Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kitchen Design & Layout in Tamiami, FL: What It Costs and How It Works
Kitchen Design & Layout in Tamiami, FL typically runs $16,520 – $53,100 for a full design-and-build scope, and most projects take 4 to 7 weeks from first drawing to final inspection. The job is the planning layer before anything gets ordered: measuring the room, deciding where the sink, range and fridge land, choosing the cabinet run and countertop material, and mapping the electrical and plumbing changes that layout requires. Call (844) 761-9356 to book a free on-site estimate and design consult.
How the work actually unfolds, stage by stage
Nobody designs a kitchen from a catalog. The layout is settled by walking the room, checking what’s behind the walls, and matching the plan to how you cook. Here is the sequence we follow on a Tamiami kitchen design project, with what you decide at each step.
- Stage 1: Site measure and existing-condition check (day 1, about 2 hours). We measure walls, note the window and door positions, trace the existing plumbing and electrical runs, and check whether the kitchen abuts a Florida room or enclosure that was added after the original build. You confirm the appliance sizes you’re planning to keep or replace.
- Stage 2: Layout options and a written scope (days 2 – 5). You get two or three layout configurations drawn to scale: a single galley run, an L with an island, or a U-shape, depending on the room. You decide the work triangle and whether the layout moves the sink or range. This is the point where a plumbing or electrical relocation gets priced into the scope, not discovered later.
- Stage 3: Selections and permit drawings (days 6 – 14). You pick cabinet door style and finish, countertop material, backsplash tile and hardware. Simultaneously, we prepare the drawings and product approvals for the Miami-Dade permit. Cabinet orders are placed only after the layout is signed off, because a wrong cabinet size is a six-week delay.
- Stage 4: Demo, rough-in and inspection (days 15 – 25 on a typical job). Old cabinets and counters come out, any wall or plumbing change is roughed in, and the electrical and plumbing inspections happen before drywall closes up. This is the stage where a permit stops you cold if the layout wasn’t drawn to code.
- Stage 5: Install, finish and final walkthrough (days 26 – 45). Cabinets set and leveled, countertops templated and installed, backsplash and trim finished, appliances hooked up, final inspection passed, and a walkthrough with you before we call the job done. Everything is covered by our 730-Day Done Right Promise.
Every stage has a decision on your side, and we flag it in advance so nothing stalls. If you decide to fold this into a larger scope, it becomes part of Kitchen Remodeling in Tamiami and the room gets rebuilt from the studs out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The layout and material choices you’ll actually weigh
Most of the design cost and most of the regret sits in five decisions. Here is what each one really means.
- Galley, L-shape or U-shape. A galley suits a narrow Tamiami ranch kitchen and costs the least in cabinetry and counter; an L-shape opens the corner but eats more counter length; a U-shape gives the most storage but can make a small room feel tight. Pick by how many people cook at once, not by what looks good in a photo.
- Cabinet grade and finish. Stock cabinets hold the price down and arrive fast; semi-custom lets you hit an exact opening width, which matters in a block home where no two wall runs are square. Painted finishes are easier to touch up than stained, but a painted door shows chips in a busy kitchen.
- Countertop material. Quartz and quartz-based surfaces like Silestone or Caesarstone resist stains and don’t need sealing, which suits a humid subtropical climate; natural stone looks richer but needs periodic sealing. Laminate is the budget option and shows wear at the sink edge first.
- Sink and faucet. An undermount sink with a solid faucet from a brand like Kohler or Moen costs more upfront and lasts years longer than a builder-grade drop-in with a plastic sprayer. The sink choice also drives whether the countertop needs a different cutout and template.
- Lighting and outlets. Under-cabinet lighting and enough counter outlets are the cheapest comfort upgrade in any kitchen. Getting them into the layout drawing is free; adding them after the drywall is closed is not.
The cabinets, counters and tile that hang off this plan are their own trades. Homeowners often pair this with Vanities, Tile & Fixtures in Tamiami when the bathrooms are due for the same refresh, or with Small Bathroom Remodels in Tamiami when a tight hall bath sits next to the kitchen.
