Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors: The The Hammocks Owner’s Guide
We install PGT-compatible windows and doors throughout The Hammocks, and typical installed pricing runs $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated units, with most single-unit swaps finished in a day. PGT is Florida’s largest window and door manufacturer, so parts aren’t the problem – matching the right series and profile to your home is. The harder part is knowing which series you actually have before you order anything.
Owners in The Hammocks usually find out something’s wrong the same way: a window that won’t latch when the afternoon storm rolls in, a door that drags on its track in August but slides fine in January, or a fogged glass pane that never clears. The hardware or seal has failed, not the frame. That’s usually a same-week fix, not a full replacement.
Key takeaways
- Most PGT failures in The Hammocks are hardware or seal failures, not frame failures.
- Series matters more than brand. A PGT WinGuard window and a PGT Aluminum series window share almost no parts.
- Installed window replacement in The Hammocks runs $4,500 – $15,000; impact units run $8,000 – $25,000.
- We’re an independent service provider and not affiliated with PGT – we work with their parts and against their specs.
Which PGT Models This Applies To
PGT makes several window and door series, and each one uses different operators, hinges, rollers, locks, and weather seals. The two most common in The Hammocks homes are WinGuard (impact-rated vinyl and aluminum) and the Aluminum Series used on older construction. There’s also the PGT Hurricane Shield line on newer builds and PGT Sliding Glass Doors, which use a totally different roller and track system than the windows.
Here’s the compatibility gotcha that trips up most homeowners: PGT has changed hinge and operator designs within the same series name multiple times. A casement operator ordered for a 2010 WinGuard window will not bolt to a 2015 model – same series, different mounting pattern. This is why ordering “a PGT casement operator” from an online seller without checking the label usually ends with a return.
To identify your window correctly:
- Find the AAMA label on the top or side of the frame. It lists the series, size code, impact rating, and manufacture date.
- Measure the visible glass (not the frame) for seal and sash replacements. PGT sizes in 1/8″ increments, and a 1/16″ error means the sash won’t seat.
- Photograph the failed part with a ruler in the frame. Hinge arms and rollers look nearly identical across series until you measure them.
We can source either an OEM PGT part or a quality aftermarket equivalent, and we’ll tell you which we recommend for your specific window – aftermarket rollers and locks from major suppliers often outlast original parts on older units. We don’t carry parts on a truck; the part gets matched to your label and ordered for your job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Windows & Doors Is Failing
South Florida’s salt air, humidity swings, and UV load wear through window hardware faster than in any other climate in the country. These are the five failures we see on PGT units in The Hammocks most often:
- A window that won’t latch flush during a storm. The lock cam is worn or the sash has shifted on its hinge – usually an alignment or lock-set replacement, not a new window.
- Fogging between the glass panes. The insulated glass seal has failed, letting humid air in. In The Hammocks, this shows up fastest on west-facing windows that take the afternoon sun.
- A sliding door that drags or jumps. Rollers have flattened, or the track has corrosion buildup from humidity. Rollers are a fast fix; a corroded track usually means the whole assembly.
- A casement that hangs and won’t close cleanly. The operator (the crank mechanism) has stripped internal threads. This is the #1 PGT casement failure after roughly 10 – 12 years in coastal Florida.
- Water weeping past the sill after heavy rain. Weatherstripping and sweep seals have hardened. Left alone, it reaches the wall cavity. Fix it while it’s a seal, not a wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how it breaks down for The Hammocks homeowners, so you know what you’re paying for before the truck pulls up:
- Standard window replacement (whole unit): $4,500 – $15,000 for a typical home
- Impact window installation: $8,000 – $25,000, higher because the units themselves carry more cost
- Hardware or seal repair on a single unit: most jobs land well under a full replacement – we’ll price the exact part plus labor before any work starts
What drives the range: number of units, whether you have standard or impact glazing, second-story access, and whether the frame is salvageable. On most PGT repairs, the frame is fine and only the part needs swapping – that’s a fraction of replacement cost.
We quote upfront, and the number you see is the number you pay. No change orders, no hidden “shop materials” line, and 0% financing for 18 months on larger jobs plus $1,000 off projects over $10,000. Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
Some window and door fixes are genuinely safe to handle yourself: cleaning a track, replacing a visible lock cam, tightening screws on a hinge that’s just worked loose. Those are fine.
Where DIY goes wrong on PGT units is the tempered glass, impact glazing, and structural anchor work. Impact-rated windows are heavy and the factory seal has to be reinstalled to spec – a bad reseal voids the unit’s rating and lets water in, which in The Hammocks is the failure you’ll see six months down the road. Casement operators also have to match the mounting pattern exactly; a part that “looks close” won’t seat, and forcing it cracks the sash. And any work at height on a second story is a hard stop – the risk isn’t worth it.
If you’re not sure which category your problem falls into, that’s the moment to call us. Our technicians have up to 12 years of experience matching PGT parts to series and installing to spec. Call (844) 761-9356 and we’ll help you sort out the right fix.
FAQs
The frame lasts 25 – 30 years; the hardware and seals inside it last about 10 – 15. Coastal humidity and UV exposure in The Hammocks push the hardware toward the shorter end, and the insulated glass seal typically fails first on the sun-exposed side. That’s the point most owners assume the whole window is done, when really it’s a seal replacement.
Yes, in most cases. A failed lock, roller, hinge, or operator on a PGT unit is a straight swap, and a failed glass seal can be re-glazed without replacing the frame. We’ll tell you honestly if the cost of repair approaches the cost of replacement – that’s about the only time we’ll recommend replacing the unit instead.
A single hardware or seal repair is usually under two hours. Whole-unit replacement takes a half day to a full day per window depending on access. We’ll give you a real timeline when we quote the job, and most work is completed in a single visit.
We start from your AAMA label, photograph the failed part to scale, and match it to the exact series and vintage. Then we order OEM PGT or a quality aftermarket equivalent based on which will hold up better for your window. We don’t claim a local parts stockpile – the part gets picked for your job, not pulled off a shelf.
If your PGT window or door in The Hammocks isn’t closing, latching, or sealing right, the fix is usually faster and cheaper than you’d guess. We’re an independent service provider – not affiliated with PGT, and we work on KraftMaid, Cambria, and Silestone projects too – and we handle the whole job from diagnosis to install. We answer our phone with a live person 24/7, and every technician arrives background-checked and in uniform. Call (844) 761-9356 for a free estimate.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.