Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Driveway & Pavers: The The Hammocks Owner’s Guide
We install Plant Prefab-compatible driveway and paver systems in The Hammocks, and a full paver driveway typically lands between $7,000 and $18,000 depending on square footage and the paver series you pick. Most plant-based and prefab homes in The Hammocks fall into that range, with concrete alternatives running $4,500 to $12,000. If a panel has heaved or a paver run has settled, we can usually schedule a free estimate within a few days and most residential jobs are completed in a single visit once materials land.
Owners tend to discover the problem one of two ways: a paver section near the driveway apron shifts underfoot after a wet season, or the base prep under the prefab slab edge shows a crack line tracing back toward the garage. The Hammocks sits on some of the flattest, most poorly drained ground in Miami-Dade, and prefab home footprints concentrate water at the driveway edge in ways traditional masonry homes don’t. That’s usually where the failure starts.
Which Plant Prefab Models This Applies To
Plant Prefab builds modular and panelized homes, and their site packages don’t include the driveway or hardscape scope. That means the driveway and paver field on a Plant Prefab home in The Hammocks was almost always specified by the general contractor or the owner separately. There’s no “Plant Prefab part number” for a paver – what matters is matching the finished grade and load tolerance to how the home was set on its foundation.
Here’s the compatibility gotcha most people miss: Plant Prefab homes are set on either a stem-wall or slab-on-grade foundation, and the driveway apron has to meet the finished floor elevation at a specific slope (typically 2% to 4% away from the home). If your paver base was built to a generic spec instead of the actual home set elevation, you’ll get ponding and edge settlement within a couple of seasons. Measure from the top of your foundation stem wall down to your existing driveway edge before you order anything.
The OEM-versus-aftermarket decision is really a paver-series decision. Plant Prefab doesn’t manufacture pavers; the material on your home came from a hardscape manufacturer. Belgard is our go-to for this, and we also install systems compatible with the same base prep standards used on KraftMaid, Cambria, and Silestone projects we handle inside the home. Match the paver thickness (60mm minimum for driveways, 80mm for heavy load) and the joint sand spec, and you’re compatible regardless of which panel system your home uses.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Driveway & Pavers Is Failing
- Ponding along the driveway edge after rain. This usually means the paver base wasn’t sloped away from the home at 2% or the poly sand has washed out. In The Hammocks, both happen fast because the water table sits high and there’s nowhere for runoff to go.
- Paver sections that rock or sink underfoot. A moving paver almost always means base failure, not a bad paver. Water got under the field and softened the compacted aggregate.
- Sand joints that wash out every wet season. Polymeric sand failing within 12 months is a sign of either the wrong joint sand or an unsealed base. It’s a cheap fix early and a full re-lay later.
- Hairline cracks tracing from the garage apron toward the home. On prefab homes this often relates to the transition between the modular foundation and the driveway slab. Worth a look before it becomes a trip hazard.
- Efflorescence – white chalky staining on the pavers. Common in South Florida humidity, and it usually means moisture is moving through the paver bed. Cosmetic at first, but repeated bloom points to a drainage problem worth correcting.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in The Hammocks for the driveway and paver scope:
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range: square footage, base conditions (a failing base adds excavation and haul-off), paver series and thickness, edging and joint sand, and whether we tie into the existing appron or replace it. Parts-plus-labor is quoted separately on the written estimate so you see exactly what the materials cost and what the install costs. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right. Upfront pricing, no surprises.
DIY or Call Us?
You can safely handle the visual checks yourself: photograph the ponding after a heavy rain, measure from the foundation edge to the driveway to confirm slope, and check whether joint sand is washing out. Replacing a paver field is a different matter. The failure is almost never the paver – it’s the base underneath, and if you lay pavers over a soft or under-compacted base you’ll be back where you started in a season.
There’s no high-tension or electrical danger here, but a badly built driveway apron creates a real trip-and-fall hazard and can channel water against your foundation, which is a much bigger repair than the driveway. Most jobs in The Hammocks are completed in a single visit for a standard driveway width. Call (844) 761-9356 for a free estimate.
FAQs
Fifteen to twenty-five years is realistic in The Hammocks when the base is built correctly and joint sand is topped off every two to three years. The pavers themselves last longer; the base and joint sand are what determine the lifespan. Salt air and heavy summer rain speed up the joint sand cycle, so plan on proactive sealing. Call (844) 761-9356 for a quote – estimates are free.
Often yes, and it’s the better call if the base under the majority of the field is still solid. Spot repairs – resetting the settled section, re-compacting the base, re-sanding the joints – solve most issues for a fraction of a full replacement. If more than roughly a third of the field is moving, a full re-lay is typically the smarter spend. Call (844) 761-9356 for an assessment – estimates are free.
A standard residential driveway in The Hammocks is typically a three-to-five-day job once materials land: one day for demolition and base prep, one to two days for compaction and setting bed, one to two days for paver laying, cutting, and joint sand. Smaller patio sections can be done in a single visit. Call (844) 761-9356 to schedule your free estimate.
We match your paver to the load and slope requirements of your specific foundation, then source through our curated brand partners – Belgard is our primary hardscape line. Plant Prefab doesn’t manufacture pavers, so the real question is base prep and paver spec, not brand lock-in. We quote the part and labor on one line-item estimate. Call (844) 761-9356 for a free estimate.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.