Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The The Hammocks Owner’s Guide
PGT bathroom remodeling work in The Hammocks typically runs $9,000 to $28,000 installed, and the range depends on what’s behind the wall as much as what goes in front of it. PGT is best known for impact-rated windows and doors, and the bathrooms we see in The Hammocks often have PGT glass and door units mixed into older tile and plumbing that was never built to match. The most common discovery is a failing shower pan, a soft subfloor around the toilet, or a window frame that’s been quietly letting Florida humidity into the wall cavity for years.
Once the window or door assembly is suspect, the remodel stops being cosmetic. The window unit has to come out cleanly, the rough opening has to be re-flashed, and the interior finish has to be redone without cracking the surrounding wall.
Key Takeaways
- Installed PGT-compatible bathroom remodeling in The Hammocks: $9,000 – $28,000.
- PGT window and door units in bathrooms fail at the frame and seal long before the glass.
- We’re an independent contractor. We are not PGT, and we’re not affiliated with PGT.
- Every project is backed by the 730-Day Done Right Promise.
- Call (844) 761-9356 for a free project estimate and design consult.
Which PGT Models This Applies To
PGT builds a wide range of impact-rated window and door products, and the model matters because the part has to match the series, not just the opening size. Bathroom applications typically involve horizontal sliders, fixed lites, and smaller casement or awning units, plus door assemblies on anything opening onto a lanai or courtyard.
Here’s the practical issue most homeowners hit: window parts are matched to the series and production run, not just the visible dimensions. Two PGT bathroom windows that measure the same 36 x 24 will not necessarily take the same sash, lock, or screen frame if they came from different series or different years. That means the label on the glass spacer matters more than the tape measure.
How to identify what you actually have:
- Find the PGT label on the glass spacer or the inner frame face. Photograph it.
- Look at the frame profile. Sloped exterior sill and a snap-in interior stop points to one series; a flatter, more minimal profile points to another.
- Note the hardware. Lock style and screen track placement vary by series and are often the fastest way to narrow the model.
- Measure the rough opening, not the glass. Glass size alone will lead you to the wrong part.
On the OEM-versus-aftermarket question, the honest answer depends on the part. For structural or weather-seal components like sash, glazing, and frame extrusions, matching PGT OEM is usually the right call because the assembly is rated as a system and the impact rating is tied to the whole unit. For wear items – locks, rollers, screen frames, weatherstripping – a quality equivalent from a manufacturer that explicitly lists your series and size is often the more practical choice, especially when the original part is on lead time. We won’t claim a part is OEM when it isn’t, and we won’t install a substitute on a rated unit without telling you what it means for the rating.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Bathroom Remodeling Is Failing
Bathroom remodeling in The Hammocks rarely fails all at once. It fails in a sequence, and the first sign is usually something you’d overlook.
- Water on the interior sill after a storm. The head or sill seal has degraded, or the unit was installed without proper shimming and the frame has racked slightly. In South Florida rain events, a compromised seal shows up fast.
- Cloudy or fogged glass. The sealed unit’s desiccant is spent and the perimeter seal has failed. The glass will not clear on its own, and whether the unit still holds its impact rating depends on how the assembly was made, which is why we check the label before anything else.
- Sticking or hard-to-latch hardware. Settling, humidity swelling, or a lock that’s simply worn out. In bathrooms, steam accelerates hardware wear, and rollers and latches are usually first to go.
- Soft subfloor or a spongy step near the shower. Water has been getting past the pan or the tile for a while. By the time you can feel it, the subfloor and often the door threshold are involved.
- Condensation between the glass and the interior pane, or visible moisture on the interior face. This points to a failing seal plus an interior humidity problem, and the two together mean the room’s ventilation is undersized for the fixture load.
Any one of these is worth a look. Two or more together usually means the remodel scope has expanded past the surface.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For The Hammocks, a full bathroom remodel with PGT window or door replacement built in falls in the $9,000 to $28,000 range. Here’s how the line items break down on a typical project:
| Scope item | Typical installed range |
|---|---|
| Full bathroom remodel (combined scope) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the number up or down: whether the wall has to be opened for the window or door swap, whether the subfloor is sound, whether the pan and waterproofing can be reused, and what level of finish you choose. We quote from a written line-item scope, so parts and labor are separated and you can see exactly what the rated window unit costs versus the tile and plumbing.
The full project is covered by our 730-Day Done Right Promise. Upfront pricing, no surprises, and no change orders mid-job for things that should have been on the original scope.
DIY or Call Us?
Some things you can safely check yourself. Confirm the PGT label on the glass spacer, photograph it, measure the rough opening, note whether the lock is worn or the frame has moved, and test the window’s operation after a rain event to see exactly where water enters. That information is genuinely useful and saves time on the estimate.
What we don’t recommend is replacing a bathroom window or door unit yourself in The Hammocks. These are impact-rated assemblies in a high-wind zone, and the rating depends on the flash pan, the anchoring, the shims, and the weather seal all being done to spec. A unit that’s installed slightly out of square will pass a casual look and leak for years. The same goes for opening a wet wall without knowing whether the subfloor and joists are sound, and for anything involving electrical or plumbing inside a shower wall.
If the scope involves a soft floor, a failing pan, or any window or door work, get it looked at. Call (844) 761-9356 – estimates and design consults are free.
FAQs
How long does a PGT bathroom unit last in The Hammocks climate?
Expect 15 to 25 years for the window or door unit itself, with seals and hardware needing attention sooner. The South Florida combination of humidity, salt air, and intense UV accelerates seal and gasket wear, and a bathroom adds steam on top of that. Hardware and weatherstripping in The Hammocks often need replacing in the 8 to 12 year window. Call (844) 761-9356 for a free assessment – estimates cost nothing.
Can a failing PGT bathroom unit be repaired instead of replaced?
Often yes, especially when the failure is hardware, weatherstripping, or a screen frame rather than the glazing or frame itself. Sealed unit failures usually mean the whole unit needs replacement to preserve the impact rating, but that depends on the specific model and assembly. We check the label and tell you honestly whether repair or replacement makes sense. Call (844) 761-9356 to schedule a free estimate.
How long does the swap take?
A single bathroom window or door replacement is typically a one-day job for the unit itself, with tile and finish work following in the days after. A full bathroom remodel that includes the window or door generally runs two to four weeks depending on tile and plumbing scope. Weather in The Hammocks can shift the schedule, and we’ll tell you at the estimate what we’re planning around. Call (844) 761-9356 for a real timeline.
How do you source the PGT-compatible part?
We identify the series and production run from your label and frame profile, then confirm the exact replacement through supply channels that carry PGT product or a manufacturer-listed equivalent. We don’t carry parts on a truck and we don’t stock inventory. What we do is confirm the part against your specific model before ordering, so you’re not pulling a window twice. Call (844) 761-9356 to start the process.
We also work with KraftMaid, Cambria, and Silestone on cabinetry and surfaces when a bathroom project extends into storage and vanity work. Our technicians have up to 12 years of experience, and every job comes with the 730-Day Done Right Promise. Calls are answered by a live person, 24/7.
Ready to get a real number for your The Hammocks bathroom? Call (844) 761-9356 for a free project estimate and design consult. We’re upfront on pricing, we pull the permits, and we back the work in writing. Customers over $10,000 get $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.