A Groundwork company - serving The Hammocks, FL

Schluter Home Additions & ADU in The Hammocks, FL

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Home Additions & ADU: The The Hammocks Owner’s Guide

We install Schluter-spec home additions and ADUs in The Hammocks, with finished projects typically landing between $45,000 and $130,000 depending on size, footprint, and finish level. ADUs run $90,000 to $220,000, and garage conversions sit at $30,000 to $80,000. On a additions project, Schluter matters most at the wet areas and floor transitions – the bonded waterproofing membranes, shower trays, edge profiles, and uncoupling mats that keep moisture out of a new slab-on-grade build in South Florida’s humidity.

Call (844) 761-9356

Owners usually find the problem after the fact, not before. A shower niche in the new addition starts weeping behind the tile. Grout at a curb or shower pan cracks in a straight line. A Schluter edge profile pops loose where the new floor meets the old slab, and you can feel the lip with a bare foot.

Which Schluter Models This Applies To

Schluter isn’t one product – it’s a family of systems, and knowing which one is sitting in your addition determines everything about the replacement. The DITRA and DITRA-HEAT uncoupling membranes handle tile floors over concrete and plywood. KERDI and KERDI-BAND carry the waterproofing at showers, steam rooms, and wet-area tile. The KERDI-SHOWER line covers pre-sloped trays and drain assemblies. SCHIENE, JOLLY, and RONDEC are the metal edge profiles that finish the exposed tile edges.

The compatibility gotcha most owners miss: Schluter profiles are sized to the tile thickness, not the floor height. A SCHIENE profile built for 5/16 in. tile (SCH5) won’t cap a 3/8 in. porcelain edge cleanly. Match the number to the tile thickness stamped on the box, not the tile face size. Original Schluter parts and certified systems differ from a generic tile-edge strip because the perimeter has a specific anchoring leg and a factory-formed flange; aftermarket strips are often thinner metal or missing the fleece backing that bonds to thinset.

Label check: every Schluter carton shows the product line, the profile size, and the lot. Photograph the label before you order a replacement; the SKU tells us the exact part without guesswork. We’re an independent service provider in The Hammocks – we’re not affiliated with Schluter, but we know the product line well enough to source the right one.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Home Additions & ADU Is Failing

  • Grout cracks in a straight seam at the shower pan or curb. That usually means the KERDI waterproofing wasn’t lapped or bonded correctly, or the tray wasn’t set level – water is wicking under the tile.
  • Dark or damp tiles that don’t dry between showers. The membrane under that tile has failed, and moisture is trapped where it shouldn’t be, feeding mold and efflorescence.
  • Edge profiles lifting at a floor transition. A loose SCHIENE or RONDEC means the thinset didn’t grip the anchoring leg, often because the tile was cut too close to the profile.
  • A hollow or soft spot in the new floor tile. The DITRA membrane may be delaminating from the slab – common when the slab wasn’t fully cured or was too damp at install.
  • Lippage you can feel with a bare foot where the addition meets the original house. Uncoupling mats need a clean seam; a mis-set mat shows up as a lip that never flattens out.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacement cost in The Hammocks depends on scope. A single failed profile or a re-set floor transition runs small; a shower membrane rebuild inside the addition runs into the thousands. Here’s the honest line-item picture for a home addition project with Schluter waterproofing and flooring components:

  • Home addition, full scope with wet-area Schluter systems: $45,000 – $130,000
  • ADU construction: $90,000 – $220,000
  • Garage conversion: $30,000 – $80,000
  • Waterproofing and tile repair inside an existing addition: quoted by the repair, not by the part

The number you see on our written estimate is the number you pay – no change orders buried in the fine print. That price includes the correct Schluter part, licensed installation, and the 730-Day Done Right Promise. If the work isn’t done right, we make it right.

DIY or Call Us?

You can safely check a Schluter install without tools: run a bare hand along the profile edge, look for grout cracks that travel in a line, press a towel into a tile at the shower corner and look for water seeping up, and photograph the label on any loose material. That tells you whether the part failed or the install did.

What you shouldn’t do yourself: pull the tile on a wet-area floor or shower wall to inspect the membrane. Behind that tile is a waterproofing system, a pre-sloped pan, and a drain bond flange – the exact assembly that keeps thousands of gallons per year out of your slab. A wrong repair on a KERDI shower pan means a second full rebuild in a year, not a fix. The most common DIY mistake is adding caulk or surface sealer over a failed membrane, which traps the moisture instead of stopping it.

If you’re unsure whether the Schluter part or the install is at fault, call (844) 761-9356 – we’ll diagnose it and quote the real fix, free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch