Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The The Hammocks Owner’s Guide
We install and repair Therma-Tru windows and doors for The Hammocks homeowners, and most jobs run $4,500 – $15,000 installed for window replacement and $8,000 – $25,000 for impact-rated window installation when our crews do the full project. Single door slab swaps and hardware repairs cost far less, and most jobs we quote are completed in a single visit once the right part is matched to your model. When a Therma-Tru part fails in The Hammocks, it almost always shows up one of three ways: a door that won’t latch shut without a shove, a window that leaks a thin line of water during a summer squall, or a multi-point lock that suddenly spins loose in your hand.
Which Therma-Tru Models This Applies To
Therma-Tru builds entry doors and door systems under model families like the Fiber-Classic, Smooth-Star, and Classic-Craft lines, plus multi-point locking systems that vary by year. Window and door hardware – hinges, sills, sweeps, glass units, and the lock assemblies on sidelites – is where compatibility gets messy. The single biggest gotcha we run into in The Hammocks: a fiberglass entry door from one model line uses a sill height and jamb configuration that won’t accept a sweep or sill from a different line, so a “universal” aftermarket part from a big-box shelf often won’t seat correctly and will leak within a season. Always identify your model by the label inside the door edge or jamb, not by photos.
Opening dimensions matter too. A rough opening measured to a quarter inch can send you home with a door slab that binds, or a sidelite that won’t align with the existing frame. When we quote a Therma-Tru repair or replacement in The Hammocks, we measure the rough opening, verify the model label, and confirm the hardware footprint before we order anything.
The OEM-vs-aftermarket call depends on the part. Factory Therma-Tru glass, sills, and lock sets carry the exact profile and finish your door was built around. Quality aftermarket hardware (from brands that make door and window components) can work well for sweeps and weatherstripping, and often costs less. For multi-point locks and anything structural, we recommend sticking with the factory match. As an independent service provider, we source parts from authorized distributors and are not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Windows & Doors Is Failing
Here’s what The Hammocks owners actually describe when they call us, and what’s behind it:
- The door drags on the sill or threshold. Fiberglass and wood-composite doors expand and contract with The Hammocks heat and humidity, and a sagging hinge or worn sweep lets the door ride low. Left alone, the drag wears the finish and eventually cracks the threshold.
- Water shows up inside the frame after summer storms. A failed sill seal, deteriorated weatherstripping, or a glass unit that’s lost its seal lets driven rain in. The Hammocks gets intense afternoon thunderstorms from June through September, so a marginal seal fails fast.
- Condensation fogging between the glass panes. That’s a failed insulated glass unit (IGU). The seal has broken and the unit can’t be repaired from the inside – it needs replacement.
- The lock or deadbolt feels loose or won’t catch. Worn strike plates, a misaligned multi-point assembly, or a lock body that’s shifted with the door. This is a security concern, not just an annoyance.
- Daylight visible around the closed door or window. A failing seal or shifted frame lets air and water in, and your AC bill climbs while The Hammocks humidity works its way into the wall cavity.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For The Hammocks, here’s how the numbers break down by project type. These are installed ranges for our crews, materials and labor together:
| Project | Installed Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Single door slab swap or hardware repair | Quoted per job |
The range depends on window count, size, whether it’s impact-rated, and whether the rough opening needs adjustment. Front-door replacements with sidelites and multi-point hardware fall at the higher end because the frame, glass, and lock system all need to align. What’s included in every quote: upfront pricing with the number you see being the number you pay, permits pulled and inspections passed where The Hammocks requires them, and our 730-Day Done Right Promise on the workmanship.
DIY or Call Us?
You can safely check a few things yourself: read the model label, test the lock with the door closed, wipe and inspect the sweep and weatherstripping, and look for daylight or water staining. What goes wrong with DIY is replacing glass units, re-hanging a door that’s out of square, and adjusting multi-point lock hardware – a misaligned strike or an improperly seated glass unit can leak, fail inspection, or leave your door unsecured. Window and door work in The Hammocks is also subject to local permit requirements tied to impact and wind-load standards, and getting that wrong is expensive to undo. If your door or window has shifted, fogged, or locked you out of your own entry, call us instead of wrestling with it on a Saturday.
FAQs
Expect 15 to 25 years from a well-built Therma-Tru entry door with proper maintenance, and 20 years or more from a quality window – though The Hammocks heat, humidity, and salt air shorten the tail end of those windows if seals aren’t kept in good shape. Doors near the coast tend to need hinge and sweep attention sooner than inland.
Yes, often. Sweeps, weatherstripping, strike plates, and hinge hardware are usually repairable or replaceable without a full door swap. A fogged glass unit needs replacement because the seal is inside the unit and can’t be re-sealed on site. We’ll tell you which side of that line you’re on during the estimate.
A single door slab swap or hardware repair usually runs a few hours and is often done in one visit. A full entry door system with sidelites can take most of a day, and multi-window replacements run one to two days depending on count and whether framing adjustments are needed.
We match your part to the model label inside the door edge or jamb, verify the rough-opening dimensions, and order from authorized distributors so the profile and finish are correct. That’s how we avoid the aftermarket fit problems that send The Hammocks owners back to the store twice.
Our technicians have up to 12 years of experience, and we also work with KraftMaid, Cambria, and Silestone on the interior side when a door or window project ties into a larger remodel. Call (844) 761-9356 to schedule your free estimate – a live person answers 24/7, and estimates are free.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.