Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterImpact French Doors Cost in The Hammocks, FL: What You’ll Actually Pay
Impact French door installation in The Hammocks runs about $4,000-$9,000 per opening, and hardware, flashing, and permit add another $900-$2,200 on top. The number homeowners rarely see on a quote is the structural header: $1,500-$3,000 to reinforce or rebuild the block lintel above a wide opening. Call (844) 761-9356 for a free estimate and we’ll walk your existing rough opening before you sign anything.
Here’s why that matters in this neighborhood specifically. The Hammocks is a Kendall-area subdivision built almost entirely during the 1980s-2000s tract boom, so nearly every single-family home here is CBS (concrete block and stucco) over a tile roof. These are now 20-35 year-old houses hitting their second-generation renovation cycle: impact-window retrofit, accordion shutter replacement, lanai rebuilds, and interior reconfiguration. Whole blocks age on the same schedule, which is why one neighbor’s door permit tends to set off a run of copycat jobs down the street. When your street decides it’s time, the structural question is the one that separates a solid quote from a cheap one.
What a Real Impact French Door Quote Breaks Down Into in Miami-Dade
The unit itself is only part of the story. Here’s the line-item range we see on installed projects in The Hammocks:
| Line Item | Typical Range |
|---|---|
| Impact French door unit (standard pair, PVC or aluminum-clad) | $2,200-$5,200 |
| Multi-panel or large opening (3-4 panel, up to 12 ft) | $4,800-$8,500 |
| Hardware (handles, multipoint locks, hinges) | $250-$700 |
| Installation labor | $900-$2,000 |
| Flashing, pans, sealants, stucco repair | $400-$1,100 |
| Miami-Dade permit and inspection fees | $300-$650 |
| Structural header reinforcement (when required) | $1,500-$3,000 |
That header line is the one to look for. A standard entry door needs a rough opening roughly 3 ft wide. A French door pair needs 6 to 8 ft of uninterrupted wall, and a four-panel slider needs even more. In a CBS wall, that span has to be carried by a masonry lintel or a steel beam. In The Hammocks’ tract houses, those lintels were sized for the builder’s original plan, and once you cut wider you’re talking about a load-path question, not a trim question.
On this page, we’re talking about how to read a quote. If you want the full scope of what we install, see our Windows & Doors page.
Why the Header Above Your Opening Is the Most Expensive Variable
Load-path analysis before demo isn’t optional under Miami-Dade code, and it’s the single most common failure point on a French door retrofit in a 1980s-2000s Hammocks home. Here’s what we look for during the pre-demo assessment:
- Undersized lintels. Tract builders often used the minimum block lintel that passed for the original opening. Widen the rough opening and the load no longer has a proper path to the foundation.
- Hairline cracks in the block above the jamb. In this subtropical climate, summer-after-summer heat cycling and hurricane-season wind-driven rain work on stucco and mortar joints. A cracked lintel carrying a wider load is a real risk, not cosmetic.
- Anchor pattern conflicts. The wider the opening, the more anchor points the wind-load calc will demand. If the existing jamb block can’t accept that spacing, the header has to be rebuilt to spec.
- Stucco tie-in. Once the header is opened, the stucco on both faces has to be cut back and properly re-keyed, otherwise you get moisture intrusion at the reveal within one wet season.
That last point is where cheap quotes get expensive. A contractor who never opened the wall can’t see the header condition until demo day, and that’s exactly when the $1,500-$3,000 “surprise” shows up as a change order. Our answer is to include a pre-demo structural assessment in every quote, so the header condition is priced in before the contract is signed, not discovered after the truck pulls up.
The Miami-Dade NOA Question: Why Anchor Spacing Decides Wind Performance
Every impact French door installed in Miami-Dade has to be covered by a current Notice of Acceptance (NOA) from the county’s product control office. That NOA specifies the exact anchor spacing, embedment, and edge distance the unit needs to meet its rated design pressure, and French doors are held to a stricter standard than a single door because of the hinge and latch stiles.
Here’s the practical consequence. A standard single door anchors along two short jambs. A French door pair anchors along two jambs and through the center meeting stile, and the pressure path at the latch stile is where failures happen under a design wind event. More anchor points, tighter spacing, and a specific masonry fastener pattern that has to hit the block webs, not the hollow cores. If the existing jamb block is too narrow, or the header isn’t square, the anchor pattern can’t be achieved without re-work.
We install Andersen and Marvin French door lines with current Miami-Dade NOA approvals, and every quote names the specific NOA the unit will be installed under. That’s a documentation question, not a marketing one, and you should ask any contractor to show it to you in writing.
Decorative Upgrades: What You’re Actually Buying
Simulated divided lites (the decorative muntin grid that gives a French door its traditional look) add $800-$2,000 to unit cost. They do not add a single pound of wind-load performance. They also don’t change the anchor pattern, the header sizing, or the NOA.
Go ahead and buy them if you love the look; they’re a legitimate upgrade for a house on a uniform tract where every door on the block looks the same. But if you’re being sold “premium grille package” as a structural improvement, that’s a misunderstanding at best. The structural money is in the header and the anchor pattern. The decorative money is in the grille and the finish. Keeping those two lines separate in your own head is how you know you’re being quoted fairly.
If your project also touches a patio or drive approach, we install Cambridge and Techo-Bloc hardscape lines, and those conversations often bundle cleanly with a door replacement when the opening runs out to a lanai.
How We Handle the Job, From Quote to Final Walkthrough
Groundwork Construction Co. of The Hammocks answers the phone with a live person, 24/7, which matters more than it sounds when a wind-driven rain event is threatening the wall of an open opening. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every project is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right; that’s the whole point of a two-year workmanship guarantee.
Upfront pricing means the number you see is the number you pay, and our standing offers help with affordability: $1,000 off projects over $10,000, a free project estimate and design consult, and 0% financing for 18 months. Most jobs are completed in a single visit once materials and permits are set, though a full header rebuild will run a second day. You can review our The Hammocks service area page to see how we schedule across the neighborhood.
FAQs
Most installed impact French door projects in The Hammocks land between $4,000 and $9,000 per opening, and a wide multi-panel opening or a structural header rebuild can push that to $11,500-$12,000. Call (844) 761-9356 for an exact quote; estimates are free.
Yes. Any impact door replacement in Miami-Dade requires a permit and a final inspection, and the permit fees typically run $300-$650 for a French door installation. The permit also verifies that your specific door is installed per its Notice of Acceptance, which is why leaving it out of the quote is a red flag. Call us and we’ll walk you through the timeline.
Usually yes. A pre-demo structural assessment that opens inspection access above the jamb will show lintel size, block condition, and any hairline cracking before demolition starts. We include that assessment in every quote so the header cost is on paper up front. If the assessment turns up a rebuild, we price it in writing before a contract is signed. Call (844) 761-9356 to schedule.
No, decorative simulated divided lites don’t affect the wind rating, but they don’t improve it either. They add $800-$2,000 to the unit cost for aesthetics only. The performance comes from the door’s NOA-approved anchor pattern and the header condition. If you’re paying for a grille package, know what you’re buying. Call us for a straight read on both lines.
Get a Straight Number Before You Sign
French doors are a real financial decision on a Hammocks home, and the header is where quotes get fuzzy. We’ll bring the structural assessment, the NOA, and the full line-item breakdown to your estimate, in writing, at no charge. Call (844) 761-9356 today; a live person answers 24/7.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks, FL.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong