is filed. We handle the paperwork side as part of the job. Storm season is the real deadline here. A properly rated patio door keeps the envelope intact and stops wind-driven rain from getting into walls, so we schedule replacements ahead of summer when homeowners call, and handle post-storm track and panel damage on the back end. Homeowners often pair this with Fence Repair in Richmond West after the same storm. If the wider scope of windows and doors is on your list, this is part of a full Windows & Doors in Richmond West project, and you can see all of our Windows & Doors work.
Serving Richmond West, FL – Our Local Coverage Area
We serve Richmond West and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Richmond West
Installs usually run a single day, with the door typically ordered 7 to 10 days out for stock sizes and up to 6 weeks for custom. The permit and inspection add a week or two on the front and back ends. Call (844) 761-9356 with your opening size and we’ll give you a realistic date range, not a guess.
Yes. In Miami-Dade’s HVHZ, a door replacement that touches the envelope needs a permit and an inspection, and the door has to carry county product approval at the required wind rating. A like-for-like swap is a straightforward permit. A widened or structural opening is a bigger one. We pull the permit and handle the inspection as part of the job.
In most cases, yes. If the new door matches the existing opening, we set it into the same frame line with no structural change. Widening the opening means a header change and a bigger permit. We measure and confirm which one you’re looking at before you commit to anything.
Most jobs land between $2,400 and $7,800 installed, including impact glass and permit. A standard 2-panel vinyl slider sits at the low end; a multi-panel or custom frame sits at the high end. Call (844) 761-9356 for an exact quote. Estimates are free.
Every job is covered by our 730-Day Done Right Promise. That covers our workmanship on the install, the seal, and the track. If it’s not done right, we come back and make it right. The door itself also carries the manufacturer’s warranty, and we hand you the paperwork on the walkthrough.
Get a Free Estimate on Sliding & Patio Doors in Richmond West
We serve homeowners across Richmond West and the surrounding southwest Miami-Dade area, with sliders, French doors, and multi-panel systems built for this climate and this county’s wind rules. Call (844) 761-9356 and a live person will answer, day or night, to schedule a free on-site estimate. We’ll measure the opening, show you the product options, and put the price in writing. If you’re reworking the yard at the same time, we also handle Paver Driveways in Richmond West.
Written by the team at Groundwork Construction Co.