Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Tamiami, FL: What It Takes and What It Costs
Door installation in Tamiami typically runs $400 to $1,800 per door for standard pre-hung exterior and interior units, with impact-rated entry systems climbing to $2,500 or more once the job has to meet Miami-Dade wind-borne debris standards. Most single-door jobs finish in one day from demo to weather-sealing; a full front-entry replacement with new framing, threshold, and trim is a two-day job. Call (844) 761-9356 and we’ll walk your exact door use over the phone before anyone sets foot on the property.
Doors in this pocket of southwest Miami-Dade fail for the same handful of reasons every time: sun, salt air, and the fact that the original aluminum and wood units on a 1970s or 1980s block home have simply outlived their seals. We work on plenty of properties off SW 8th Street where a front door that looks solid is really a frame that’s been quietly wicking water into the block for a decade. Pulling it is the only honest way to know. That’s the first thing we check on a Tamiami walkthrough.
Key takeaways
- Standard door installation in Tamiami: $400 – $1,800 per door. Impact-rated entry systems: $2,500 – $5,500 installed.
- A single door is a one-day job; a full entry with reframing is two.
- Every exterior door on a home in the 33184 ZIP that’s under Miami-Dade inspection scope needs product approval (NOA) before it passes.
- We do the demo, the shimming, the flashing, and the trim in one visit so you’re not living with a taped-off opening for a week.
How a door installation actually runs, stage by stage
We don’t stage door work over a week because a door doesn’t need a week. Here’s the real sequence.
Stage 1: Measure and pre-check (day of estimate). The rough opening gets measured at three points (top, middle, bottom) because a 1970s concrete-block wall is almost never square. We check for existing termite damage around the sill and note whether the current frame is set into the block or onto a wood buck. This is where we find out if the door is a direct swap or a reframe.
Stage 2: Product order and permit pull (3 – 10 days depending on product). Stock interior doors ship fast; a custom entry or impact unit from a brand like Therma-Tru has a lead time. If the door is exterior and the scope triggers a permit, we submit the drawings with the product’s NOA attached. The homeowner decides the swing direction, the finish, and the hardware here, and that’s the last easy chance to change the spec without a re-order.
Stage 3: Demo and opening prep (first half of install day). The old door and frame come out. The rough opening gets squared and cleaned, any rotted buck is cut back and re-framed, and the sill pan goes down. On block homes in Tamiami, this is where we find the surprises – old aluminum frames set in mortar, or a Florida-room enclosure where the original owner’s work isn’t to code.
Stage 4: Setting and weather-sealing (second half of install day). The new unit is set, shimmed, and plumbed. We flash the head and jambs, seal the threshold, and shoot the perimeter. On any exterior opening in this market the flashing detail is what keeps water out for the next twenty years – it’s the step we spend the most time on and the one that gets skipped the most by the last guy.
Stage 5: Trim, hardware, and inspection (final half-day). Casing and trim go on, the lockset and deadbolt align, the door swings clean with no rubbing. If the job is permitted, the inspector signs off. The homeowner walks the threshold, checks the swing and latch, and gets the job closed out. Our technicians have up to 12 years of experience and every door install is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll actually choose between
Most Tamiami homeowners end up picking between four product categories. The honest trade-offs:
- Fiberglass entry doors (Therma-Tru and similar). The best balance for this climate. They won’t swell, warp, or rot the way wood does in salt-laden humid air, and they take a stain or paint finish. Cost sits in the middle of the range. If you want the look of wood with the durability of a composite, this is the pick.
- Steel doors. The cheapest exterior option and a strong security choice, but on a south-facing wall in subtropical sun they get hot to the touch and can dent. Fine for a side or service door, less ideal for a front entry with real curb appeal.
- Solid-wood doors. Beautiful, but in this market they want annual maintenance and they will move with humidity swings. If it’s an interior door (bedroom, office, closet) you get the look without the weather exposure.
- Impact-rated entry systems (Mr-Glass, ViewLux, Barrette all make units we install). The full-compliance choice for any exterior opening that has to meet High Velocity Hurricane Zone standards. Pricier upfront, but they meet the wind-borne-debris requirement and often qualify for insurance premium discounts – worth pricing against your current policy.
On the interior side, the choices are simpler: hollow-core for closets and rentals, solid-core for bedrooms and bathrooms, and pre-hung vs. slab. Pre-hung units are the practical answer for a block home because the existing jambs are usually shot anyway.
