Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Three Lakes, FL: What It Takes and What It Costs
Metal roofing in Three Lakes, FL typically runs $15,000 – $40,000 installed, and a standard single-family home takes 5 to 10 working days from tear-off to final inspection. The job means stripping the original barrel tile, replacing or sistering the deck where it’s soft, then installing a standing-seam or metal panel system engineered to Miami-Dade’s High-Velocity Hurricane Zone standards, which apply to every re-roof in this ZIP 33186 community. Call (844) 761-9356 for a free on-site estimate and a written, line-item quote.
How a Metal Roof Goes On in Three Lakes, Start to Finish
Here’s the sequence we follow, and roughly what it costs you in time at each stage.
Day 1: Tear-off and deck inspection
The old tile comes off first, and that’s when we find out what we’re really dealing with. On a 1980s or 1990s Three Lakes home, the underlayment and decking underneath original barrel tile have usually been baking since the Reagan administration. We probe the deck, and any soft or delaminated plywood gets replaced before anything new goes down. Expect one to three days here, depending on square footage and how much decking needs swapping.
Days 2 – 3: Deck repair and underlayment
This is where the wind rating actually lives. Miami-Dade’s product-approval rules require the underlayment and fasteners to be rated for the High-Velocity Hurricane Zone, so we install a high-temp synthetic underlayment and re-nail or re-secure the deck to current code before the panels ever arrive. You’ll decide here whether to add a peel-and-stick secondary water barrier, which we usually recommend on the low-slope transitions over a lanai.
Days 3 – 6: Panel installation
Panels go down in a set pattern from the eave up, with concealed fasteners on a standing-seam system or exposed fasteners on an exposed-fastener panel. This is the stage where you choose the panel profile and color, so decide that before day 3, not after the first panel is cut. Most homes here are done with the field install in three to four days.
Days 6 – 8: Flashing, valleys, and penetrations
Every valley, chimney, and vent boot gets flashed and sealed to HVHZ detail. These are the spots that fail first in a storm, so we spend real time here. You’ll get photos of the completed flashing before the roof is closed out.
Days 8 – 10: Inspection and cleanup
Miami-Dade County inspection happens once the work is complete. We pull the permit, coordinate the inspector, and don’t consider the job done until it passes. Magnets run over the yard twice for stray fasteners and old tile shards.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
The material decision drives both the price and how the roof performs in a South Florida storm. Here’s the honest trade-off on each.
- Standing-seam aluminum: No exposed fasteners, so no leak points at the screw heads, and it holds up well against the salt-laden air that comes with western Kendall. It’s the premium end of the range and usually the best long-term pick for a home you’ll keep.
- Standing-seam steel: Comparable performance at a slightly lower cost than aluminum, though it needs a quality finish to resist corrosion in this climate. A strong middle option.
- Exposed-fastener panels: The budget end of metal roofing. Cost-effective, but the washers at each fastener are the first thing to fail, which means periodic maintenance. Suited to sheds and utility structures more than a main roof you want to forget about.
- Metal tile (stone-coated steel): Mimics the look of the barrel tile these homes were built with, which helps with HOA approval in the villa communities. It’s a higher price point than plain panels, but it keeps the Mediterranean curb appeal intact.
- Panel profile and color: Aesthetic choice, but worth deciding early. Some Three Lakes HOAs restrict colors, so check the architectural guidelines before ordering.
We work with established manufacturer systems so the wind-rating documentation and warranties hold up, and we can talk through which brand fits your budget and HOA.
What Metal Roofing Costs in Three Lakes, FL
Plan on $15,000 – $40,000 for an installed metal roof in Three Lakes. A simple single-story home with a straightforward gable roof sits near the low end; a two-story with complex valleys, a tile-look system, and multiple penetrations pushes toward the top. Here’s what moves the number:
- Roof size and pitch: Square footage is the biggest driver, and a steep or cut-up roof line adds labor hours.
- Existing deck condition: Soft or delaminated decking found at tear-off adds material and a day of labor.
- Material grade: Exposed-fastener panels versus standing-seam aluminum versus stone-coated metal tile span the whole range.
- Permit and inspection scope: A re-roof under Miami-Dade’s HVHZ regime requires rated products and a wind-mitigation retrofit, which adds permit and compliance cost compared to a simple overlay.
- Access and staging: Tight HOA lots and multi-story access slow the crew down.
Your written estimate lists tear-off, deck repair allowances, underlayment, panels, flashing, permit, and cleanup line by line. It won’t cover hidden structural rot discovered mid-job, which we price separately and show you before proceeding. Upfront pricing, no surprises. If you pair this with Roofing in Three Lakes upgrades like gutters, we’ll quote those together.
See the difference
Before
After
Before
After
Before
AfterWhat Three Lakes Homes Specifically Do to This Job
Three Lakes is a built-out 1980s – 90s pocket of western Kendall, so the metal roofing work here is almost always a re-roof on an aging Mediterranean-style concrete-block home, not new construction. That changes the job in a few concrete ways. The original barrel-tile roofs are now at end-of-life, and because Miami-Dade requires a wind-mitigation retrofit to current High-Velocity Hurricane Zone standards on every re-roof, permits and inspections define the schedule more than anything else. Neighbors on the same street frequently re-roof in clusters after a named storm, which means inspection timelines can stack up; we plan crews and permit submittals around that wave so your job doesn’t sit idle. On the tight villa and townhome lots off the main roads here, staging is a real constraint. And the stucco-clad walls and aluminum-frame single-pane windows on these homes often need attention at the same time, so homeowners frequently pair metal roofing with Impact Windows & Doors in Three Lakes for a full storm-hardening package. We cover the whole Three Lakes area and the surrounding communities.
When the scope grows past the roof itself – say you’re rethinking the whole exterior – it’s often part of a full roofing and envelope plan, and we’ll walk you through what belongs in it.
Serving Three Lakes, FL – Our Local Coverage Area
We serve Three Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Three Lakes
A typical Three Lakes home takes 5 to 10 working days from tear-off to final inspection, with the permit and HVHZ inspection adding to the tail end. Complex roofs and heavy deck repair push toward the longer side. Call (844) 761-9356 and we’ll give you a realistic date range after a site visit.
Yes. Miami-Dade County requires a permit and inspection for any re-roof, and the work must meet High-Velocity Hurricane Zone product-approval and wind-mitigation standards. We pull the permit and coordinate the inspection for you. Call (844) 761-9356 to talk through what your specific home needs.
In most cases yes – the existing roof structure and mechanical penetrations stay in place, and we flash around them rather than relocating anything. Structural changes are only needed if the deck is failing or the load rating requires reinforcement, which we flag during inspection. Call for a free assessment.
Expect $15,000 – $40,000 installed, driven by roof size, material grade (exposed-fastener versus standing-seam aluminum), deck condition, and permit scope. Call (844) 761-9356 for an exact, line-item quote – estimates are free.
The installed workmanship is backed by our 730-Day Done Right Promise, and the panel system carries its manufacturer’s wind and finish warranty. We hand you the written warranty at closeout. Call (844) 761-9356 to walk through the details.
Get Your Metal Roofing Estimate in Three Lakes
A metal roof is a 30-plus-year decision, and in Three Lakes the permit and inspection details matter as much as the panels. Call (844) 761-9356 to schedule a free on-site estimate. We’ll measure the roof, check the deck, review your HOA’s color rules, and hand you a written line-item quote with a clear timeline. Our technicians have up to 12 years of experience, and every job is backed in writing by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.