A Groundwork company - serving The Hammocks, FL
T

Therma-Tru Roofing in The Hammocks, FL

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Roofing: The The Hammocks Owner’s Guide

If the roof-side components on your Therma-Tru system have failed, we install Therma-Tru-compatible roofing assemblies and flashing details here in The Hammocks, with most repair-level jobs running $400 – $1,800 and full roof replacement on the surrounding structure running $8,000 – $20,000. Timing depends on what’s actually failed. A seal or a single flashing point can close out in one visit; a roof section that’s been leaking into a deck or wall assembly needs a scoped estimate before anyone commits to a date. When we meet with you, we’ll walk the roof, identify the exact parts involved, and hand you an upfront number in writing.

Call (844) 761-9356

Owners usually find the problem the same way: a water stain spreading across a ceiling, a soft spot near a penetration, or a contractor on a kitchen or bath project pointing up at a flashing detail that’s been quietly failing for seasons. You didn’t go looking for this. The roof found you.

Key Takeaways

  • Therma-Tru roof-side parts ship to specific product families, and the label on your unit is the fastest path to the right match.
  • Installed repair work in The Hammocks typically lands between $400 and $1,800; replacement on the surrounding structure starts at $8,000 and runs to $20,000.
  • South Florida heat, wind-driven rain, and years of UV exposure are what kill these components first, not bad luck.
  • Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with Therma-Tru.

Which Therma-Tru Models This Applies To

Therma-Tru builds door and entry systems across several product families, and the roof-side and flashing components that seal them are matched to those families, not universal. The fastest way to identify what you’re working with is the identification label affixed to the door slab or the frame jamb. That label carries the model number and series, and it’s the piece of information that eliminates guesswork when a seal or flashing detail has to be sourced. If the label is gone, we measure the opening and the existing component instead.

The decision that matters for Therma-Tru specifically is OEM versus a quality aftermarket equivalent. OEM pieces guarantee a dimensional match to your exact model line, which is what you want when the part is load-bearing or integral to the weather seal. Quality aftermarket equivalents exist for many common profiles, but the fit tolerance is where owners get burned: a piece that’s close but not right lets water into places you won’t see until the drywall tells you. We source to the model, not to “close enough.”

If you’ve been building out other rooms while you sort this out, we also work with KraftMaid, Cambria, and Silestone on the interior side, so a single contractor relationship can cover the whole scope without three sets of phone calls.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Roofing Is Failing

In The Hammocks, the failure pattern is almost always the same sequence: the seal breaks down first, water gets behind the flashing, and by the time the ceiling tells you, the moisture has had a season or two to work. Here’s what to watch for.

  • Water staining on interior ceilings or walls near the door header. The seal has failed and water is tracking along the flashing behind the finish. Catching the stain early is the difference between a $400 repair and a much larger scope.
  • Visible gaps or lifted edges at the flashing detail. Adhesive-backed seals lift in The Hammocks heat, and once the edge lifts, wind-driven rain has an opening. This is the most common thing we find on roofs in this climate.
  • Soft spots or spongy sheathing around the door penetration. Moisture has moved past the surface into the deck. If you can press and feel give, the repair scope has grown past the part itself.
  • Rust or corrosion on metal components. Salt air in the region accelerates corrosion on fasteners and flashing, shortening the real-world lifespan below what the spec sheet promises.
  • Daylight visible from inside around the door perimeter. That’s the seal and flashing failing together, and it’s a water intrusion problem even before you see a stain.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roof repair in The Hammocks runs $400 – $1,800 installed. Full roof replacement runs $8,000 – $20,000. Tile roof repair, if your home is on tile, runs $600 – $2,500. The range is driven by how far the moisture has spread, whether the sheathing needs replacement, and how accessible the penetration is from the roof surface.

Our quotes are line-item: part, labor, any sheathing or seal replacement, all transparent before we start. Upfront pricing, no surprises, is how we work; the number you see on the estimate is the number you pay. We source the part to your model number, we pull permits where the scope requires it, and the work is covered under the 730-Day Done Right Promise, which means if it’s not done right, we make it right.

DIY or Call Us?

Roof work at height is genuinely dangerous, and this page won’t pretend otherwise. Florida sun, heat, and two-story drops are a combination that sends people to the ER every year. A homeowner can safely do a few things from the ground or from an interior vantage point: document the stain with photos, confirm the model label is legible, and check for the lifted edge at the flashings you can see without getting on the roof. That’s the checklist.

Where it goes wrong is on the roof itself: improper flashing reinstallation that looks fine from a ladder and fails under the first real rain, sealant applied over the wrong surface, and fastener placement that voids the next round of coverage. We’d rather you spend the call than the recovery time. One phone call to (844) 761-9356 and we’ll assess what’s actually failed and quote it honestly, no pressure and no charge for the estimate.

FAQs

How long should Therma-Tru roofing components last in The Hammocks?

Ten to fifteen years is the realistic window for many of these components in South Florida, shorter than the national lifespan because UV exposure and salt air break down seals and metal fittings faster here. Florida sun, heat, and wind-driven rain are the operational reality, and the parts age to that reality, not to a spec sheet written for a milder climate. Call (844) 761-9356 for a free estimate if yours are past that point.

Can the failed part be repaired instead of replaced?

Often yes. A failed seal or a single flashing detail is a repair, not a replacement, and the $400 – $1,800 range covers most of those jobs. Whether repair is the right call depends on the condition of the sheathing and the surrounding roof. Call (844) 761-9356 for an exact quote; estimates are free and we’ll tell you honestly which option fits.

How long does the swap take?

Most repair-level swaps close out in a single visit; full replacement or a scope that involves sheathing and deck repair runs longer and gets scheduled with a firm timeline upfront. Most jobs are completed in a single visit when the scope allows, and our technicians have up to 12 years of experience matching part to model correctly the first time. Call (844) 761-9356 to schedule.

How do you source the part?

We match to your model number from the identification label and source OEM or a verified quality equivalent, whichever the application calls for. We don’t guess at fit and we don’t claim to carry parts on a truck; parts are ordered to your specific unit. Call (844) 761-9356 for a free project estimate and design consult.

If you’re in The Hammocks and the roof has started talking, call (844) 761-9356. We answer with a live person 24/7, we’ll quote the work upfront, and we’ll stand behind it in writing for 730 days. Your estimate is free, and the $1,000 off projects over $10,000 plus 0% financing for 18 months are available if the scope grows past a simple repair. From foundation to finish line, we’re the contractor that handles it.

Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch