Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Kitchen Remodeling: The The Hammocks Owner’s Guide
Kitchen remodeling built around Moen fixtures in The Hammocks typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether plumbing rough-in has to move. We install Moen-compatible faucets, filtration taps, and pot-filler setups as part of a full kitchen scope, and we schedule most of the work as a planned project rather than an emergency call. Owners usually find the problem late: a slow drip under the sink base, water staining on the cabinet floor, or a faucet handle that no longer swings smoothly through its arc.
Moen parts fail in a predictable order. The cartridge that controls flow and temperature wears first, then the O-rings and seals around it, then the supply connections and the sprayer diverter down the line. In The Hammocks, the harder part is water quality: the area runs on treated municipal supply, and the mineral load accelerates scale on cartridges and aerator screens. If you’re seeing reduced flow or a faucet that needs an extra push to shut off, you’re most likely chasing a cartridge and seal kit rather than a full fixture replacement.
Key Takeaways
- Most Moen kitchen failures trace to the cartridge, not the faucet body.
- Installed kitchen remodeling in The Hammocks: $14,000 – $45,000.
- Moen 1225 and 1222 cartridges are the two you’ll encounter most in kitchen and bath sets.
- Upfront pricing, no surprises: the number we quote is the number you pay.
- Every project is backed by our 730-Day Done Right Promise.
Which Moen Models This Applies To
Moen’s kitchen line splits into a few families you’ll run into across The Hammocks homes: the single-handle pull-down and pull-out models (Arbor, Anabelle, Sleek), the two-handle traditional sets, and the high-arc commercial-style faucets. Each family uses a specific cartridge. The 1225 cartridge (also sold as the 1225B) fits most single-handle kitchen faucets and many bath sets and is the one you’ll meet most often. The 1222 cartridge is the older, smaller-body version. The 1200 series covers a range of two-handle and specialty fixtures. Match the part number to your fixture, not to the model name on the box; homeowners who buy by name alone are the ones who end up returning parts.
To identify your model, look under the sink at the faucet shank or the supply lines. Moen stamps the model number on a tag or on the base of the faucet body. If the tag is gone, take the handle off and measure the cartridge: the 1225 runs about 4 inches long with a wider brass base, while the 1222 is roughly 3 inches and narrower. That difference matters. On OEM versus aftermarket, here’s the honest call: a genuine Moen cartridge costs more and has a longer service life in hard-water conditions, while quality aftermarket cartridges are cheaper and can work fine for a few years. For a full kitchen remodel where you’re opening walls and replacing fixtures anyway, we specify OEM. For a same-day cartridge swap in a rental or a quick fix, aftermarket is defensible. Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with Moen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Kitchen Remodeling Is Failing
- Drip at the spout when the handle is off. The cartridge has worn at the internal seal. A single drop every few seconds adds up to a few hundred gallons a year and often shows as a soft stain on the cabinet floor first.
- The handle moves roughly or squeaks. The cartridge is binding against scale or dry O-rings. This is the earliest sign, and it’s the cheapest to fix before the seal fails outright.
- Reduced flow, especially on the cold side. The aerator screen or the cartridge inlet is clogged with mineral scale. Hammocks water tends to deposit calcium on screens and screen gaskets faster than in many parts of South Florida.
- The sprayer diverter doesn’t switch or the sprayer won’t shut off. The diverter inside the faucet body or the sprayer head itself has failed, and on some models you’re replacing a part and not the whole faucet.
- Water pooling around the faucet base. The base seal has degraded, and water is getting underneath the escutcheon. Left alone, this is the one that can damage the countertop and cabinet deck.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed kitchen remodeling that includes Moen fixtures and the associated plumbing work in The Hammocks runs $14,000 – $45,000. That range reflects the whole kitchen, not the faucet alone: cabinet installation ($4,000 – $13,000), countertop installation ($2,000 – $6,500), a backsplash ($800 – $2,500), and a kitchen island if you’re adding one ($3,000 – $10,000). A small kitchen remodel lands lower, around $9,000 – $20,000. The faucet and the plumbing behind it are a line item inside that scope, and we show it as a separate line so you can see exactly what the fixture and the labor cost.
What drives the range up: relocating the sink and supply lines to move the faucet under a new window, adding a pot filler with a new branch off the hot line, or specifying a filtration tap that needs its own supply valve. What keeps it in the lower half: keeping the sink where it is and replacing the faucet and cartridge in place. Upfront pricing, no surprises from us: we quote the number and stick to it, with no change orders unless you change the scope. All work is covered by our 730-Day Done Right Promise, and most projects can be financed at 0% for 18 months with $1,000 off projects over $10,000.
DIY or Call Us?
There’s no high-tension spring or gas line in a Moen cartridge swap, so you can safely check a few things yourself. Test the flow with the aerator off. Turn the handle and feel for binding. Look under the sink with a flashlight for moisture at the supply connections. If the cartridge itself has to come out, the job turns tricky fast: on the 1225 you need a cartridge puller, and on older brass bodies the cartridge can bind and shear off in the housing, which turns a simple swap into a faucet replacement.
That’s the line we see most often. A homeowner gets the retainer clip off, the cartridge won’t budge, and the housing gets damaged trying to free it. If your fixture is more than 10 or 12 years old and the cartridge is stuck, call us. Most cartridge swaps on accessible fixtures are completed in a single visit. Call (844) 761-9356 to schedule a free estimate before you start pulling on anything.
FAQs
Expect 5 to 10 years in The Hammocks, with the shorter end more common on hard-water taps. Moen rates its cartridges for hundreds of thousands of cycles, but scale and sediment wear the internal seals faster than cycle count does. Call (844) 761-9356 for an exact quote on replacing yours; estimates are free.
Often, yes. A cartridge, O-ring kit, and aerator screen replacement will fix most drips and binding handles on a Moen faucet. Full faucet replacement only makes sense if the body is cracked, the finish is failing, or the cartridge housing is damaged. Call (844) 761-9356 for a free inspection before you decide.
Roughly 30 to 60 minutes on an accessible fixture. Add time if the cartridge is seized or the supply shutoff valve needs replacing too. We schedule most swaps as a single visit. Call (844) 761-9356 to get on the schedule.
We match the part number to your specific fixture, then source from plumbing suppliers who carry genuine Moen parts. We don’t keep parts in stock and we don’t carry parts on a truck, so we order for your job. If your model is discontinued, we’ll tell you before you commit. Call (844) 761-9356 to start a free estimate; we also work with KraftMaid, Cambria, and Silestone on the surrounding kitchen scope.
If you’re planning a kitchen remodel in The Hammocks and you’re tired of chasing a drip under the sink, call (844) 761-9356 for a free project estimate and design consult. We answer with a live person, 24/7. Every project is covered by our 730-Day Done Right Promise, so if it’s not done right, we make it right.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.