Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Kitchen Remodeling: The The Hammocks Owner’s Guide
Silestone kitchen remodeling in The Hammocks runs $14,000 to $45,000 installed, and most projects start within a few weeks of an approved design. When your Silestone quartz countertop chips, stains, or separates at a seam, the part that failed is the surface itself or the substrate under it, and the fix depends on the slab series and edge profile you already own. We match the correct replacement material, cut it to your existing cabinets, and install it to spec. If you’re standing in your kitchen right now with a fresh crack across the peninsula or a dull stain that won’t lift from the surface, you already know why you’re here.
Which Silestone Models This Applies To
Silestone is engineered quartz, not natural stone, so it’s identified by series and color name rather than a model number stamped on the underside. Pull the original fabrication paperwork or check the back edge of the counter for a fabricator’s label; that label usually names the colorway, slab thickness, and edge profile. Most Silestone installed in South Florida homes is 2 cm or 3 cm thick, and that thickness determines whether a replacement piece bonds cleanly to your existing edge.
The compatibility gotcha: Silestone colors are discontinued and reformulated on a rolling basis, so a 2015 “Lyra” is not guaranteed to match a 2024 “Lyra.” Slab dye lots shift subtly, and quartz patterns are directional. On a backsplash run or an island top, that mismatch shows under Florida’s bright afternoon light. Where an exact color match isn’t available, we source a quality equivalent from Cambria, or we re-clad the full run so the surface reads as one continuous piece.
OEM versus aftermarket here means the difference between certified Silestone fabrication and a generic quartz that wears differently. We work with vetted stone fabricators who handle Silestone and comparable premium brands, so you get proper material, not a color that photographs well and fades in two summers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Kitchen Remodeling Is Failing
- A chip along the edge or sink cutout. Quartz chips at high-stress cutouts where the substrate flexed or the undermount clip pulled loose. Small chips can sometimes be filled; a chip at the rim of a sink usually means the surround needs replacement.
- A visible separation at the seam. Seams open when the cabinet run drops or the adhesive failed. In The Hammocks, that often traces to a cabinet settling on a slab foundation after heavy summer rains; the counter isn’t the real problem.
- Staining or discoloration that won’t lift. Silestone resists most stains, so a persistent ring usually points to a surface that’s been etched or scuffed by a hot pan or a harsh cleaner that wore the finish. That damage is dulled resin, not dirt.
- Thermal shock cracks radiating from the cooktop. Quartz handles heat better than many materials, but a hot pan set directly on the surface or a slow leak under the cooktop can crack it. Once a crack reaches the edge, repair rarely holds.
- A sagging or spongy section underfoot in front of the counter. The counter’s precision depends entirely on the cabinets it rests on. When the substrate sags, the top follows, and no slab replacement will stay true until the cabinets are corrected.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel (new counters + cabinets + finishes) | $14,000 – $45,000 |
| Countertop installation or replacement | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Cabinet installation (if substrate needs correction) | $4,000 – $13,000 |
What drives the range: slab length and whether the job needs one continuous run or several seamed pieces, whether the sink or cooktop cutouts are reused, and whether the cabinets under the counter are sound. We give you a written line-item quote, so the number you see is the number you pay. Every counter we set is covered by our 730-Day Done Right Promise, so if a seam or a chip needs attention later, we make it right.
DIY or Call Us?
You can safely check a few things yourself: look under the counter for a sagging or loose cabinet, photograph the fabricator’s label, and measure the run and the slab thickness. That information helps us quote accurately. Where DIY goes wrong is at the cutout and the seam. Quartz is heavy, and cutting or lifting it without proper support and tooling is how owners turn a $2,000 counter repair into a full cabinet rebuild.
There’s a real safety edge here, too. A failing undermount sink or a counter that’s separating means a heavy slab is unsupported, and it can drop. Don’t wedge it, don’t load the countertop, and don’t try to lift a full run on your own. When in doubt, leave the slab where it is and call us. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. If you want the correct part matched to your Silestone surface, call (844) 761-9356 to schedule your free estimate.
FAQs
Tenny to fifteen years is realistic for Silestone quartz in a The Hammocks kitchen, and where a surface reaches that age it’s often the substrate, not the quartz, that gives out first. The intense South Florida sun and seasonal humidity stresses the cabinets and adhesive more than the slab itself, so how the material was installed counts as much as the brand.
Sometimes, yes. A chip near an edge or a shallow scuff can often be filled and polished so it disappears. You should call us for an exact quote, though, because a crack that runs to the edge or a seam pulling apart usually means the whole piece needs replacing. Estimates are free, and the call is answered by a live person.
Most Silestone countertop replacements are completed in a single visit once the material arrives, and a full kitchen remodel runs longer. A typical swap is scheduled in advance, and measurements and fabrication happen first. If your job touches cabinets or a backsplash, we plan those stages together.
We identify your colorway and thickness from the fabricator’s label or a sample, then match it through vetted stone fabricators who carry genuine Silestone or a quality equivalent. We don’t stock parts on a truck. Because exact color matches aren’t always available, we confirm the finish with you before fabricating. Call (844) 761-9356 to start your free estimate.
Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with Silestone. We partner with leading brands across the trades, including KraftMaid, Cambria, and Kohler, so you’re choosing quality materials rather than whatever’s convenient. From foundation to finish line, we handle the whole Silestone kitchen remodel in The Hammocks.
Ready to price your Silestone kitchen in The Hammocks? Call (844) 761-9356 for a free estimate and design consult. Our number is answered live, day or night. You can also take $1,000 off projects over $10,000 and use 0% financing for 18 months to make the work easier on your budget.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.