What Kitchen Design & Layout costs in Tamiami, FL
A full design-and-layout scope in Tamiami runs $16,520 – $53,100, and a smaller or partial layout stays closer to the low end. The number you see on our written estimate is the number you pay, and there are no change orders buried in the middle.
| Line item | Typical range in Tamiami |
|---|---|
| Design & layout plan (drawn to scale, with permit drawings) | $945 – $2,950 |
| Cabinet installation (the bulk of the layout work) | $4,720 – $15,340 |
| Countertop templating and installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
| Full design-and-build scope | $16,520 – $53,100 |
Four things push a job toward the high end: room size and cabinet run length; relocating the sink, range or electrical panel; material grade (semi-custom cabinetry and quartz versus stock and laminate); and permit scope, especially when an unpermitted enclosure has to be corrected before inspection. What’s included in the written estimate: design drawings, cabinetry and installation, countertop fabrication, backsplash, and the permit and inspection fees for the scope we’re pulling. What typically isn’t: appliances you buy separately, and structural changes that turn into a wall removal.
Want an exact figure for your room? Call (844) 761-9356. The estimate and design consult are free, and we answer live, 24/7.
See the difference
Before
After
Before
After
Before
AfterWhat Tamiami homes do to a kitchen design
Tamiami is a low-rise, largely Cuban-American pocket of unincorporated Miami-Dade near the Everglades edge, and almost all the work here is on existing homes in ZIP 33184 – not new builds. That changes the design job. Most of the stock is 1970s – 1990s concrete-block ranch homes with barrel-tile or shingle roofs, and a good share of the homes off SW 8th Street picked up unpermitted Florida rooms and patio enclosures from prior owners. If a wall we want to open sits against one of those enclosures, the design has to account for legitimizing or removing that past work before a Miami-Dade inspection will pass the new scope.
There’s also the hurricane code. Every opening, and every product tied to the exterior envelope, has to meet Miami-Dade product approval and post-Andrew wind-load rules, and 40-year recertification applies to older buildings. Kitchens themselves aren’t wind-rated, but a design that moves a window or a slider drags the whole envelope into the permit. The near-daily summer thunderstorms and salt-heavy humid air also mean sink cabinet bases and toe kicks rot faster here than upstate, so we spec moisture-resistant cabinet boxes and sealed edges as a default. We cover this across Tamiami and the surrounding city pages – see Tamiami for the wider service area.
Serving Tamiami, FL – Our Local Coverage Area
We serve Tamiami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Kitchen Design & Layout in Tamiami
Plan on 4 to 7 weeks from signed layout to final inspection, with the design phase itself taking about 2 weeks. The permit and inspection schedule is the biggest swing factor on a Tamiami job, because Miami-Dade review doesn’t move faster for anyone. Call (844) 761-9356 and we’ll give you a realistic calendar for your room.
Yes, if the layout moves plumbing, electrical or any wall. A cosmetic swap of cabinets and counters in the same footprint sometimes doesn’t require one, but the moment you relocate a sink or add circuits, Miami-Dade expects a permit and inspection. We pull the permits and handle the inspection sequence for you.
Often, yes. Swapping the fridge and range walls, adding an island, or rethinking cabinet runs can happen without opening a wall or moving a drain, which keeps the price at the low end of the range. Relocating the sink or removing a wall is where the cost climbs, and we’ll show you both versions in the drawing before you commit.
Most Tamiami design-and-build jobs land between $16,520 and $53,100, with a dedicated design plan at the low end and a full cabinet, counter and island scope at the high end. Call (844) 761-9356 – the on-site estimate and design consult are free, and we give you the line-item breakdown in writing.
Every kitchen design project is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right, and the guarantee runs far longer than the industry norm. Our technicians have up to 12 years of experience, and every one is background-checked and arrives in uniform.
Ready to plan your Tamiami kitchen?
Call (844) 761-9356 for a free on-site estimate and design consult on Kitchen Design & Layout in Tamiami. We’ll measure the room, walk you through two or three layout options, and hand you a written line-item estimate with upfront pricing and no surprises. If you’re weighing the whole room versus a layout-only scope, our kitchen remodeling service covers the full build. Live person answers, 24/7 – no voicemail.
Written by the team at Groundwork Construction Co..