What Door Installation costs in Tamiami, FL
Here’s the working range we quote for door installation in Tamiami, line by line:
| Job | Typical installed range |
|---|---|
| Interior door (hollow-core, pre-hung) | $400 – $750 per door |
| Interior door (solid-core, pre-hung) | $550 – $950 per door |
| Exterior fiberglass entry (standard) | $900 – $1,800 per door |
| Exterior steel entry | $700 – $1,400 per door |
| Solid-wood entry | $1,200 – $2,500 per door |
| Impact-rated entry system (supply + install) | $2,500 – $5,500 per door |
| Reframe / opening rebuild add-on | $350 – $1,200 |
What pushes a job to the high end: a rough opening that’s out of square and needs re-framing (adds a half day), a rotted buck or termite-damaged sill that has to be cut back and replaced, a custom-size unit, impact-rated product with NOA paperwork, and existing unpermitted framing that has to be corrected before the new door can pass. On the low end you’ve got a stock-size interior swap into a sound jamb with no surprises behind the trim.
A written estimate from us is line-itemed: the door, the hardware, the flashing and sealants, the permit (if required), the trim, and the labor. The number you see is the number you pay – no change orders unless you change the scope. What’s not included unless we call it out: a new threshold if the old one is reusable, painting or staining after install (we hand off a clean, primer-ready surface), and any structural correction to the wall that isn’t visible at the estimate walkthrough.
See the difference
Before
After
Before
After
Before
AfterWhat Tamiami homes specifically do to this job
The housing stock here does most of the storytelling. Tamiami is a low-rise suburban pocket of unincorporated Miami-Dade, almost entirely 1970s-to-1990s concrete-block ranch homes with barrel-tile or shingle roofs, plus the Mediterranean-style townhome clusters along the SW 8th Street corridor. Every exterior door on those homes sits inside Miami-Dade’s High Velocity Hurricane Zone, which means the product itself needs a NOA approval and the install has to hold up to post-Andrew wind-load and wind-borne-debris standards. That’s not a style preference; it’s a permitting reality, and it changes the door you buy and how it gets anchored.
The other thing we run into constantly is prior work. A lot of these 1970s and 1980s block homes off SW 8th Street carry unpermitted Florida rooms and patio enclosures installed by previous owners, and when we pull a door permit we sometimes have to help legitimize or demolish that past work before the new scope will pass inspection. Budget for that possibility on an older Tamiami block home and you won’t be surprised.
Beyond the code, the climate is the boss. Salt-laden humid air and near-daily summer thunderstorms wreck door seals and flashings faster here than almost anywhere. We schedule exterior install mornings during hurricane season to stay ahead of the afternoon rain, and we detail the head flashing like it’s the last thing we’ll do before the customer walks it. Because in this market, it’s the detail that decides whether that door is still swinging clean in 2036. If the wider project also touches glazing or trim, that’s part of a full Windows & Doors in Tamiami scope we can quote together – and homeowners often pair this with a new Vinyl Fence in Tamiami or a Chain Link Fence in Tamiami while the crew is already out.
Serving Tamiami, FL – Our Local Coverage Area
We serve Tamiami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Tamiami
A single interior or exterior door is a one-day job. A full entry replacement with re-framing runs two days. Custom or impact-rated units add 3 – 10 days of lead time before install day because the product has to ship. Call (844) 761-9356 and we’ll give you a realistic window based on the door you’re picking.
For an exterior door replacement, almost always yes – the county wants the product’s NOA approval attached before it will pass inspection. Interior door swaps typically don’t trigger a permit. We pull the permit and sit for the inspection as part of the quote, so you’re not chasing paperwork. Call (844) 761-9356 for a free estimate that spells out the permit scope.
Usually yes – if the existing rough opening is sound and square, we can set a pre-hung unit into it without touching the wall. On a 1970s block home the frame is often the problem, though, and a reframe adds $350 – $1,200. We’ll tell you which one you’re facing at the estimate, not after the door’s off. Call (844) 761-9356.
Standard interior doors run $400 – $950 per door; exterior entries run $700 – $2,500 depending on material; impact-rated systems run $2,500 – $5,500 installed. The variables that move the number are door size, frame condition, material grade, and whether the permit scope triggers a reframe. Call (844) 761-9356 for an exact quote – estimates are free.
Every door installation we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (844) 761-9356 to talk through the details.
Get a free door installation estimate in Tamiami
Call (844) 761-9356 for a free on-site estimate for Door Installation in Tamiami. A live person answers 24/7, we walk your doors, measure the openings, price the product and the permit scope on the spot, and hand you a line-itemed quote. No pressure, no vague number, no surprise change orders. If you’re covering the whole exterior, our Windows & Doors service team handles the rest of the openings in the same visit, and we cover the broader Tamiami area with scheduled estimates throughout the week.
Written by the team at Groundwork Construction Co.